- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 790E LC Long Front Part vs. Hitachi ZX470LCR-3
John Deere 790E LC Long Front Part vs. Hitachi ZX470LCR-3
8 reasons to buy John Deere 790E LC Long Front Part:
Swing device
Rotation speed | 10 rev / min and 9 rev / min | 10 % more or 1 rev |
Operation
Hydraulic system overflow valve pressure | 34340 kPa and 34300 kPa | 0 % more or 40 kPa |
Hydraulic pump flow rate | 378 l/min and 720 l/min | 47 % less or 342 l/min |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Specific ground pressure | 44.6 kPa and 83 kPa | 46 % less or 38.4 kPa |
Booms/sections features 1
Maximum excavation depth | 13830 mm and 5790 mm | 58 % more or 8040 mm |
Maximum radius along ground level | 18110 mm and 10210 mm | 44 % more or 7900 mm |
Maximum loading height | 13530 mm and 7320 mm | 46 % more or 6210 mm |
14 reasons to buy Hitachi ZX470LCR-3:
Sizes
Clearance | 723 mm and 460 mm | 36 % more or 263 mm |
Counterweight ground clearance | 1360 mm and 1090 mm | 20 % more or 270 mm |
Width to outside of caterpillar track | 3490 mm and 3390 mm | 3 % more or 100 mm |
Operation
Fuel Capacity | 725 l. and 310 l. | 57 % more or 415 l. |
Cooling system fluid volume | 55 l. and 22 l. | 60 % more or 33 l. |
Hydraulic system fluid volume | 560 l. and 260 l. | 54 % more or 300 l. |
Engine oil volume | 57 l. and 19 l. | 67 % more or 38 l. |
Boom reach drive mechanism fluid volume | 6.5 l. and 5.7 l. | 12 % more or 0.8 l. |
Motor
Effective power | 260 kW and 116 kW | 55 % more or 144 kW |
Displacement | 15.7 l. and 6.8 l. | 57 % more or 8.9 l. |
Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Maximum torque | 1580 Nm and 630 Nm | 60 % more or 950 Nm |
Carrier
Track shoes number per side | 53 and 51 | 4 % more or 2 |
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Neutral reasons:
Sizes
Height to cab upper part | 2920 mm and 3450 mm |
Rear platform swing radius | 2940 mm and 3645 mm |
Caterpillar track length on ground level | 3840 mm and 4470 mm |
Operation
Working weight | 23383 kg and 48900 kg |
Motor
Manufacturer | John Deere and Isuzu |
Model | 6068T and AH-6WG1XYSA-01 |
Aspiration | turbocharging and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Track width | 2590 mm and 2890 mm |
Shoe dimensions | 600 mm and 600 mm |
Rolling bearings number on either side | 9 and 9 |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Booms/sections features 1
Maximum cut height | 15780 mm and 10660 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 3490 mm |
4. Caterpillar track length on ground level | 3840 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 460 mm | 5. Clearance | 723 mm |
7. Height to cab upper part | 2920 mm | 7. Height to cab upper part | 3450 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 3645 mm |
15. Counterweight ground clearance | 1090 mm | 15. Counterweight ground clearance | 1360 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2890 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 13700 mm | 1. Unit load-transfer length | 11910 mm |
3. Unit load-transfer height | 3250 mm | 3. Unit load-transfer height | 3480 mm |
9. Maximum cut height | 15780 mm | 9. Maximum cut height | 11060 mm |
10. Maximum loading height | 13530 mm | 10. Maximum loading height | 7650 mm |
11. Maximum radius along ground level | 18110 mm | 11. Maximum radius along ground level | 11840 mm |
13. Maximum excavation depth | 13830 mm | 13. Maximum excavation depth | 7770 mm |