- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 790E LC vs. Hyundai R210-7H
John Deere 790E LC vs. Hyundai R210-7H
9 reasons to buy John Deere 790E LC:
Sizes
Width to outside of caterpillar track | 3190 mm and 2800 mm | 12 % more or 390 mm |
Counterweight ground clearance | 1090 mm and 1060 mm | 3 % more or 30 mm |
Operation
Hydraulic system fluid volume | 260 l. and 180 l. | 31 % more or 80 l. |
Hydraulic pump flow rate | 378 l/min and 440 l/min | 14 % less or 62 l/min |
Motor
Power measured at | 2100 rev / min and 1950 rev / min | 7 % more or 150 rev |
Maximum torque | 630 Nm and 558.6 Nm | 11 % more or 71.4 Nm |
Carrier
Hook traction force | 176.5 kN and 187.7 kN | 6 % less or 11.2 kN |
Specific ground pressure | 45 kPa and 4700 kPa | 99 % less or 4655 kPa |
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
10 reasons to buy Hyundai R210-7H:
Swing device
Rotation speed | 12.5 rev / min and 10 rev / min | 20 % more or 2.5 rev |
Sizes
Clearance | 480 mm and 460 mm | 4 % more or 20 mm |
Operation
Fuel Capacity | 340 l. and 310 l. | 9 % more or 30 l. |
Hydraulic system overflow valve pressure | 36000 kPa and 34340 kPa | 5 % more or 1660 kPa |
Motor
Effective power | 117.1 kW and 116 kW | 1 % more or 1.1 kW |
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Booms/sections features 1
Maximum excavation depth | 6740 mm and 6310 mm | 6 % more or 430 mm |
Maximum radius along ground level | 9780 mm and 9530 mm | 3 % more or 250 mm |
Maximum loading height | 6670 mm and 6530 mm | 2 % more or 140 mm |
Maximum vertical wall digging depth | 6120 mm and 5400 mm | 12 % more or 720 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2920 mm and 2920 mm |
Rear platform swing radius | 2940 mm and 2770 mm |
Caterpillar track length on ground level | 3840 mm and 3360 mm |
Operation
Working weight | 23462 kg and 20800 kg |
Motor
Manufacturer | John Deere and Hyundai |
Model | 6068T and D6BT-C |
Carrier
Track width | 2590 mm and 2390 mm |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 9 and 9 |
Booms/sections features 1
Unit load-transfer height | 3250 mm and 2990 mm |
Unit load-transfer length | 10260 mm and 9520 mm |
Maximum cut height | 9410 mm and 9470 mm |
Images
Sizes
4. Caterpillar track length on ground level | 3840 mm | 4. Caterpillar track length on ground level | 3360 mm |
5. Clearance | 460 mm | 5. Clearance | 480 mm |
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 2800 mm |
7. Height to cab upper part | 2920 mm | 7. Height to cab upper part | 2920 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 2770 mm |
15. Counterweight ground clearance | 1090 mm | 15. Counterweight ground clearance | 1060 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2390 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 7600 mm | 13. Maximum excavation depth | 6740 mm |
1. Unit load-transfer length | 10180 mm | 1. Unit load-transfer length | 9520 mm |
3. Unit load-transfer height | 3270 mm | 3. Unit load-transfer height | 2990 mm |
9. Maximum cut height | 9980 mm | 9. Maximum cut height | 9470 mm |
10. Maximum loading height | 7100 mm | 10. Maximum loading height | 6670 mm |
11. Maximum radius along ground level | 10730 mm | 11. Maximum radius along ground level | 9780 mm |
12. Maximum vertical wall digging depth | 6740 mm | 12. Maximum vertical wall digging depth | 6120 mm |