- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 892D LC vs. Hitachi ZX670LCH-3
John Deere 892D LC vs. Hitachi ZX670LCH-3
8 reasons to buy John Deere 892D LC:
Swing device
| Rotation speed | 12 rev / min and 9.5 rev / min | 21 % more or 2.5 rev |
Operation
| Hydraulic pump flow rate | 546 l/min and 912 l/min | 40 % less or 366 l/min |
| Hydraulic system overflow valve pressure | 34340 kPa and 34300 kPa | 0 % more or 40 kPa |
Motor
| Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
| Track shoes number per side | 50 and 47 | 6 % more or 3 |
| Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
| Specific ground pressure | 56.3 kPa and 101 kPa | 44 % less or 44.7 kPa |
Booms/sections features 1
| Maximum vertical wall digging depth | 5610 mm and 5280 mm | 6 % more or 330 mm |
22 reasons to buy Hitachi ZX670LCH-3:
Sizes
| Width to outside of caterpillar track | 3950 mm and 3190 mm | 19 % more or 760 mm |
| Clearance | 860 mm and 480 mm | 44 % more or 380 mm |
| Counterweight ground clearance | 1530 mm and 1190 mm | 22 % more or 340 mm |
Shovel
| Bucket initial volume | 1.8 m3 and 1.3 m3 | 28 % more or 0.5 m3 |
Operation
| Hydraulic system fluid volume | 680 l. and 330 l. | 51 % more or 350 l. |
| Engine oil volume | 57 l. and 24 l. | 58 % more or 33 l. |
| Boom reach drive mechanism fluid volume | 10.5 l. and 10 l. | 5 % more or 0.5 l. |
| Fuel Capacity | 900 l. and 510 l. | 43 % more or 390 l. |
| Cooling system fluid volume | 57 l. and 34 l. | 40 % more or 23 l. |
Motor
| Effective power | 345 kW and 145 kW | 58 % more or 200 kW |
| Displacement | 15.7 l. and 7.6 l. | 52 % more or 8.1 l. |
| Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
| Maximum torque | 1980 Nm and 827 Nm | 58 % more or 1153 Nm |
Carrier
| Support rollers number on either side | 3 and 2 | 33 % more or 1 |
| Maximum travel speed | 4.9 km/h and 4.2 km/h | 14 % more or 0.7 km/h |
Booms/sections features 2
| Maximum loading height | 8020 mm and 7110 mm | 11 % more or 910 mm |
| Maximum excavation depth | 8560 mm and 7390 mm | 14 % more or 1170 mm |
| Maximum vertical wall digging depth | 7720 mm and 6480 mm | 16 % more or 1240 mm |
| Maximum radius along ground level | 13030 mm and 10900 mm | 16 % more or 2130 mm |
Booms/sections features 1
| Maximum excavation depth | 7120 mm and 6830 mm | 4 % more or 290 mm |
| Maximum radius along ground level | 11500 mm and 10360 mm | 10 % more or 1140 mm |
| Maximum loading height | 7330 mm and 6800 mm | 7 % more or 530 mm |
Neutral reasons:
Sizes
| Rear platform swing radius | 3280 mm and 3850 mm |
| Caterpillar track length on ground level | 4010 mm and 4590 mm |
| Height to cab upper part | 2990 mm and 3590 mm |
Operation
| Working weight | 30658 kg and 67300 kg |
Motor
| Manufacturer | John Deere and Isuzu |
| Model | 6466A and AH-6WG1XYSA-02 |
| Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
| Cylinders number | 6 and 6 |
Carrier
| Shoe dimensions | 600 mm and 650 mm |
| Track width | 2590 mm and 3300 mm |
Booms/sections features 2
| Unit load-transfer length | 10920 mm and 13200 mm |
| Maximum cut height | 10210 mm and 11940 mm |
| Unit load-transfer height | 3300 mm and 4460 mm |
Booms/sections features 1
| Maximum cut height | 9830 mm and 11190 mm |
Images
Sizes
| 2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 3950 mm |
| 4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 4590 mm |
| 5. Clearance | 480 mm | 5. Clearance | 860 mm |
| 7. Height to cab upper part | 2990 mm | 7. Height to cab upper part | 3590 mm |
| 8. Rear platform swing radius | 3280 mm | 8. Rear platform swing radius | 3850 mm |
| 15. Counterweight ground clearance | 1190 mm | 15. Counterweight ground clearance | 1530 mm |
Carrier
| 6. Track width | 2590 mm | 6. Track width | 3300 mm |
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 650 mm |
Booms/sections features 1
| 9. Maximum cut height | 10210 mm | 9. Maximum cut height | 11940 mm |
| 11. Maximum radius along ground level | 10360 mm | 11. Maximum radius along ground level | 13030 mm |
| 12. Maximum vertical wall digging depth | 5610 mm | 12. Maximum vertical wall digging depth | 7720 mm |
| 10. Maximum loading height | 7110 mm | 10. Maximum loading height | 8020 mm |
| 13. Maximum excavation depth | 6830 mm | 13. Maximum excavation depth | 8560 mm |
| 1. Unit load-transfer length | 10920 mm | 1. Unit load-transfer length | 13200 mm |
| 3. Unit load-transfer height | 3300 mm | 3. Unit load-transfer height | 4460 mm |