- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 892E LC Long Front Part vs. Hitachi EX100M-5
John Deere 892E LC Long Front Part vs. Hitachi EX100M-5
16 reasons to buy John Deere 892E LC Long Front Part:
Sizes
Width to outside of caterpillar track | 3390 mm and 2740 mm | 19 % more or 650 mm |
Counterweight ground clearance | 1175 mm and 1100 mm | 6 % more or 75 mm |
Operation
Fuel Capacity | 510 l. and 250 l. | 51 % more or 260 l. |
Cooling system fluid volume | 32 l. and 18.4 l. | 42 % more or 13.6 l. |
Hydraulic system fluid volume | 310 l. and 134 l. | 57 % more or 176 l. |
Engine oil volume | 28 l. and 14.7 l. | 47 % more or 13.3 l. |
Boom reach drive mechanism fluid volume | 13 l. and 3.2 l. | 75 % more or 9.8 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 7.6 l. and 4.3 l. | 43 % more or 3.3 l. |
Maximum torque | 881 Nm and 284 Nm | 68 % more or 597 Nm |
Effective power | 164 kW and 56.7 kW | 65 % more or 107.3 kW |
Carrier
Rolling bearings number on either side | 9 and 6 | 33 % more or 3 |
Track shoes number per side | 50 and 42 | 16 % more or 8 |
Booms/sections features 1
Maximum excavation depth | 13770 mm and 4580 mm | 67 % more or 9190 mm |
Maximum radius along ground level | 18250 mm and 7250 mm | 60 % more or 11000 mm |
Maximum loading height | 13480 mm and 5730 mm | 57 % more or 7750 mm |
8 reasons to buy Hitachi EX100M-5:
Swing device
Rotation speed | 13.5 rev / min and 12 rev / min | 11 % more or 1.5 rev |
Sizes
Clearance | 595 mm and 500 mm | 16 % more or 95 mm |
Operation
Hydraulic system overflow valve pressure | 33715.3 kPa and 29440 kPa | 13 % more or 4275.3 kPa |
Hydraulic pump flow rate | 190 l/min and 546 l/min | 65 % less or 356 l/min |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Carrier
Specific ground pressure | 27.4 kPa and 45 kPa | 39 % less or 17.6 kPa |
Maximum travel speed | 4.4 km/h and 4.2 km/h | 5 % more or 0.2 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 3010 mm and 2930 mm |
Rear platform swing radius | 3290 mm and 2130 mm |
Caterpillar track length on ground level | 4010 mm and 2900 mm |
Operation
Working weight | 29538 kg and 12383.1 kg |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration |
Manufacturer | John Deere and Isuzu |
Model | 6076A and A-4BG1 |
Carrier
Shoe dimensions | 600 mm and 700 mm |
Support rollers number on either side | 2 and 2 |
Track width | 2590 mm and 2040 mm |
Booms/sections features 1
Unit load-transfer height | 3330 mm and 2930 mm |
Unit load-transfer length | 14330 mm and 7170 mm |
Maximum cut height | 15230 mm and 8140 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 2740 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 2900 mm |
5. Clearance | 500 mm | 5. Clearance | 595 mm |
7. Height to cab upper part | 3010 mm | 7. Height to cab upper part | 2930 mm |
8. Rear platform swing radius | 3290 mm | 8. Rear platform swing radius | 2130 mm |
15. Counterweight ground clearance | 1175 mm | 15. Counterweight ground clearance | 1100 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2040 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 700 mm |
Booms/sections features 1
13. Maximum excavation depth | 13770 mm | 13. Maximum excavation depth | 4580 mm |
1. Unit load-transfer length | 14330 mm | 1. Unit load-transfer length | 7180 mm |
3. Unit load-transfer height | 3330 mm | 3. Unit load-transfer height | 2930 mm |
9. Maximum cut height | 15230 mm | 9. Maximum cut height | 7320 mm |
10. Maximum loading height | 13480 mm | 10. Maximum loading height | 5910 mm |
11. Maximum radius along ground level | 18250 mm | 11. Maximum radius along ground level | 7530 mm |