vs.

      John Deere 892E LC Long Front Part vs. Kato HD1023LC

      15 reasons to buy John Deere 892E LC Long Front Part:

      Swing device

      Rotation speed 12 rev / min and 11 rev / min 8 % more or 1 rev

      Sizes

      Clearance 500 mm and 480 mm 4 % more or 20 mm
      Counterweight ground clearance 1175 mm and 1100 mm 6 % more or 75 mm
      Width to outside of caterpillar track 3390 mm and 3200 mm 6 % more or 190 mm

      Operation

      Fuel Capacity 510 l. and 320 l. 37 % more or 190 l.
      Cooling system fluid volume 32 l. and 25.5 l. 20 % more or 6.5 l.
      Boom reach drive mechanism fluid volume 13 l. and 11.3 l. 13 % more or 1.7 l.
      Generator current strength 42 amperes and 35 amperes 17 % more or 7 amperes

      Motor

      Displacement 7.6 l. and 7.5 l. 1 % more or 0.1 l.
      Maximum torque 881 Nm and 637 Nm 28 % more or 244 Nm
      Full power 173 kW and 125 kW 28 % more or 48 kW

      Carrier

      Specific ground pressure 45 kPa and 47.1 kPa 4 % less or 2.1 kPa

      Booms/sections features 1

      Maximum excavation depth 13770 mm and 6520 mm 53 % more or 7250 mm
      Maximum radius along ground level 18250 mm and 9730 mm 47 % more or 8520 mm
      Maximum loading height 13480 mm and 6810 mm 49 % more or 6670 mm

      7 reasons to buy Kato HD1023LC:

      Operation

      Hydraulic system overflow valve pressure 32900 kPa and 29440 kPa 11 % more or 3460 kPa
      Hydraulic pump flow rate 498 l/min and 546 l/min 9 % less or 48 l/min

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Carrier

      Track shoes number per side 51 and 50 2 % more or 1
      Maximum travel speed 5.5 km/h and 4.2 km/h 24 % more or 1.3 km/h
      Hook traction force 186.3 kN and 227 kN 18 % less or 40.7 kN

      Neutral reasons:

      Sizes

      Height to cab upper part 3010 mm and 2930 mm
      Rear platform swing radius 3290 mm and 3100 mm

      Operation

      Working weight 29538 kg and 23600 kg
      Hydraulic system fluid volume 310 l. and 310 l.
      Engine oil volume 28 l. and 28 l.
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Cylinders number 6 and 6
      Manufacturer John Deere and Mitsubishi
      Model 6076A and C 6D16-TE1

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Support rollers number on either side 2 and 2
      Rolling bearings number on either side 9 and 9
      Track width 2590 mm and 2600 mm

      Booms/sections features 1

      Maximum cut height 15230 mm and 9880 mm

      Images

      Sizes

      8. Rear platform swing radius 3290 mm 8. Rear platform swing radius 3100 mm
      15. Counterweight ground clearance 1175 mm 15. Counterweight ground clearance 1100 mm
      2. Width to outside of caterpillar track 3390 mm 2. Width to outside of caterpillar track 3200 mm
      5. Clearance 500 mm 5. Clearance 480 mm
      7. Height to cab upper part 3010 mm 7. Height to cab upper part 2930 mm

      Carrier

      6. Track width 2590 mm 6. Track width 2600 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      9. Maximum cut height 15230 mm 9. Maximum cut height 10500 mm
      10. Maximum loading height 13480 mm 10. Maximum loading height 7440 mm
      11. Maximum radius along ground level 18250 mm 11. Maximum radius along ground level 11100 mm
      13. Maximum excavation depth 13770 mm 13. Maximum excavation depth 8010 mm