- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 892E LC vs. Komatsu PC800SE-6
John Deere 892E LC vs. Komatsu PC800SE-6
6 reasons to buy John Deere 892E LC:
Swing device
Rotation speed | 12 rev / min and 5.7 rev / min | 52 % more or 6.3 rev |
Operation
Hydraulic pump flow rate | 546 l/min and 988 l/min | 45 % less or 442 l/min |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Maximum travel speed | 5.5 km/h and 4.2 km/h | 24 % more or 1.3 km/h |
Specific ground pressure | 46.9 kPa and 120.7 kPa | 61 % less or 73.8 kPa |
Booms/sections features 1
Maximum vertical wall digging depth | 5610 mm and 4930 mm | 12 % more or 680 mm |
12 reasons to buy Komatsu PC800SE-6:
Sizes
Clearance | 840 mm and 500 mm | 40 % more or 340 mm |
Width to outside of caterpillar track | 4110 mm and 3190 mm | 22 % more or 920 mm |
Counterweight ground clearance | 1555 mm and 1175 mm | 24 % more or 380 mm |
Shovel
Bucket initial volume | 4.3 m3 and 1.8 m3 | 58 % more or 2.5 m3 |
Operation
Fuel Capacity | 880 l. and 510 l. | 42 % more or 370 l. |
Hydraulic system fluid volume | 440 l. and 310 l. | 30 % more or 130 l. |
Hydraulic system overflow valve pressure | 31371.1 kPa and 29440 kPa | 6 % more or 1931.1 kPa |
Motor
Full power | 331 kW and 173 kW | 48 % more or 158 kW |
Displacement | 15.2 l. and 7.7 l. | 49 % more or 7.5 l. |
Booms/sections features 1
Maximum loading height | 7565 mm and 6810 mm | 10 % more or 755 mm |
Maximum excavation depth | 7015 mm and 6840 mm | 2 % more or 175 mm |
Maximum radius along ground level | 11865 mm and 10360 mm | 13 % more or 1505 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3010 mm and 3890 mm |
Rear platform swing radius | 3300 mm and 4300 mm |
Caterpillar track length on ground level | 4010 mm and 4500 mm |
Operation
Working weight | 30595 kg and 74880 kg |
Motor
Manufacturer | John Deere and Komatsu |
Model | 6076A and SAA6D140E |
Cylinders number | 6 and 6 |
Carrier
Track width | 2590 mm and 3500 mm |
Shoe dimensions | 600 mm and 610 mm |
Booms/sections features 1
Maximum cut height | 9850 mm and 11510 mm |
Unit load-transfer height | 3410 mm and 4705 mm |
Unit load-transfer length | 11060 mm and 12870 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 4110 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 4500 mm |
15. Counterweight ground clearance | 1175 mm | 15. Counterweight ground clearance | 1555 mm |
5. Clearance | 500 mm | 5. Clearance | 840 mm |
7. Height to cab upper part | 3010 mm | 7. Height to cab upper part | 3890 mm |
8. Rear platform swing radius | 3300 mm | 8. Rear platform swing radius | 4300 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 3500 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 610 mm |
Booms/sections features 1
13. Maximum excavation depth | 7380 mm | 13. Maximum excavation depth | 7015 mm |
1. Unit load-transfer length | 11010 mm | 1. Unit load-transfer length | 12870 mm |
3. Unit load-transfer height | 3490 mm | 3. Unit load-transfer height | 4705 mm |
9. Maximum cut height | 10600 mm | 9. Maximum cut height | 11510 mm |
10. Maximum loading height | 7490 mm | 10. Maximum loading height | 7565 mm |
11. Maximum radius along ground level | 11680 mm | 11. Maximum radius along ground level | 11865 mm |
12. Maximum vertical wall digging depth | 7360 mm | 12. Maximum vertical wall digging depth | 4930 mm |