vs.

      Kato HD1023II vs. Hitachi ZX180LC

      24 reasons to buy Kato HD1023II:

      Sizes

      Counterweight ground clearance 1100 mm and 1000 mm 9 % more or 100 mm
      Width to outside of caterpillar track 2990 mm and 2800 mm 6 % more or 190 mm
      Clearance 480 mm and 450 mm 6 % more or 30 mm

      Shovel

      Maximum bucket volume 1.5 m3 and 1.2 m3 20 % more or 0.3 m3

      Operation

      Engine oil volume 22 l. and 15.8 l. 28 % more or 6.2 l.
      Boom reach drive mechanism fluid volume 11.3 l. and 6.2 l. 45 % more or 5.1 l.
      Fuel Capacity 380 l. and 280 l. 26 % more or 100 l.
      Cooling system fluid volume 25.5 l. and 19.2 l. 25 % more or 6.3 l.
      Hydraulic system fluid volume 290 l. and 180 l. 38 % more or 110 l.

      Motor

      Displacement 5.9 l. and 4.3 l. 27 % more or 1.6 l.
      Maximum torque 598 Nm and 449 Nm 25 % more or 149 Nm
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Track shoes number per side 47 and 46 2 % more or 1
      Rolling bearings number on either side 8 and 7 12 % more or 1
      Maximum travel speed 5.5 km/h and 5 km/h 9 % more or 0.5 km/h

      Booms/sections features 3

      Maximum excavation depth 8010 mm and 7050 mm 12 % more or 960 mm
      Maximum loading height 7440 mm and 6950 mm 7 % more or 490 mm
      Maximum vertical wall digging depth 7190 mm and 6250 mm 13 % more or 940 mm

      Booms/sections features 2

      Maximum excavation depth 7010 mm and 6560 mm 6 % more or 450 mm
      Maximum loading height 6990 mm and 6580 mm 6 % more or 410 mm
      Maximum vertical wall digging depth 6250 mm and 5540 mm 11 % more or 710 mm

      Booms/sections features 1

      Maximum loading height 6810 mm and 6460 mm 5 % more or 350 mm
      Maximum excavation depth 6520 mm and 6110 mm 6 % more or 410 mm
      Maximum vertical wall digging depth 5750 mm and 5190 mm 10 % more or 560 mm

      7 reasons to buy Hitachi ZX180LC:

      Swing device

      Rotation speed 12.9 rev / min and 11 rev / min 15 % more or 1.9 rev

      Operation

      Generator current strength 50 amperes and 35 amperes 30 % more or 15 amperes
      Hydraulic system overflow valve pressure 34335.9 kPa and 32900 kPa 4 % more or 1435.9 kPa
      Hydraulic pump flow rate 300 l/min and 494 l/min 39 % less or 194 l/min

      Motor

      Power measured at 2200 rev / min and 2150 rev / min 2 % more or 50 rev
      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev

      Carrier

      Specific ground pressure 39 kPa and 50 kPa 22 % less or 11 kPa

      Neutral reasons:

      Sizes

      Rear platform swing radius 2940 mm and 2440 mm
      Caterpillar track length on ground level 3460 mm and 3370 mm
      Height to cab upper part 2940 mm and 2880 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 23000 kg and 17800 kg

      Motor

      Manufacturer Mitsubishi and Isuzu
      Model C 6D34-TL and AA-4BGITCG
      Aspiration turbocharging and Turbocharging with intercooler

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Support rollers number on either side 2 and 2
      Track width 2390 mm and 2200 mm

      Booms/sections features 3

      Maximum cut height 10500 mm and 9780 mm

      Booms/sections features 2

      Maximum cut height 10060 mm and 9390 mm

      Booms/sections features 1

      Maximum cut height 9880 mm and 9280 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2990 mm 2. Width to outside of caterpillar track 2800 mm
      4. Caterpillar track length on ground level 3460 mm 4. Caterpillar track length on ground level 3370 mm
      5. Clearance 480 mm 5. Clearance 450 mm
      7. Height to cab upper part 2940 mm 7. Height to cab upper part 2880 mm
      8. Rear platform swing radius 2940 mm 8. Rear platform swing radius 2440 mm
      15. Counterweight ground clearance 1100 mm 15. Counterweight ground clearance 1000 mm

      Carrier

      6. Track width 2390 mm 6. Track width 2200 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      12. Maximum vertical wall digging depth 7190 mm 12. Maximum vertical wall digging depth 6250 mm
      13. Maximum excavation depth 8010 mm 13. Maximum excavation depth 7050 mm
      9. Maximum cut height 9880 mm 9. Maximum cut height 9780 mm
      10. Maximum loading height 6810 mm 10. Maximum loading height 6950 mm