- Home/
- Comparison/
- Hydraulic Shovel/
- Kato HD1023II vs. Sumitomo SH200-2
Kato HD1023II vs. Sumitomo SH200-2
18 reasons to buy Kato HD1023II:
Sizes
Width to outside of caterpillar track | 2990 mm and 2800 mm | 6 % more or 190 mm |
Clearance | 480 mm and 460 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1100 mm and 1040 mm | 5 % more or 60 mm |
Shovel
Maximum bucket volume | 1.5 m3 and 1.1 m3 | 27 % more or 0.4 m3 |
Operation
Fuel Capacity | 380 l. and 310 l. | 18 % more or 70 l. |
Hydraulic system fluid volume | 290 l. and 200 l. | 31 % more or 90 l. |
Boom reach drive mechanism fluid volume | 11.3 l. and 5 l. | 56 % more or 6.3 l. |
Generator current strength | 35 amperes and 25 amperes | 29 % more or 10 amperes |
Motor
Power measured at | 2150 rev / min and 1900 rev / min | 12 % more or 250 rev |
Maximum torque | 598 Nm and 476 Nm | 20 % more or 122 Nm |
Carrier
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Track shoes number per side | 47 and 46 | 2 % more or 1 |
Booms/sections features 2
Maximum loading height | 6990 mm and 6670 mm | 5 % more or 320 mm |
Maximum excavation depth | 7010 mm and 6690 mm | 5 % more or 320 mm |
Maximum vertical wall digging depth | 6250 mm and 6070 mm | 3 % more or 180 mm |
Booms/sections features 1
Maximum excavation depth | 6520 mm and 6100 mm | 6 % more or 420 mm |
Maximum loading height | 6810 mm and 6460 mm | 5 % more or 350 mm |
Maximum vertical wall digging depth | 5750 mm and 5470 mm | 5 % more or 280 mm |
7 reasons to buy Sumitomo SH200-2:
Swing device
Rotation speed | 11.9 rev / min and 11 rev / min | 8 % more or 0.9 rev |
Operation
Cooling system fluid volume | 25.7 l. and 25.5 l. | 1 % more or 0.2 l. |
Engine oil volume | 25 l. and 22 l. | 12 % more or 3 l. |
Hydraulic system overflow valve pressure | 34323.3 kPa and 32900 kPa | 4 % more or 1423.3 kPa |
Hydraulic pump flow rate | 402 l/min and 494 l/min | 19 % less or 92 l/min |
Motor
Displacement | 6.5 l. and 5.9 l. | 9 % more or 0.6 l. |
Carrier
Specific ground pressure | 43.2 kPa and 50 kPa | 14 % less or 6.8 kPa |
Neutral reasons:
Sizes
Height to cab upper part | 2940 mm and 2860 mm |
Rear platform swing radius | 2940 mm and 2770 mm |
Caterpillar track length on ground level | 3460 mm and 3370 mm |
Operation
Working weight | 23000 kg and 19300 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and turbocharging |
Torque measured at | 1600 rev / min and 1600 rev / min |
Cylinders number | 6 and 6 |
Manufacturer | Mitsubishi and Isuzu |
Model | C 6D34-TL and A-6BG1T |
Carrier
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Shoe dimensions | 600 mm and 600 mm |
Track width | 2390 mm and 2200 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Maximum cut height | 10060 mm and 9470 mm |
Booms/sections features 1
Maximum cut height | 9880 mm and 9260 mm |
Images
Sizes
7. Height to cab upper part | 2940 mm | 7. Height to cab upper part | 2860 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 2770 mm |
15. Counterweight ground clearance | 1100 mm | 15. Counterweight ground clearance | 1040 mm |
2. Width to outside of caterpillar track | 2990 mm | 2. Width to outside of caterpillar track | 2800 mm |
4. Caterpillar track length on ground level | 3460 mm | 4. Caterpillar track length on ground level | 3370 mm |
5. Clearance | 480 mm | 5. Clearance | 460 mm |
Carrier
6. Track width | 2390 mm | 6. Track width | 2200 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 5750 mm | 12. Maximum vertical wall digging depth | 6070 mm |
13. Maximum excavation depth | 6520 mm | 13. Maximum excavation depth | 6690 mm |
9. Maximum cut height | 10060 mm | 9. Maximum cut height | 9470 mm |
10. Maximum loading height | 6990 mm | 10. Maximum loading height | 6670 mm |