- Home/
- Comparison/
- Hydraulic Shovel/
- Kato HD1023IIILC vs. Hitachi EX230H-5
Kato HD1023IIILC vs. Hitachi EX230H-5
10 reasons to buy Kato HD1023IIILC:
Sizes
Width to outside of caterpillar track | 3200 mm and 2990 mm | 7 % more or 210 mm |
Clearance | 480 mm and 460 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1100 mm and 1090 mm | 1 % more or 10 mm |
Shovel
Bucket initial volume | 1.1 m3 and 1 m3 | 9 % more or 0.1 m3 |
Maximum bucket volume | 1.5 m3 and 1.4 m3 | 7 % more or 0.1 m3 |
Operation
Hydraulic system fluid volume | 290 l. and 239 l. | 18 % more or 51 l. |
Motor
Power measured at | 2150 rev / min and 2000 rev / min | 7 % more or 150 rev |
Maximum torque | 620 Nm and 618 Nm | 0 % more or 2 Nm |
Carrier
Track shoes number per side | 51 and 47 | 8 % more or 4 |
Specific ground pressure | 47 kPa and 52 kPa | 10 % less or 5 kPa |
10 reasons to buy Hitachi EX230H-5:
Swing device
Rotation speed | 13.5 rev / min and 11 rev / min | 19 % more or 2.5 rev |
Operation
Hydraulic pump flow rate | 408 l/min and 494 l/min | 17 % less or 86 l/min |
Engine oil volume | 26 l. and 22 l. | 15 % more or 4 l. |
Boom reach drive mechanism fluid volume | 13.2 l. and 11.3 l. | 14 % more or 1.9 l. |
Generator current strength | 40 amperes and 35 amperes | 12 % more or 5 amperes |
Hydraulic system overflow valve pressure | 34335.9 kPa and 32900 kPa | 4 % more or 1435.9 kPa |
Motor
Displacement | 6.7 l. and 5.9 l. | 12 % more or 0.8 l. |
Booms/sections features 1
Maximum excavation depth | 6950 mm and 5950 mm | 14 % more or 1000 mm |
Maximum loading height | 6760 mm and 6550 mm | 3 % more or 210 mm |
Maximum vertical wall digging depth | 6020 mm and 5100 mm | 15 % more or 920 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2940 mm and 2940 mm |
Rear platform swing radius | 2940 mm and 2940 mm |
Operation
Working weight | 23600 kg and 23722.9 kg |
Fuel Capacity | 380 l. and 380 l. |
Cooling system fluid volume | 23 l. and 23 l. |
Motor
Torque measured at | 1600 rev / min and 1600 rev / min |
Aspiration | turbocharging and turbocharging |
Cylinders number | 6 and 6 |
Manufacturer | Mitsubishi and Hino |
Model | C 6D34 TLE2A and H07C-TD |
Carrier
Track width | 2600 mm and 2390 mm |
Shoe dimensions | 600 mm and 600 mm |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Booms/sections features 1
Maximum cut height | 9600 mm and 9630 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3200 mm | 2. Width to outside of caterpillar track | 2990 mm |
5. Clearance | 480 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 2940 mm | 7. Height to cab upper part | 2940 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 2940 mm |
15. Counterweight ground clearance | 1100 mm | 15. Counterweight ground clearance | 1090 mm |
Carrier
6. Track width | 2600 mm | 6. Track width | 2390 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 10060 mm | 9. Maximum cut height | 9630 mm |
10. Maximum loading height | 6990 mm | 10. Maximum loading height | 6760 mm |
13. Maximum excavation depth | 7010 mm | 13. Maximum excavation depth | 6950 mm |
12. Maximum vertical wall digging depth | 6250 mm | 12. Maximum vertical wall digging depth | 6020 mm |