vs.

      Kato HD1023LC vs. John Deere 892E LC Long Front Part

      7 reasons to buy Kato HD1023LC:

      Operation

      Hydraulic pump flow rate 498 l/min and 546 l/min 9 % less or 48 l/min
      Hydraulic system overflow valve pressure 32900 kPa and 29440 kPa 11 % more or 3460 kPa

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Carrier

      Maximum travel speed 5.5 km/h and 4.2 km/h 24 % more or 1.3 km/h
      Track shoes number per side 51 and 50 2 % more or 1
      Hook traction force 186.3 kN and 227 kN 18 % less or 40.7 kN

      15 reasons to buy John Deere 892E LC Long Front Part:

      Swing device

      Rotation speed 12 rev / min and 11 rev / min 8 % more or 1 rev

      Sizes

      Width to outside of caterpillar track 3390 mm and 3200 mm 6 % more or 190 mm
      Clearance 500 mm and 480 mm 4 % more or 20 mm
      Counterweight ground clearance 1175 mm and 1100 mm 6 % more or 75 mm

      Operation

      Fuel Capacity 510 l. and 320 l. 37 % more or 190 l.
      Cooling system fluid volume 32 l. and 25.5 l. 20 % more or 6.5 l.
      Boom reach drive mechanism fluid volume 13 l. and 11.3 l. 13 % more or 1.7 l.
      Generator current strength 42 amperes and 35 amperes 17 % more or 7 amperes

      Motor

      Full power 173 kW and 125 kW 28 % more or 48 kW
      Displacement 7.6 l. and 7.5 l. 1 % more or 0.1 l.
      Maximum torque 881 Nm and 637 Nm 28 % more or 244 Nm

      Carrier

      Specific ground pressure 45 kPa and 47.1 kPa 4 % less or 2.1 kPa

      Booms/sections features 1

      Maximum loading height 13480 mm and 6810 mm 49 % more or 6670 mm
      Maximum excavation depth 13770 mm and 6520 mm 53 % more or 7250 mm
      Maximum radius along ground level 18250 mm and 9730 mm 47 % more or 8520 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2930 mm and 3010 mm
      Rear platform swing radius 3100 mm and 3290 mm

      Operation

      Working weight 23600 kg and 29538 kg
      Hydraulic system fluid volume 310 l. and 310 l.
      Engine oil volume 28 l. and 28 l.
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Mitsubishi and John Deere
      Model C 6D16-TE1 and 6076A

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Track width 2600 mm and 2590 mm
      Support rollers number on either side 2 and 2
      Rolling bearings number on either side 9 and 9

      Booms/sections features 1

      Maximum cut height 9880 mm and 15230 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3200 mm 2. Width to outside of caterpillar track 3390 mm
      5. Clearance 480 mm 5. Clearance 500 mm
      7. Height to cab upper part 2930 mm 7. Height to cab upper part 3010 mm
      8. Rear platform swing radius 3100 mm 8. Rear platform swing radius 3290 mm
      15. Counterweight ground clearance 1100 mm 15. Counterweight ground clearance 1175 mm

      Carrier

      6. Track width 2600 mm 6. Track width 2590 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      13. Maximum excavation depth 8010 mm 13. Maximum excavation depth 13770 mm
      9. Maximum cut height 9880 mm 9. Maximum cut height 15230 mm
      10. Maximum loading height 6810 mm 10. Maximum loading height 13480 mm
      11. Maximum radius along ground level 9730 mm 11. Maximum radius along ground level 18250 mm