vs.

      Kato HD1023LC vs. New Holland 115SR

      26 reasons to buy Kato HD1023LC:

      Sizes

      Clearance 480 mm and 455 mm 5 % more or 25 mm
      Counterweight ground clearance 1100 mm and 910 mm 17 % more or 190 mm
      Width to outside of caterpillar track 3200 mm and 2490 mm 22 % more or 710 mm

      Operation

      Boom reach drive mechanism fluid volume 11.3 l. and 1.7 l. 85 % more or 9.6 l.
      Generator current strength 35 amperes and 30 amperes 14 % more or 5 amperes
      Fuel Capacity 320 l. and 168 l. 47 % more or 152 l.
      Cooling system fluid volume 25.5 l. and 18 l. 29 % more or 7.5 l.
      Hydraulic system fluid volume 310 l. and 140 l. 55 % more or 170 l.
      Engine oil volume 28 l. and 13 l. 54 % more or 15 l.

      Motor

      Power measured at 2200 rev / min and 2050 rev / min 7 % more or 150 rev
      Displacement 7.5 l. and 4.3 l. 43 % more or 3.2 l.
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Support rollers number on either side 2 and 1 50 % more or 1
      Rolling bearings number on either side 9 and 6 33 % more or 3

      Booms/sections features 3

      Maximum excavation depth 8010 mm and 5560 mm 31 % more or 2450 mm
      Maximum radius along ground level 11100 mm and 8050 mm 27 % more or 3050 mm
      Maximum loading height 7440 mm and 6100 mm 18 % more or 1340 mm
      Maximum vertical wall digging depth 7190 mm and 4860 mm 32 % more or 2330 mm

      Booms/sections features 2

      Maximum loading height 6990 mm and 5780 mm 17 % more or 1210 mm
      Maximum vertical wall digging depth 6250 mm and 4500 mm 28 % more or 1750 mm
      Maximum excavation depth 7010 mm and 5060 mm 28 % more or 1950 mm
      Maximum radius along ground level 10170 mm and 7590 mm 25 % more or 2580 mm

      Booms/sections features 1

      Maximum excavation depth 6520 mm and 4760 mm 27 % more or 1760 mm
      Maximum radius along ground level 9730 mm and 7290 mm 25 % more or 2440 mm
      Maximum loading height 6810 mm and 5570 mm 18 % more or 1240 mm
      Maximum vertical wall digging depth 5750 mm and 3960 mm 31 % more or 1790 mm

      5 reasons to buy New Holland 115SR:

      Swing device

      Rotation speed 11.4 rev / min and 11 rev / min 4 % more or 0.4 rev

      Operation

      Hydraulic system overflow valve pressure 35000 kPa and 32900 kPa 6 % more or 2100 kPa
      Hydraulic pump flow rate 236 l/min and 498 l/min 53 % less or 262 l/min

      Carrier

      Specific ground pressure 40 kPa and 47.1 kPa 15 % less or 7.1 kPa
      Maximum travel speed 6 km/h and 5.5 km/h 8 % more or 0.5 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 2930 mm and 2740 mm
      Rear platform swing radius 3100 mm and 1385 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 23600 kg and 12800 kg

      Motor

      Manufacturer Mitsubishi and Isuzu
      Model C 6D16-TE1 and - 4BG1TA
      Aspiration turbocharging and turbocharging

      Carrier

      Shoe dimensions 600 mm and 500 mm
      Track width 2600 mm and 1990 mm

      Booms/sections features 3

      Maximum cut height 10500 mm and 8490 mm

      Booms/sections features 2

      Maximum cut height 10060 mm and 8160 mm

      Booms/sections features 1

      Maximum cut height 9880 mm and 7960 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3200 mm 2. Width to outside of caterpillar track 2490 mm
      5. Clearance 480 mm 5. Clearance 455 mm
      7. Height to cab upper part 2930 mm 7. Height to cab upper part 2740 mm
      8. Rear platform swing radius 3100 mm 8. Rear platform swing radius 1385 mm
      15. Counterweight ground clearance 1100 mm 15. Counterweight ground clearance 910 mm

      Carrier

      6. Track width 2600 mm 6. Track width 1990 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 500 mm

      Booms/sections features 1

      12. Maximum vertical wall digging depth 5750 mm 12. Maximum vertical wall digging depth 4500 mm
      10. Maximum loading height 6990 mm 10. Maximum loading height 5780 mm
      13. Maximum excavation depth 6520 mm 13. Maximum excavation depth 5060 mm
      11. Maximum radius along ground level 10170 mm 11. Maximum radius along ground level 7590 mm
      9. Maximum cut height 10060 mm 9. Maximum cut height 8490 mm