vs.

      Kato HD1430LC vs. John Deere 120C

      21 reasons to buy Kato HD1430LC:

      Sizes

      Width to outside of caterpillar track 3200 mm and 2590 mm 19 % more or 610 mm
      Clearance 500 mm and 440 mm 12 % more or 60 mm
      Counterweight ground clearance 1130 mm and 890 mm 21 % more or 240 mm

      Operation

      Fuel Capacity 560 l. and 250 l. 55 % more or 310 l.
      Cooling system fluid volume 53.5 l. and 26.5 l. 50 % more or 27.0 l.
      Hydraulic system fluid volume 485 l. and 134 l. 72 % more or 351 l.
      Engine oil volume 49 l. and 14 l. 71 % more or 35 l.
      Boom reach drive mechanism fluid volume 11.3 l. and 2.8 l. 75 % more or 8.5 l.

      Motor

      Effective power 173 kW and 66.4 kW 62 % more or 106.6 kW
      Displacement 11.9 l. and 4.5 l. 62 % more or 7.4 l.
      Maximum torque 1010.1 Nm and 372.9 Nm 63 % more or 637.2 Nm
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Track shoes number per side 48 and 44 8 % more or 4

      Booms/sections features 2

      Maximum excavation depth 7400 mm and 5935 mm 20 % more or 1465 mm
      Maximum radius along ground level 10990 mm and 8495 mm 23 % more or 2495 mm
      Maximum loading height 7290 mm and 6615 mm 9 % more or 675 mm
      Maximum vertical wall digging depth 6530 mm and 5375 mm 18 % more or 1155 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 5700 mm and 4895 mm 14 % more or 805 mm
      Maximum excavation depth 6710 mm and 5445 mm 19 % more or 1265 mm
      Maximum radius along ground level 10390 mm and 8015 mm 23 % more or 2375 mm
      Maximum loading height 7110 mm and 6285 mm 12 % more or 825 mm

      6 reasons to buy John Deere 120C:

      Swing device

      Rotation speed 13.7 rev / min and 10 rev / min 27 % more or 3.7 rev

      Operation

      Hydraulic system overflow valve pressure 34335.9 kPa and 32819 kPa 4 % more or 1516.9 kPa
      Hydraulic pump flow rate 210 l/min and 605.7 l/min 65 % less or 395.7 l/min
      Generator current strength 45 amperes and 35 amperes 22 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Carrier

      Specific ground pressure 33.7 kPa and 57.9 kPa 42 % less or 24.2 kPa

      Neutral reasons:

      Sizes

      Height to cab upper part 3020 mm and 2740 mm
      Rear platform swing radius 3460 mm and 2130 mm
      Caterpillar track length on ground level 4070 mm and 2880 mm

      Operation

      Working weight 30900 kg and 13081.6 kg
      Operating voltage 24 V and 24 V

      Motor

      Model 6D24-TE1 and 4045H
      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow
      Manufacturer Mitsubishi and John Deere

      Carrier

      Maximum travel speed 5.5 km/h and 5.5 km/h
      Track width 2600 mm and 1990 mm
      Shoe dimensions 609.6 mm and 600 mm

      Booms/sections features 2

      Unit load-transfer height 3380 mm and 2740 mm
      Unit load-transfer length 10994.1 mm and 7620 mm
      Maximum cut height 10330 mm and 8775 mm

      Booms/sections features 1

      Unit load-transfer height 3380 mm and 2740 mm
      Unit load-transfer length 10994.1 mm and 7610 mm
      Maximum cut height 10130 mm and 8445 mm

      Images

      Sizes

      8. Rear platform swing radius 3460 mm 8. Rear platform swing radius 2130 mm
      15. Counterweight ground clearance 1130 mm 15. Counterweight ground clearance 890 mm
      2. Width to outside of caterpillar track 3200 mm 2. Width to outside of caterpillar track 2590 mm
      4. Caterpillar track length on ground level 4070 mm 4. Caterpillar track length on ground level 2880 mm
      5. Clearance 500 mm 5. Clearance 440 mm
      7. Height to cab upper part 3020 mm 7. Height to cab upper part 2740 mm

      Carrier

      6. Track width 2600 mm 6. Track width 1990 mm
      14. Shoe dimensions 609.6 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      1. Unit load-transfer length 10994.1 mm 1. Unit load-transfer length 7620 mm
      3. Unit load-transfer height 3380 mm 3. Unit load-transfer height 2740 mm
      9. Maximum cut height 10830 mm 9. Maximum cut height 8775 mm
      10. Maximum loading height 7760 mm 10. Maximum loading height 6615 mm
      11. Maximum radius along ground level 11960 mm 11. Maximum radius along ground level 8495 mm
      12. Maximum vertical wall digging depth 7650 mm 12. Maximum vertical wall digging depth 5375 mm
      13. Maximum excavation depth 8390 mm 13. Maximum excavation depth 5935 mm