- Home/
- Comparison/
- Hydraulic Shovel/
- Kato HD1880VIILC vs. Sumitomo SH220-2
Kato HD1880VIILC vs. Sumitomo SH220-2
28 reasons to buy Kato HD1880VIILC:
Sizes
Clearance | 698 mm and 460 mm | 34 % more or 238 mm |
Counterweight ground clearance | 1320 mm and 1100 mm | 17 % more or 220 mm |
Width to outside of caterpillar track | 3580 mm and 2990 mm | 16 % more or 590 mm |
Shovel
Bucket initial volume | 2 m3 and 1 m3 | 50 % more or 1 m3 |
Maximum bucket volume | 2.3 m3 and 1.4 m3 | 39 % more or 0.9 m3 |
Operation
Cooling system fluid volume | 62 l. and 27 l. | 56 % more or 35 l. |
Hydraulic system fluid volume | 650 l. and 200 l. | 69 % more or 450 l. |
Fuel Capacity | 550 l. and 310 l. | 44 % more or 240 l. |
Engine oil volume | 29 l. and 25 l. | 14 % more or 4 l. |
Boom reach drive mechanism fluid volume | 22 l. and 6 l. | 73 % more or 16 l. |
Generator current strength | 30 amperes and 25 amperes | 17 % more or 5 amperes |
Motor
Effective power | 213.3 kW and 114.1 kW | 47 % more or 99.2 kW |
Displacement | 11.1 l. and 6.5 l. | 41 % more or 4.6 l. |
Maximum torque | 1147 Nm and 539 Nm | 53 % more or 608 Nm |
Carrier
Track shoes number per side | 53 and 47 | 11 % more or 6 |
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Booms/sections features 3
Maximum excavation depth | 8260 mm and 7400 mm | 10 % more or 860 mm |
Maximum radius along ground level | 12430 mm and 10830 mm | 13 % more or 1600 mm |
Maximum loading height | 8520 mm and 6890 mm | 19 % more or 1630 mm |
Maximum vertical wall digging depth | 7270 mm and 6670 mm | 8 % more or 600 mm |
Booms/sections features 2
Maximum excavation depth | 7760 mm and 6960 mm | 10 % more or 800 mm |
Maximum vertical wall digging depth | 6800 mm and 6210 mm | 9 % more or 590 mm |
Maximum radius along ground level | 11960 mm and 10410 mm | 13 % more or 1550 mm |
Maximum loading height | 8310 mm and 6670 mm | 20 % more or 1640 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 6320 mm and 5350 mm | 15 % more or 970 mm |
Maximum excavation depth | 7270 mm and 6310 mm | 13 % more or 960 mm |
Maximum radius along ground level | 11490 mm and 9780 mm | 15 % more or 1710 mm |
Maximum loading height | 8090 mm and 6300 mm | 22 % more or 1790 mm |
7 reasons to buy Sumitomo SH220-2:
Swing device
Rotation speed | 10.4 rev / min and 8.9 rev / min | 14 % more or 1.5 rev |
Operation
Hydraulic system overflow valve pressure | 34323.3 kPa and 27923.7 kPa | 19 % more or 6399.6 kPa |
Hydraulic pump flow rate | 424 l/min and 720 l/min | 41 % less or 296 l/min |
Motor
Power measured at | 2150 rev / min and 2000 rev / min | 7 % more or 150 rev |
Torque measured at | 1700 rev / min and 1400 rev / min | 18 % more or 300 rev |
Carrier
Specific ground pressure | 50 kPa and 74.5 kPa | 33 % less or 24.5 kPa |
Maximum travel speed | 5.5 km/h and 4.7 km/h | 15 % more or 0.8 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 3285 mm and 2920 mm |
Rear platform swing radius | 3845 mm and 2990 mm |
Caterpillar track length on ground level | 4475 mm and 3460 mm |
Operation
Working weight | 44000 kg and 23000 kg |
Operating voltage | 24 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Mitsubishi and Isuzu |
Model | 6D22-TC and A-6BG1T |
Aspiration | turbocharging and turbocharging |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Track width | 2980 mm and 2390 mm |
Booms/sections features 3
Unit load-transfer height | 3470 mm and 3050 mm |
Unit load-transfer length | 12120 mm and 9960 mm |
Maximum cut height | 11890 mm and 9940 mm |
Booms/sections features 2
Unit load-transfer height | 3470 mm and 3050 mm |
Unit load-transfer length | 12120 mm and 9960 mm |
Maximum cut height | 11680 mm and 9710 mm |
Booms/sections features 1
Unit load-transfer height | 3470 mm and 3050 mm |
Unit load-transfer length | 12120 mm and 9960 mm |
Maximum cut height | 11460 mm and 9310 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3580 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 4475 mm | 4. Caterpillar track length on ground level | 3460 mm |
5. Clearance | 698 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 3285 mm | 7. Height to cab upper part | 2920 mm |
8. Rear platform swing radius | 3845 mm | 8. Rear platform swing radius | 2990 mm |
15. Counterweight ground clearance | 1320 mm | 15. Counterweight ground clearance | 1100 mm |
Carrier
6. Track width | 2980 mm | 6. Track width | 2390 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
11. Maximum radius along ground level | 11960 mm | 11. Maximum radius along ground level | 10410 mm |
12. Maximum vertical wall digging depth | 6800 mm | 12. Maximum vertical wall digging depth | 5350 mm |
13. Maximum excavation depth | 7760 mm | 13. Maximum excavation depth | 6310 mm |
1. Unit load-transfer length | 12120 mm | 1. Unit load-transfer length | 9960 mm |
3. Unit load-transfer height | 3470 mm | 3. Unit load-transfer height | 3050 mm |
9. Maximum cut height | 11890 mm | 9. Maximum cut height | 9710 mm |
10. Maximum loading height | 8520 mm | 10. Maximum loading height | 6670 mm |