vs.

      Kato HD400VII vs. Hitachi ZAXIS480MT

      6 reasons to buy Kato HD400VII:

      Swing device

      Rotation speed 12.1 rev / min and 9 rev / min 26 % more or 3.1 rev

      Operation

      Hydraulic pump flow rate 230 l/min and 360 l/min 36 % less or 130 l/min

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Torque measured at 1700 rev / min and 1500 rev / min 12 % more or 200 rev

      Carrier

      Specific ground pressure 35.3 kPa and 84 kPa 58 % less or 48.7 kPa
      Maximum travel speed 5.5 km/h and 4 km/h 27 % more or 1.5 km/h

      26 reasons to buy Hitachi ZAXIS480MT:

      Sizes

      Width to outside of caterpillar track 3520 mm and 2490 mm 29 % more or 1030 mm
      Clearance 810 mm and 440 mm 46 % more or 370 mm
      Counterweight ground clearance 1430 mm and 880 mm 38 % more or 550 mm

      Operation

      Boom reach drive mechanism fluid volume 6.5 l. and 2.2 l. 66 % more or 4.3 l.
      Hydraulic system overflow valve pressure 34335.9 kPa and 32819 kPa 4 % more or 1516.9 kPa
      Fuel Capacity 650 l. and 250 l. 62 % more or 400 l.
      Cooling system fluid volume 61 l. and 17 l. 72 % more or 44 l.
      Hydraulic system fluid volume 510 l. and 140 l. 73 % more or 370 l.
      Engine oil volume 55 l. and 12 l. 78 % more or 43 l.

      Motor

      Displacement 15.7 l. and 3.3 l. 79 % more or 12.4 l.
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1275 Nm and 298.3 Nm 77 % more or 976.7 Nm

      Carrier

      Track shoes number per side 49 and 41 16 % more or 8
      Rolling bearings number on either side 8 and 6 25 % more or 2

      Booms/sections features 3

      Maximum excavation depth 7690 mm and 5620 mm 27 % more or 2070 mm
      Maximum radius along ground level 11820 mm and 7990 mm 32 % more or 3830 mm
      Maximum loading height 7740 mm and 5780 mm 25 % more or 1960 mm
      Maximum vertical wall digging depth 6590 mm and 4570 mm 31 % more or 2020 mm

      Booms/sections features 2

      Maximum excavation depth 7220 mm and 5070 mm 30 % more or 2150 mm
      Maximum radius along ground level 11170 mm and 7570 mm 32 % more or 3600 mm
      Maximum loading height 7080 mm and 5720 mm 19 % more or 1360 mm
      Maximum vertical wall digging depth 4710 mm and 4520 mm 4 % more or 190 mm

      Booms/sections features 1

      Maximum excavation depth 5820 mm and 4770 mm 18 % more or 1050 mm
      Maximum radius along ground level 10300 mm and 7280 mm 29 % more or 3020 mm
      Maximum loading height 7300 mm and 5550 mm 24 % more or 1750 mm
      Maximum vertical wall digging depth 4620 mm and 4220 mm 9 % more or 400 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 2120 mm and 3500 mm
      Caterpillar track length on ground level 2620 mm and 4250 mm
      Height to cab upper part 2690 mm and 3460 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 10500 kg and 47300 kg

      Motor

      Manufacturer Mitsubishi and Isuzu
      Model C 4D31T and AA-6WG1TQA
      Aspiration turbocharging and turbocharging

      Carrier

      Shoe dimensions 500 mm and 600 mm
      Track width 1990 mm and 2920 mm

      Booms/sections features 3

      Maximum cut height 8080 mm and 11160 mm

      Booms/sections features 2

      Maximum cut height 8080 mm and 10340 mm

      Booms/sections features 1

      Maximum cut height 7910 mm and 10830 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2490 mm 2. Width to outside of caterpillar track 3520 mm
      4. Caterpillar track length on ground level 2620 mm 4. Caterpillar track length on ground level 4250 mm
      5. Clearance 440 mm 5. Clearance 810 mm
      7. Height to cab upper part 2690 mm 7. Height to cab upper part 3460 mm
      8. Rear platform swing radius 2120 mm 8. Rear platform swing radius 3500 mm
      15. Counterweight ground clearance 880 mm 15. Counterweight ground clearance 1430 mm

      Carrier

      6. Track width 1990 mm 6. Track width 2920 mm
      14. Shoe dimensions 500 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      9. Maximum cut height 8080 mm 9. Maximum cut height 11250 mm
      10. Maximum loading height 5780 mm 10. Maximum loading height 7860 mm
      11. Maximum radius along ground level 7990 mm 11. Maximum radius along ground level 12250 mm
      13. Maximum excavation depth 5620 mm 13. Maximum excavation depth 8190 mm
      12. Maximum vertical wall digging depth 4570 mm 12. Maximum vertical wall digging depth 6590 mm