- Home/
- Comparison/
- Hydraulic Shovel/
- Kato HD512III vs. Case CX210 Long-Range
Kato HD512III vs. Case CX210 Long-Range
6 reasons to buy Kato HD512III:
Swing device
Rotation speed | 12.5 rev / min and 11.9 rev / min | 5 % more or 0.6 rev |
Operation
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Hydraulic system overflow valve pressure | 32900 kPa and 238.2 kPa | 99 % more or 32661.8 kPa |
Motor
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Power measured at | 2050 rev / min and 1950 rev / min | 5 % more or 100 rev |
Carrier
Hook traction force | 100 kN and 183 kN | 45 % less or 83 kN |
18 reasons to buy Case CX210 Long-Range:
Sizes
Width to outside of caterpillar track | 3200 mm and 2490 mm | 22 % more or 710 mm |
Clearance | 460 mm and 440 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1040 mm and 880 mm | 15 % more or 160 mm |
Operation
Hydraulic pump flow rate | 201 l/min and 242 l/min | 17 % less or 41 l/min |
Fuel Capacity | 340.7 l. and 275 l. | 19 % more or 65.7 l. |
Cooling system fluid volume | 27 l. and 18 l. | 33 % more or 9 l. |
Hydraulic system fluid volume | 206 l. and 155 l. | 25 % more or 51 l. |
Engine oil volume | 24 l. and 17 l. | 29 % more or 7 l. |
Boom reach drive mechanism fluid volume | 4.8 l. and 2.5 l. | 48 % more or 2.3 l. |
Motor
Maximum torque | 610.1 Nm and 360 Nm | 41 % more or 250.1 Nm |
Displacement | 5.9 l. and 3.9 l. | 34 % more or 2.0 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 114.1 kW and 68 kW | 40 % more or 46.1 kW |
Carrier
Specific ground pressure | 33.8 kPa and 38 kPa | 11 % less or 4.2 kPa |
Track shoes number per side | 49 and 44 | 10 % more or 5 |
Booms/sections features 1
Maximum loading height | 10730 mm and 6010 mm | 44 % more or 4720 mm |
Maximum vertical wall digging depth | 10270 mm and 4670 mm | 55 % more or 5600 mm |
Maximum excavation depth | 12000 mm and 5220 mm | 56 % more or 6780 mm |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 2870 mm and 3660 mm |
Height to cab upper part | 2710 mm and 2960 mm |
Rear platform swing radius | 2120 mm and 2820 mm |
Operation
Working weight | 12100 kg and 21583.7 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Mitsubishi and Case |
Model | C 4D34-TLE2A and 6TAA-5904 |
Carrier
Shoe dimensions | 500 mm and 800.1 mm |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Booms/sections features 1
Maximum cut height | 8380 mm and 12970 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2490 mm | 2. Width to outside of caterpillar track | 3200 mm |
4. Caterpillar track length on ground level | 2870 mm | 4. Caterpillar track length on ground level | 3660 mm |
5. Clearance | 440 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 2710 mm | 7. Height to cab upper part | 2960 mm |
8. Rear platform swing radius | 2120 mm | 8. Rear platform swing radius | 2820 mm |
15. Counterweight ground clearance | 880 mm | 15. Counterweight ground clearance | 1040 mm |
Carrier
14. Shoe dimensions | 500 mm | 14. Shoe dimensions | 800.1 mm |
Booms/sections features 1
13. Maximum excavation depth | 6130 mm | 13. Maximum excavation depth | 12000 mm |
9. Maximum cut height | 8870 mm | 9. Maximum cut height | 12970 mm |
10. Maximum loading height | 6520 mm | 10. Maximum loading height | 10730 mm |
12. Maximum vertical wall digging depth | 5470 mm | 12. Maximum vertical wall digging depth | 10270 mm |
1. Unit load-transfer length | 7620 mm | 1. Unit load-transfer length | 12550 mm |