- Home/
- Comparison/
- Hydraulic Shovel/
- Kobelco SK290 LC vs. John Deere 120D
Kobelco SK290 LC vs. John Deere 120D
20 reasons to buy Kobelco SK290 LC:
Swing device
Swing torque | 95899.7 Nm and 33999.8 Nm | 65 % more or 61899.9 Nm |
Sizes
Width to outside of caterpillar track | 3400 mm and 2590 mm | 24 % more or 810 mm |
Clearance | 500 mm and 440 mm | 12 % more or 60 mm |
Counterweight ground clearance | 1190 mm and 890 mm | 25 % more or 300 mm |
Operation
Fuel Capacity | 420 l. and 250 l. | 40 % more or 170 l. |
Cooling system fluid volume | 28 l. and 20 l. | 29 % more or 8 l. |
Hydraulic system fluid volume | 351 l. and 132.5 l. | 62 % more or 218.5 l. |
Engine oil volume | 32 l. and 14 l. | 56 % more or 18 l. |
Motor
Effective power | 141.7 kW and 69.4 kW | 51 % more or 72.3 kW |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 7.5 l. and 4.5 l. | 40 % more or 3.0 l. |
Carrier
Maximum travel speed | 5.6 km/h and 5.5 km/h | 2 % more or 0.1 km/h |
Booms/sections features 2
Maximum loading height | 6940 mm and 6490 mm | 6 % more or 450 mm |
Maximum vertical wall digging depth | 6290 mm and 5500 mm | 13 % more or 790 mm |
Maximum excavation depth | 8120 mm and 6060 mm | 25 % more or 2060 mm |
Maximum radius along ground level | 11250 mm and 8670 mm | 23 % more or 2580 mm |
Booms/sections features 1
Maximum excavation depth | 7230 mm and 5570 mm | 23 % more or 1660 mm |
Maximum radius along ground level | 10570 mm and 8200 mm | 22 % more or 2370 mm |
Maximum loading height | 7150 mm and 6160 mm | 14 % more or 990 mm |
Maximum vertical wall digging depth | 6350 mm and 5020 mm | 21 % more or 1330 mm |
4 reasons to buy John Deere 120D:
Swing device
Rotation speed | 13.3 rev / min and 10 rev / min | 25 % more or 3.3 rev |
Operation
Hydraulic pump flow rate | 210 l/min and 505 l/min | 58 % less or 295 l/min |
Carrier
Specific ground pressure | 37 kPa and 43 kPa | 14 % less or 6 kPa |
Hook traction force | 110 kN and 257.1 kN | 57 % less or 147.1 kN |
Neutral reasons:
Sizes
Height to cab upper part | 3120 mm and 2740 mm |
Rear platform swing radius | 3070 mm and 2130 mm |
Caterpillar track length on ground level | 4010 mm and 2880 mm |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 34335.9 kPa |
Working weight | 30095.9 kg and 13826 kg |
Motor
Manufacturer | Mitsubishi and John Deere |
Model | 6D16-TLEG and 4045H, III Level III certified |
Carrier
Track width | 8600 mm and 1980 mm |
Shoe dimensions | 800 mm and 600 mm |
Booms/sections features 2
Unit load-transfer height | 4060 mm and 2740 mm |
Unit load-transfer length | 10160 mm and 7670 mm |
Maximum cut height | 10010 mm and 8900 mm |
Booms/sections features 1
Unit load-transfer height | 3220 mm and 2740 mm |
Unit load-transfer length | 10330 mm and 7660 mm |
Maximum cut height | 10060 mm and 8570 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3400 mm | 2. Width to outside of caterpillar track | 2590 mm |
15. Counterweight ground clearance | 1190 mm | 15. Counterweight ground clearance | 890 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 2880 mm |
5. Clearance | 500 mm | 5. Clearance | 440 mm |
7. Height to cab upper part | 3120 mm | 7. Height to cab upper part | 2740 mm |
8. Rear platform swing radius | 3070 mm | 8. Rear platform swing radius | 2130 mm |
Carrier
6. Track width | 8600 mm | 6. Track width | 1980 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
10. Maximum loading height | 6940 mm | 10. Maximum loading height | 6490 mm |
11. Maximum radius along ground level | 11250 mm | 11. Maximum radius along ground level | 8670 mm |
12. Maximum vertical wall digging depth | 6290 mm | 12. Maximum vertical wall digging depth | 5500 mm |
13. Maximum excavation depth | 8120 mm | 13. Maximum excavation depth | 6060 mm |
1. Unit load-transfer length | 10330 mm | 1. Unit load-transfer length | 7670 mm |
3. Unit load-transfer height | 3220 mm | 3. Unit load-transfer height | 2740 mm |
9. Maximum cut height | 10060 mm | 9. Maximum cut height | 8900 mm |