- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC1250-7 vs. Link-Belt 240X2 Long Front Part
Komatsu PC1250-7 vs. Link-Belt 240X2 Long Front Part
12 reasons to buy Komatsu PC1250-7:
Sizes
Width to outside of caterpillar track | 4600 mm and 3390 mm | 26 % more or 1210 mm |
Clearance | 990 mm and 460 mm | 54 % more or 530 mm |
Counterweight ground clearance | 1790 mm and 1100 mm | 39 % more or 690 mm |
Operation
Fuel Capacity | 1360 l. and 410 l. | 70 % more or 950 l. |
Cooling system fluid volume | 140 l. and 25.2 l. | 82 % more or 114.8 l. |
Hydraulic system fluid volume | 670 l. and 250 l. | 63 % more or 420 l. |
Engine oil volume | 56 l. and 23.1 l. | 59 % more or 32.9 l. |
Boom reach drive mechanism fluid volume | 24 l. and 9.7 l. | 60 % more or 14.3 l. |
Hydraulic system overflow valve pressure | 34323.2 kPa and 34266.9 kPa | 0 % more or 56.3 kPa |
Motor
Displacement | 23.2 l. and 5.2 l. | 78 % more or 18.0 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
11 reasons to buy Link-Belt 240X2 Long Front Part:
Swing device
Rotation speed | 10.7 rev / min and 5.5 rev / min | 49 % more or 5.2 rev |
Operation
Hydraulic pump flow rate | 467.9 l/min and 988 l/min | 53 % less or 520.1 l/min |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Track shoes number per side | 51 and 48 | 6 % more or 3 |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 42.1 kPa and 137.3 kPa | 69 % less or 95.2 kPa |
Maximum travel speed | 5.5 km/h and 3.2 km/h | 42 % more or 2.3 km/h |
Booms/sections features 1
Maximum excavation depth | 14560 mm and 9350 mm | 36 % more or 5210 mm |
Maximum radius along ground level | 18220 mm and 15000 mm | 18 % more or 3220 mm |
Maximum loading height | 11780 mm and 8680 mm | 26 % more or 3100 mm |
Maximum vertical wall digging depth | 12130 mm and 7610 mm | 37 % more or 4520 mm |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 4995 mm and 3840 mm |
Height to cab upper part | 3925 mm and 3000 mm |
Rear platform swing radius | 4870 mm and 2940 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 106700 kg and 27999.8 kg |
Generator current strength | 50 amperes and 50 amperes |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Komatsu and Isuzu |
Model | SAA6D170E-3 and AH-4HK1X |
Carrier
Track width | 3900 mm and 2590 mm |
Shoe dimensions | 700 mm and 800 mm |
Booms/sections features 1
Unit load-transfer height | 6040 mm and 3130 mm |
Unit load-transfer length | 16020 mm and 14380 mm |
Maximum cut height | 13400 mm and 13950 mm |
Images
Sizes
15. Counterweight ground clearance | 1790 mm | 15. Counterweight ground clearance | 1100 mm |
2. Width to outside of caterpillar track | 4600 mm | 2. Width to outside of caterpillar track | 3390 mm |
4. Caterpillar track length on ground level | 4995 mm | 4. Caterpillar track length on ground level | 3840 mm |
5. Clearance | 990 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 3925 mm | 7. Height to cab upper part | 3000 mm |
8. Rear platform swing radius | 4870 mm | 8. Rear platform swing radius | 2940 mm |
Carrier
6. Track width | 3900 mm | 6. Track width | 2590 mm |
14. Shoe dimensions | 700 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
9. Maximum cut height | 13490 mm | 9. Maximum cut height | 13950 mm |
10. Maximum loading height | 9000 mm | 10. Maximum loading height | 11780 mm |
11. Maximum radius along ground level | 16000 mm | 11. Maximum radius along ground level | 18220 mm |
12. Maximum vertical wall digging depth | 8490 mm | 12. Maximum vertical wall digging depth | 12130 mm |
13. Maximum excavation depth | 10440 mm | 13. Maximum excavation depth | 14560 mm |
1. Unit load-transfer length | 15840 mm | 1. Unit load-transfer length | 14380 mm |
3. Unit load-transfer height | 6990 mm | 3. Unit load-transfer height | 3130 mm |