- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC180LC-6 vs. Link-Belt 290X2 Long Front Part
Komatsu PC180LC-6 vs. Link-Belt 290X2 Long Front Part
5 reasons to buy Komatsu PC180LC-6:
Swing device
Rotation speed | 12 rev / min and 10.2 rev / min | 15 % more or 1.8 rev |
Operation
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Hydraulic pump flow rate | 276 l/min and 486 l/min | 43 % less or 210 l/min |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Specific ground pressure | 41.4 kPa and 43 kPa | 4 % less or 1.6 kPa |
17 reasons to buy Link-Belt 290X2 Long Front Part:
Sizes
Clearance | 470 mm and 442 mm | 6 % more or 28 mm |
Counterweight ground clearance | 1190 mm and 1030 mm | 13 % more or 160 mm |
Width to outside of caterpillar track | 3400 mm and 2780 mm | 18 % more or 620 mm |
Operation
Boom reach drive mechanism fluid volume | 6 l. and 4 l. | 33 % more or 2 l. |
Cooling system fluid volume | 29 l. and 20 l. | 31 % more or 9 l. |
Hydraulic system fluid volume | 300 l. and 120 l. | 60 % more or 180 l. |
Engine oil volume | 38 l. and 16 l. | 58 % more or 22 l. |
Fuel Capacity | 450 l. and 250 l. | 44 % more or 200 l. |
Motor
Effective power | 154.4 kW and 80 kW | 48 % more or 74.4 kW |
Displacement | 7.8 l. and 3.9 l. | 50 % more or 3.9 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Maximum travel speed | 5.6 km/h and 5.5 km/h | 2 % more or 0.1 km/h |
Track shoes number per side | 50 and 45 | 10 % more or 5 |
Booms/sections features 1
Maximum excavation depth | 14120 mm and 5200 mm | 63 % more or 8920 mm |
Maximum radius along ground level | 18360 mm and 8180 mm | 55 % more or 10180 mm |
Maximum loading height | 12750 mm and 6130 mm | 52 % more or 6620 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2871 mm and 3170 mm |
Rear platform swing radius | 2417 mm and 3150 mm |
Caterpillar track length on ground level | 3260 mm and 3980 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 17900 kg and 29801 kg |
Motor
Aspiration | turbocharging and Turbocharging with intercooler |
Manufacturer | Komatsu and Isuzu |
Model | SA4D102E and AH-6HK1XYSS |
Carrier
Shoe dimensions | 600 mm and 800 mm |
Support rollers number on either side | 2 and 2 |
Track width | 2180 mm and 2600 mm |
Booms/sections features 1
Unit load-transfer height | 3125 mm and 3380 mm |
Unit load-transfer length | 8520 mm and 15110 mm |
Maximum cut height | 8775 mm and 14860 mm |
Images
Sizes
15. Counterweight ground clearance | 1030 mm | 15. Counterweight ground clearance | 1190 mm |
7. Height to cab upper part | 2871 mm | 7. Height to cab upper part | 3170 mm |
8. Rear platform swing radius | 2417 mm | 8. Rear platform swing radius | 3150 mm |
2. Width to outside of caterpillar track | 2780 mm | 2. Width to outside of caterpillar track | 3400 mm |
4. Caterpillar track length on ground level | 3260 mm | 4. Caterpillar track length on ground level | 3980 mm |
5. Clearance | 442 mm | 5. Clearance | 470 mm |
Carrier
6. Track width | 2180 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
13. Maximum excavation depth | 5645 mm | 13. Maximum excavation depth | 14120 mm |
1. Unit load-transfer length | 8520 mm | 1. Unit load-transfer length | 15110 mm |
3. Unit load-transfer height | 3125 mm | 3. Unit load-transfer height | 3380 mm |
9. Maximum cut height | 8775 mm | 9. Maximum cut height | 14860 mm |
10. Maximum loading height | 6130 mm | 10. Maximum loading height | 12750 mm |
11. Maximum radius along ground level | 8180 mm | 11. Maximum radius along ground level | 18360 mm |