vs.

      Komatsu PC200EL-6 vs. Case CX210

      5 reasons to buy Komatsu PC200EL-6:

      Swing device

      Rotation speed 12 rev / min and 11.9 rev / min 1 % more or 0.1 rev

      Shovel

      Maximum bucket volume 1.2 m3 and 1.1 m3 8 % more or 0.1 m3

      Operation

      Engine oil volume 26.3 l. and 24 l. 9 % more or 2.3 l.

      Motor

      Power measured at 2200 rev / min and 1950 rev / min 11 % more or 250 rev

      Carrier

      Hook traction force 147.1 kN and 183 kN 20 % less or 35.9 kN

      22 reasons to buy Case CX210:

      Sizes

      Width to outside of caterpillar track 3200 mm and 2780 mm 13 % more or 420 mm
      Clearance 457 mm and 442 mm 3 % more or 15 mm
      Counterweight ground clearance 1040 mm and 1030 mm 1 % more or 10 mm

      Operation

      Cooling system fluid volume 27 l. and 22.2 l. 18 % more or 4.8 l.
      Hydraulic pump flow rate 201 l/min and 307 l/min 35 % less or 106 l/min
      Hydraulic system fluid volume 206 l. and 120 l. 42 % more or 86 l.
      Boom reach drive mechanism fluid volume 4.8 l. and 4 l. 17 % more or 0.8 l.
      Fuel Capacity 340 l. and 250 l. 26 % more or 90 l.

      Motor

      Effective power 109.6 kW and 95.4 kW 13 % more or 14.2 kW
      Full power 114.1 kW and 100.7 kW 12 % more or 13.4 kW

      Carrier

      Track shoes number per side 49 and 45 8 % more or 4
      Rolling bearings number on either side 8 and 7 12 % more or 1
      Specific ground pressure 31 kPa and 45.1 kPa 31 % less or 14.1 kPa
      Maximum travel speed 5.5 km/h and 5 km/h 9 % more or 0.5 km/h

      Booms/sections features 2

      Maximum excavation depth 6120 mm and 5610 mm 8 % more or 510 mm
      Maximum radius along ground level 9220 mm and 5036 mm 45 % more or 4184 mm
      Maximum loading height 6580 mm and 6230 mm 5 % more or 350 mm
      Maximum vertical wall digging depth 5490 mm and 5036 mm 8 % more or 454 mm

      Booms/sections features 1

      Maximum loading height 6830 mm and 6130 mm 10 % more or 700 mm
      Maximum vertical wall digging depth 6080 mm and 4506 mm 26 % more or 1574 mm
      Maximum excavation depth 6710 mm and 5200 mm 23 % more or 1510 mm
      Maximum radius along ground level 9780 mm and 8180 mm 16 % more or 1600 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2871 mm and 2880 mm
      Rear platform swing radius 2656 mm and 2820 mm
      Caterpillar track length on ground level 3260 mm and 3660 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 45 amperes and 45 amperes
      Working weight 19300 kg and 19959 kg

      Motor

      Displacement 5.9 l. and 5.9 l.
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging
      Manufacturer Komatsu and Case
      Model S6D102E and 6TAA-5904

      Carrier

      Shoe dimensions 600 mm and 800.1 mm
      Support rollers number on either side 2 and 2

      Booms/sections features 2

      Unit load-transfer height 2960 mm and 3070 mm
      Unit load-transfer length 8800 mm and 9550 mm
      Maximum cut height 8840 mm and 9370 mm

      Booms/sections features 1

      Maximum cut height 8775 mm and 9650 mm
      Unit load-transfer height 3125 mm and 2960 mm
      Unit load-transfer length 8860 mm and 9470 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2780 mm 2. Width to outside of caterpillar track 3200 mm
      4. Caterpillar track length on ground level 3260 mm 4. Caterpillar track length on ground level 3660 mm
      5. Clearance 442 mm 5. Clearance 457 mm
      7. Height to cab upper part 2871 mm 7. Height to cab upper part 2880 mm
      8. Rear platform swing radius 2656 mm 8. Rear platform swing radius 2820 mm
      15. Counterweight ground clearance 1030 mm 15. Counterweight ground clearance 1040 mm

      Carrier

      14. Shoe dimensions 600 mm 14. Shoe dimensions 800.1 mm

      Booms/sections features 1

      13. Maximum excavation depth 5610 mm 13. Maximum excavation depth 6120 mm
      9. Maximum cut height 9055 mm 9. Maximum cut height 9650 mm
      1. Unit load-transfer length 8800 mm 1. Unit load-transfer length 9470 mm
      10. Maximum loading height 6470 mm 10. Maximum loading height 6830 mm
      3. Unit load-transfer height 2965 mm 3. Unit load-transfer height 2960 mm
      11. Maximum radius along ground level 9075 mm 11. Maximum radius along ground level 9780 mm
      12. Maximum vertical wall digging depth 5036 mm 12. Maximum vertical wall digging depth 6080 mm