vs.

      Komatsu PC210NLC-7SLF vs. John Deere 160D LC

      16 reasons to buy Komatsu PC210NLC-7SLF:

      Sizes

      Counterweight ground clearance 1100 mm and 1001 mm 9 % more or 99 mm

      Operation

      Fuel Capacity 325 l. and 320 l. 2 % more or 5 l.
      Cooling system fluid volume 30.9 l. and 22 l. 29 % more or 8.9 l.
      Engine oil volume 24 l. and 15 l. 37 % more or 9 l.
      Boom reach drive mechanism fluid volume 6.6 l. and 5.7 l. 14 % more or 0.9 l.
      Hydraulic system overflow valve pressure 37265.2 kPa and 34335.9 kPa 8 % more or 2929.3 kPa

      Motor

      Effective power 106.6 kW and 90.2 kW 15 % more or 16.4 kW
      Cylinders number 6 and 4 33 % more or 2
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.

      Carrier

      Track shoes number per side 49 and 43 12 % more or 6
      Rolling bearings number on either side 9 and 7 22 % more or 2
      Maximum travel speed 5.5 km/h and 5.3 km/h 4 % more or 0.2 km/h

      Booms/sections features 1

      Maximum excavation depth 11510 mm and 5980 mm 48 % more or 5530 mm
      Maximum loading height 11680 mm and 6170 mm 47 % more or 5510 mm
      Maximum radius along ground level 15190 mm and 8700 mm 43 % more or 6490 mm
      Maximum vertical wall digging depth 8770 mm and 5160 mm 41 % more or 3610 mm

      9 reasons to buy John Deere 160D LC:

      Swing device

      Rotation speed 13.3 rev / min and 12.4 rev / min 7 % more or 0.9 rev

      Sizes

      Clearance 470 mm and 440 mm 6 % more or 30 mm
      Width to outside of caterpillar track 2600 mm and 2540 mm 2 % more or 60 mm

      Operation

      Hydraulic system fluid volume 196.8 l. and 143 l. 27 % more or 53.8 l.
      Generator current strength 80 amperes and 60 amperes 25 % more or 20 amperes
      Hydraulic pump flow rate 382 l/min and 428 l/min 11 % less or 46 l/min

      Motor

      Power measured at 2200 rev / min and 1950 rev / min 11 % more or 250 rev

      Carrier

      Specific ground pressure 42.5 kPa and 56.9 kPa 25 % less or 14.4 kPa
      Hook traction force 169.2 kN and 178.5 kN 5 % less or 9.3 kN

      Neutral reasons:

      Sizes

      Rear platform swing radius 2800 mm and 2490 mm
      Caterpillar track length on ground level 3640 mm and 3100 mm
      Height to cab upper part 3015 mm and 2950 mm

      Operation

      Working weight 23255 kg and 17920.5 kg
      Operating voltage 24 V and 24 V

      Motor

      Model SAA6D102E-2 and 4045H
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharger with charge air cooler by oncoming air flow
      Manufacturer Komatsu and John Deere

      Carrier

      Support rollers number on either side 2 and 2
      Shoe dimensions 500 mm and 600 mm
      Track width 2040 mm and 2600 mm

      Booms/sections features 1

      Maximum cut height 13880 mm and 8880 mm
      Unit load-transfer height 3390 mm and 2870 mm
      Unit load-transfer length 12435 mm and 8550 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2540 mm 2. Width to outside of caterpillar track 2600 mm
      4. Caterpillar track length on ground level 3640 mm 4. Caterpillar track length on ground level 3100 mm
      5. Clearance 440 mm 5. Clearance 470 mm
      7. Height to cab upper part 3015 mm 7. Height to cab upper part 2950 mm
      8. Rear platform swing radius 2800 mm 8. Rear platform swing radius 2490 mm
      15. Counterweight ground clearance 1100 mm 15. Counterweight ground clearance 1001 mm

      Carrier

      6. Track width 2040 mm 6. Track width 2600 mm
      14. Shoe dimensions 500 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      10. Maximum loading height 11680 mm 10. Maximum loading height 6170 mm
      11. Maximum radius along ground level 15190 mm 11. Maximum radius along ground level 8700 mm
      12. Maximum vertical wall digging depth 8770 mm 12. Maximum vertical wall digging depth 5160 mm
      13. Maximum excavation depth 11510 mm 13. Maximum excavation depth 5980 mm
      1. Unit load-transfer length 12435 mm 1. Unit load-transfer length 8580 mm
      3. Unit load-transfer height 3390 mm 3. Unit load-transfer height 3110 mm
      9. Maximum cut height 13880 mm 9. Maximum cut height 9130 mm