- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC240LC-6 vs. John Deere 160D LC
Komatsu PC240LC-6 vs. John Deere 160D LC
14 reasons to buy Komatsu PC240LC-6:
Sizes
Width to outside of caterpillar track | 3180 mm and 2600 mm | 18 % more or 580 mm |
Counterweight ground clearance | 1070 mm and 1001 mm | 6 % more or 69 mm |
Operation
Hydraulic system overflow valve pressure | 34813.6 kPa and 34335.9 kPa | 1 % more or 477.7 kPa |
Fuel Capacity | 340 l. and 320 l. | 6 % more or 20 l. |
Cooling system fluid volume | 22.2 l. and 22 l. | 1 % more or 0.2 l. |
Engine oil volume | 24 l. and 15 l. | 37 % more or 9 l. |
Motor
Effective power | 117.8 kW and 90.2 kW | 23 % more or 27.6 kW |
Displacement | 5.9 l. and 4.5 l. | 24 % more or 1.4 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Track shoes number per side | 51 and 43 | 16 % more or 8 |
Rolling bearings number on either side | 10 and 7 | 30 % more or 3 |
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Booms/sections features 2
Maximum radius along ground level | 9470 mm and 9160 mm | 3 % more or 310 mm |
Booms/sections features 1
Maximum radius along ground level | 9090 mm and 8700 mm | 4 % more or 390 mm |
15 reasons to buy John Deere 160D LC:
Swing device
Rotation speed | 13.3 rev / min and 12.4 rev / min | 7 % more or 0.9 rev |
Sizes
Clearance | 470 mm and 440 mm | 6 % more or 30 mm |
Operation
Hydraulic pump flow rate | 382 l/min and 432 l/min | 12 % less or 50 l/min |
Boom reach drive mechanism fluid volume | 5.7 l. and 5.5 l. | 4 % more or 0.2 l. |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Hydraulic system fluid volume | 196.8 l. and 166 l. | 16 % more or 30.8 l. |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Carrier
Specific ground pressure | 42.5 kPa and 46.9 kPa | 9 % less or 4.4 kPa |
Hook traction force | 169.2 kN and 173.6 kN | 3 % less or 4.4 kN |
Booms/sections features 2
Maximum excavation depth | 6490 mm and 6370 mm | 2 % more or 120 mm |
Maximum loading height | 6400 mm and 6215 mm | 3 % more or 185 mm |
Maximum vertical wall digging depth | 5690 mm and 5145 mm | 10 % more or 545 mm |
Booms/sections features 1
Maximum excavation depth | 5980 mm and 5880 mm | 2 % more or 100 mm |
Maximum loading height | 6170 mm and 6120 mm | 1 % more or 50 mm |
Maximum vertical wall digging depth | 5160 mm and 4800 mm | 7 % more or 360 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2860 mm and 2490 mm |
Caterpillar track length on ground level | 3830 mm and 3100 mm |
Height to cab upper part | 2905 mm and 2950 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 24210 kg and 17920.5 kg |
Motor
Model | SA6D102E and 4045H |
Manufacturer | Komatsu and John Deere |
Aspiration | turbocharging and Turbocharger with charge air cooler by oncoming air flow |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Track width | 2580 mm and 2600 mm |
Booms/sections features 2
Unit load-transfer length | 9830 mm and 8580 mm |
Maximum cut height | 9150 mm and 9130 mm |
Unit load-transfer height | 3255 mm and 3110 mm |
Booms/sections features 1
Unit load-transfer height | 3005 mm and 2870 mm |
Unit load-transfer length | 9735 mm and 8550 mm |
Maximum cut height | 9070 mm and 8880 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3180 mm | 2. Width to outside of caterpillar track | 2600 mm |
4. Caterpillar track length on ground level | 3830 mm | 4. Caterpillar track length on ground level | 3100 mm |
5. Clearance | 440 mm | 5. Clearance | 470 mm |
7. Height to cab upper part | 2905 mm | 7. Height to cab upper part | 2950 mm |
8. Rear platform swing radius | 2860 mm | 8. Rear platform swing radius | 2490 mm |
15. Counterweight ground clearance | 1070 mm | 15. Counterweight ground clearance | 1001 mm |
Carrier
6. Track width | 2580 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
3. Unit load-transfer height | 3396 mm | 3. Unit load-transfer height | 3110 mm |
11. Maximum radius along ground level | 9502 mm | 11. Maximum radius along ground level | 9160 mm |
9. Maximum cut height | 9850 mm | 9. Maximum cut height | 9130 mm |
13. Maximum excavation depth | 6064 mm | 13. Maximum excavation depth | 6490 mm |
10. Maximum loading height | 6926 mm | 10. Maximum loading height | 6400 mm |
12. Maximum vertical wall digging depth | 6010 mm | 12. Maximum vertical wall digging depth | 5690 mm |
1. Unit load-transfer length | 9735 mm | 1. Unit load-transfer length | 8580 mm |