vs.

      Komatsu PC240NLC-6 vs. Hidromek HMK300LC

      5 reasons to buy Komatsu PC240NLC-6:

      Swing device

      Rotation speed 12.4 rev / min and 11.4 rev / min 8 % more or 1.0 rev

      Operation

      Generator current strength 60 amperes and 50 amperes 17 % more or 10 amperes
      Hydraulic pump flow rate 432 l/min and 520 l/min 17 % less or 88 l/min

      Carrier

      Maximum travel speed 5.5 km/h and 4.9 km/h 11 % more or 0.6 km/h
      Hook traction force 173.6 kN and 253.5 kN 32 % less or 79.9 kN

      16 reasons to buy Hidromek HMK300LC:

      Sizes

      Width to outside of caterpillar track 3200 mm and 2980 mm 7 % more or 220 mm
      Clearance 495 mm and 440 mm 11 % more or 55 mm
      Counterweight ground clearance 1170 mm and 1070 mm 9 % more or 100 mm

      Operation

      Fuel Capacity 483 l. and 340 l. 30 % more or 143 l.
      Hydraulic system fluid volume 370 l. and 166 l. 55 % more or 204 l.
      Engine oil volume 28 l. and 24 l. 14 % more or 4 l.
      Boom reach drive mechanism fluid volume 6 l. and 5.5 l. 8 % more or 0.5 l.
      Hydraulic system overflow valve pressure 35303.9 kPa and 34813.6 kPa 1 % more or 490.3 kPa

      Motor

      Full power 161.1 kW and 123.8 kW 23 % more or 37.3 kW
      Power measured at 2150 rev / min and 2100 rev / min 2 % more or 50 rev
      Displacement 7.5 l. and 5.9 l. 21 % more or 1.6 l.

      Carrier

      Track shoes number per side 51 and 49 4 % more or 2

      Booms/sections features 1

      Maximum excavation depth 6780 mm and 5880 mm 13 % more or 900 mm
      Maximum radius along ground level 10160 mm and 9090 mm 11 % more or 1070 mm
      Maximum loading height 7030 mm and 6120 mm 13 % more or 910 mm
      Maximum vertical wall digging depth 5930 mm and 4800 mm 19 % more or 1130 mm

      Neutral reasons:

      Sizes

      Caterpillar track length on ground level 3640 mm and 4030 mm
      Height to cab upper part 2905 mm and 3120 mm
      Rear platform swing radius 2850 mm and 3220 mm

      Operation

      Working weight 23900 kg and 30500 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and Turbocharging with intercooler
      Manufacturer Komatsu and Mitsubishi
      Cylinders number 6 and 6
      Model SA6D102E and 6D16-TLU2J

      Carrier

      Rolling bearings number on either side 9 and 9
      Track width 2380 mm and 2600 mm
      Shoe dimensions 600 mm and 600 mm
      Support rollers number on either side 2 and 2

      Booms/sections features 1

      Unit load-transfer height 3005 mm and 3540 mm
      Unit load-transfer length 9735 mm and 10780 mm
      Maximum cut height 9070 mm and 10080 mm

      Images

      Sizes

      15. Counterweight ground clearance 1070 mm 15. Counterweight ground clearance 1170 mm
      2. Width to outside of caterpillar track 2980 mm 2. Width to outside of caterpillar track 3200 mm
      4. Caterpillar track length on ground level 3640 mm 4. Caterpillar track length on ground level 4030 mm
      5. Clearance 440 mm 5. Clearance 495 mm
      7. Height to cab upper part 2905 mm 7. Height to cab upper part 3120 mm
      8. Rear platform swing radius 2850 mm 8. Rear platform swing radius 3220 mm

      Carrier

      6. Track width 2380 mm 6. Track width 2600 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      13. Maximum excavation depth 6064 mm 13. Maximum excavation depth 6780 mm
      1. Unit load-transfer length 9717 mm 1. Unit load-transfer length 10780 mm
      3. Unit load-transfer height 3396 mm 3. Unit load-transfer height 3540 mm
      9. Maximum cut height 9850 mm 9. Maximum cut height 10080 mm
      10. Maximum loading height 6926 mm 10. Maximum loading height 7030 mm
      11. Maximum radius along ground level 10036 mm 11. Maximum radius along ground level 10160 mm
      12. Maximum vertical wall digging depth 6010 mm 12. Maximum vertical wall digging depth 5930 mm