- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC240NLC-7 vs. Liebherr R995
Komatsu PC240NLC-7 vs. Liebherr R995
6 reasons to buy Komatsu PC240NLC-7:
Swing device
Rotation speed | 11.7 rev / min and 3.7 rev / min | 68 % more or 8.0 rev |
Operation
Hydraulic system overflow valve pressure | 37265.2 kPa and 34997.8 kPa | 6 % more or 2267.4 kPa |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Rolling bearings number on either side | 10 and 7 | 30 % more or 3 |
Specific ground pressure | 51.7 kPa and 245.2 kPa | 79 % less or 193.5 kPa |
Maximum travel speed | 5.5 km/h and 2.7 km/h | 51 % more or 2.8 km/h |
17 reasons to buy Liebherr R995:
Sizes
Width to outside of caterpillar track | 6960 mm and 2980 mm | 57 % more or 3980 mm |
Clearance | 1145 mm and 440 mm | 62 % more or 705 mm |
Counterweight ground clearance | 2600 mm and 1100 mm | 58 % more or 1500 mm |
Shovel
Bucket initial volume | 26.5 m3 and 1.1 m3 | 96 % more or 25.4 m3 |
Operation
Hydraulic pump flow rate | 361 l/min and 440 l/min | 18 % less or 79 l/min |
Fuel Capacity | 10000 l. and 400 l. | 96 % more or 9600 l. |
Hydraulic system fluid volume | 3030 l. and 143 l. | 95 % more or 2887 l. |
Generator current strength | 240 amperes and 60 amperes | 75 % more or 180 amperes |
Motor
Displacement | 65 l. and 5.9 l. | 91 % more or 59.1 l. |
Cylinders number | 16 and 6 | 62 % more or 10 |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 2
Maximum excavation depth | 9000 mm and 6320 mm | 30 % more or 2680 mm |
Maximum radius along ground level | 18250 mm and 9670 mm | 47 % more or 8580 mm |
Maximum loading height | 10700 mm and 6860 mm | 36 % more or 3840 mm |
Booms/sections features 1
Maximum excavation depth | 8600 mm and 5825 mm | 32 % more or 2775 mm |
Maximum radius along ground level | 17800 mm and 9070 mm | 49 % more or 8730 mm |
Maximum loading height | 10500 mm and 6715 mm | 36 % more or 3785 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3015 mm and 8820 mm |
Rear platform swing radius | 2940 mm and 6590 mm |
Caterpillar track length on ground level | 3655 mm and 6700 mm |
Operation
Working weight | 23380 kg and 445500 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Komatsu and MTU/DDC |
Carrier
Shoe dimensions | 600 mm and 1200 mm |
Track width | 2380 mm and 5600 mm |
Booms/sections features 2
Unit load-transfer length | 9960 mm and 20100 mm |
Maximum cut height | 9790 mm and 16500 mm |
Unit load-transfer height | 3295 mm and 9000 mm |
Booms/sections features 1
Unit load-transfer height | 3220 mm and 9100 mm |
Unit load-transfer length | 9865 mm and 19600 mm |
Maximum cut height | 9665 mm and 16300 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2980 mm | 2. Width to outside of caterpillar track | 6960 mm |
4. Caterpillar track length on ground level | 3655 mm | 4. Caterpillar track length on ground level | 6700 mm |
5. Clearance | 440 mm | 5. Clearance | 1145 mm |
7. Height to cab upper part | 3015 mm | 7. Height to cab upper part | 8820 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 6590 mm |
15. Counterweight ground clearance | 1100 mm | 15. Counterweight ground clearance | 2600 mm |
Carrier
6. Track width | 2380 mm | 6. Track width | 5600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 1200 mm |
Booms/sections features 1
11. Maximum radius along ground level | 9070 mm | 11. Maximum radius along ground level | 18250 mm |
3. Unit load-transfer height | 3220 mm | 3. Unit load-transfer height | 9100 mm |
13. Maximum excavation depth | 5825 mm | 13. Maximum excavation depth | 9000 mm |
9. Maximum cut height | 9665 mm | 9. Maximum cut height | 16300 mm |
1. Unit load-transfer length | 9960 mm | 1. Unit load-transfer length | 19600 mm |
10. Maximum loading height | 6715 mm | 10. Maximum loading height | 10500 mm |