vs.

      Komatsu PC340LC-7SLF vs. Case CX700

      12 reasons to buy Komatsu PC340LC-7SLF:

      Swing device

      Rotation speed 9.5 rev / min and 6.5 rev / min 32 % more or 3.0 rev

      Operation

      Generator current strength 60 amperes and 50 amperes 17 % more or 10 amperes
      Hydraulic system overflow valve pressure 37265.2 kPa and 31398.7 kPa 16 % more or 5866.5 kPa

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev

      Carrier

      Specific ground pressure 65.7 kPa and 73.8 kPa 11 % less or 8.1 kPa
      Maximum travel speed 5.5 km/h and 4.1 km/h 25 % more or 1.4 km/h
      Hook traction force 263.8 kN and 469 kN 44 % less or 205.2 kN
      Track shoes number per side 48 and 47 2 % more or 1

      Booms/sections features 1

      Maximum excavation depth 17485 mm and 9850 mm 44 % more or 7635 mm
      Maximum radius along ground level 20450 mm and 14300 mm 30 % more or 6150 mm
      Maximum loading height 13480 mm and 8710 mm 35 % more or 4770 mm
      Maximum vertical wall digging depth 14275 mm and 8630 mm 40 % more or 5645 mm

      12 reasons to buy Case CX700:

      Sizes

      Width to outside of caterpillar track 3640 mm and 3290 mm 10 % more or 350 mm
      Clearance 830 mm and 498 mm 40 % more or 332 mm
      Counterweight ground clearance 1510 mm and 1180 mm 22 % more or 330 mm

      Operation

      Fuel Capacity 900 l. and 605 l. 33 % more or 295 l.
      Cooling system fluid volume 112 l. and 32 l. 71 % more or 80 l.
      Hydraulic system fluid volume 650 l. and 188 l. 71 % more or 462 l.
      Engine oil volume 52 l. and 35 l. 33 % more or 17 l.
      Boom reach drive mechanism fluid volume 27 l. and 13.4 l. 50 % more or 13.6 l.
      Hydraulic pump flow rate 400 l/min and 536 l/min 25 % less or 136 l/min

      Motor

      Effective power 317 kW and 180 kW 43 % more or 137 kW
      Displacement 15.7 l. and 8.3 l. 47 % more or 7.4 l.

      Carrier

      Support rollers number on either side 3 and 2 33 % more or 1

      Neutral reasons:

      Sizes

      Height to cab upper part 3130 mm and 3790 mm
      Rear platform swing radius 3825 mm and 4000 mm
      Caterpillar track length on ground level 4030 mm and 4700 mm

      Operation

      Working weight 41100 kg and 69500 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Model SAA6D114E-2 and AH-6WG1X, III Level III certified
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging

      Carrier

      Track width 2590 mm and 3250 mm
      Shoe dimensions 700 mm and 900 mm
      Rolling bearings number on either side 8 and 8

      Booms/sections features 1

      Unit load-transfer length 17220 mm and 13170 mm
      Maximum cut height 16260 mm and 12700 mm
      Unit load-transfer height 3405 mm and 5160 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3290 mm 2. Width to outside of caterpillar track 3640 mm
      4. Caterpillar track length on ground level 4030 mm 4. Caterpillar track length on ground level 4700 mm
      15. Counterweight ground clearance 1180 mm 15. Counterweight ground clearance 1510 mm
      5. Clearance 498 mm 5. Clearance 830 mm
      7. Height to cab upper part 3130 mm 7. Height to cab upper part 3790 mm
      8. Rear platform swing radius 3825 mm 8. Rear platform swing radius 4000 mm

      Carrier

      6. Track width 2590 mm 6. Track width 3250 mm
      14. Shoe dimensions 700 mm 14. Shoe dimensions 900 mm

      Booms/sections features 1

      1. Unit load-transfer length 17220 mm 1. Unit load-transfer length 13300 mm
      3. Unit load-transfer height 3405 mm 3. Unit load-transfer height 4470 mm
      9. Maximum cut height 16260 mm 9. Maximum cut height 12040 mm
      10. Maximum loading height 13480 mm 10. Maximum loading height 8160 mm
      11. Maximum radius along ground level 20450 mm 11. Maximum radius along ground level 13400 mm
      12. Maximum vertical wall digging depth 14275 mm 12. Maximum vertical wall digging depth 7360 mm
      13. Maximum excavation depth 17485 mm 13. Maximum excavation depth 8970 mm