- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC750SE-6 vs. Tata Hitachi EX350 LCH
Komatsu PC750SE-6 vs. Tata Hitachi EX350 LCH
16 reasons to buy Komatsu PC750SE-6:
Sizes
| Clearance | 840 mm and 500 mm | 40 % more or 340 mm |
| Counterweight ground clearance | 1555 mm and 1160 mm | 25 % more or 395 mm |
| Width to outside of caterpillar track | 4110 mm and 3190 mm | 22 % more or 920 mm |
Shovel
| Maximum bucket volume | 4.5 m3 and 1.9 m3 | 58 % more or 2.6 m3 |
| Bucket initial volume | 4 m3 and 1.5 m3 | 62 % more or 2.5 m3 |
Operation
| Fuel Capacity | 880 l. and 560 l. | 36 % more or 320 l. |
| Cooling system fluid volume | 85 l. and 39 l. | 54 % more or 46 l. |
| Hydraulic system fluid volume | 440 l. and 320 l. | 27 % more or 120 l. |
| Engine oil volume | 38 l. and 35 l. | 8 % more or 3 l. |
| Boom reach drive mechanism fluid volume | 30 l. and 17 l. | 43 % more or 13 l. |
Motor
| Displacement | 15.2 l. and 9.8 l. | 36 % more or 5.4 l. |
Carrier
| Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 1
| Maximum excavation depth | 7015 mm and 6606 mm | 6 % more or 409 mm |
| Maximum radius along ground level | 11865 mm and 10050 mm | 15 % more or 1815 mm |
| Maximum loading height | 7565 mm and 6650 mm | 12 % more or 915 mm |
| Maximum vertical wall digging depth | 4930 mm and 4755 mm | 4 % more or 175 mm |
9 reasons to buy Tata Hitachi EX350 LCH:
Swing device
| Rotation speed | 11.3 rev / min and 5.7 rev / min | 50 % more or 5.6 rev |
Shovel
| Bucket minimum volume | 1.3 m3 and 4 m3 | 67 % less or 2.7 m3 |
Operation
| Hydraulic system overflow valve pressure | 34323.4 kPa and 31381.3 kPa | 9 % more or 2942.1 kPa |
| Hydraulic pump flow rate | 520 l/min and 1008 l/min | 48 % less or 488 l/min |
Motor
| Power measured at | 1900 rev / min and 1800 rev / min | 5 % more or 100 rev |
Carrier
| Track shoes number per side | 48 and 47 | 2 % more or 1 |
| Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
| Specific ground pressure | 62.7 kPa and 116.5 kPa | 46 % less or 53.8 kPa |
| Maximum travel speed | 5.5 km/h and 4.2 km/h | 24 % more or 1.3 km/h |
Neutral reasons:
Sizes
| Rear platform swing radius | 4300 mm and 3300 mm |
| Caterpillar track length on ground level | 4500 mm and 4050 mm |
| Height to cab upper part | 3515 mm and 3130 mm |
Operation
| Working weight | 76245 kg and 34000 kg |
Motor
| Model | SAA6D140E-2 and B-65D1T |
| Cylinders number | 6 and 6 |
| Aspiration | turbocharging and turbocharging |
| Manufacturer | Komatsu and Isuzu |
Carrier
| Shoe dimensions | 610 mm and 600 mm |
| Track width | 3500 mm and 2590 mm |
Booms/sections features 1
| Maximum cut height | 11510 mm and 9614 mm |
Images
Sizes
| 2. Width to outside of caterpillar track | 4110 mm | 2. Width to outside of caterpillar track | 3190 mm |
| 4. Caterpillar track length on ground level | 4500 mm | 4. Caterpillar track length on ground level | 4050 mm |
| 5. Clearance | 840 mm | 5. Clearance | 500 mm |
| 7. Height to cab upper part | 3515 mm | 7. Height to cab upper part | 3130 mm |
| 8. Rear platform swing radius | 4300 mm | 8. Rear platform swing radius | 3300 mm |
| 15. Counterweight ground clearance | 1555 mm | 15. Counterweight ground clearance | 1160 mm |
Carrier
| 6. Track width | 3500 mm | 6. Track width | 2590 mm |
| 14. Shoe dimensions | 610 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
| 9. Maximum cut height | 11510 mm | 9. Maximum cut height | 10230 mm |
| 10. Maximum loading height | 7565 mm | 10. Maximum loading height | 7130 mm |
| 11. Maximum radius along ground level | 11865 mm | 11. Maximum radius along ground level | 10900 mm |
| 12. Maximum vertical wall digging depth | 4930 mm | 12. Maximum vertical wall digging depth | 6480 mm |
| 13. Maximum excavation depth | 7015 mm | 13. Maximum excavation depth | 7380 mm |