vs.

      Liebherr R904C vs. Liebherr R914C

      9 reasons to buy Liebherr R904C:

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Displacement 6.6 l. and 6.4 l. 3 % more or 0.2 l.

      Carrier

      Hook traction force 234 kN and 260 kN 10 % less or 26 kN

      Booms/sections features 5

      Maximum excavation depth 7900 mm and 5650 mm 28 % more or 2250 mm
      Maximum radius along ground level 11150 mm and 9800 mm 12 % more or 1350 mm
      Maximum loading height 7950 mm and 7550 mm 5 % more or 400 mm

      Booms/sections features 4

      Maximum loading height 7300 mm and 6950 mm 5 % more or 350 mm

      Booms/sections features 3

      Maximum loading height 6950 mm and 6650 mm 4 % more or 300 mm

      Booms/sections features 2

      Maximum loading height 6650 mm and 6450 mm 3 % more or 200 mm

      21 reasons to buy Liebherr R914C:

      Swing device

      Swing torque 66 Nm and 46 Nm 30 % more or 20 Nm

      Sizes

      Clearance 475 mm and 470 mm 1 % more or 5 mm

      Operation

      Fuel Capacity 380 l. and 340 l. 11 % more or 40 l.
      Hydraulic system fluid volume 500 l. and 330 l. 34 % more or 170 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Hydraulic pump flow rate 214 l/min and 330 l/min 35 % less or 116 l/min

      Motor

      Full power 115 kW and 99 kW 14 % more or 16 kW

      Carrier

      Support rollers number on either side 8 and 7 12 % more or 1
      Maximum travel speed 5.3 km/h and 5.2 km/h 2 % more or 0.1 km/h

      Booms/sections features 6

      Maximum excavation depth 5950 mm and 5400 mm 9 % more or 550 mm
      Maximum radius along ground level 10100 mm and 8350 mm 17 % more or 1750 mm
      Maximum loading height 7800 mm and 6050 mm 22 % more or 1750 mm

      Booms/sections features 4

      Maximum excavation depth 7500 mm and 6900 mm 8 % more or 600 mm
      Maximum radius along ground level 10600 mm and 10150 mm 4 % more or 450 mm

      Booms/sections features 3

      Maximum excavation depth 6800 mm and 6400 mm 6 % more or 400 mm
      Maximum radius along ground level 9950 mm and 9650 mm 3 % more or 300 mm

      Booms/sections features 2

      Maximum excavation depth 6500 mm and 5900 mm 9 % more or 600 mm
      Maximum radius along ground level 9650 mm and 9200 mm 5 % more or 450 mm

      Booms/sections features 1

      Maximum excavation depth 6200 mm and 5400 mm 13 % more or 800 mm
      Maximum radius along ground level 9400 mm and 8650 mm 8 % more or 750 mm
      Maximum loading height 6350 mm and 6150 mm 3 % more or 200 mm

      Neutral reasons:

      Swing device

      Rotation speed 9 rev / min and 9 rev / min

      Sizes

      Width to outside of caterpillar track 2505 mm and 2505 mm
      Rear platform swing radius 2470 mm and 2790 mm
      Caterpillar track length on ground level 3368 mm and 3432 mm

      Operation

      Working weight 20198.5 kg and 23700.2 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Liebherr and Liebherr
      Model D 924 Tl-E and D 934 S
      Aspiration Direct injection with turbocharging and charge air cooling, a reduced amount of emissions and turbocharging and subsequent cooling, reduced amount of emissions
      Cylinders number 4 and 4

      Carrier

      Shoe dimensions 500 mm and 500 mm
      Rolling bearings number on either side 2 and 2

      Booms/sections features 6

      Unit load-transfer length 8850 mm and 9900 mm
      Maximum cut height 9050 mm and 10950 mm
      Unit load-transfer height 3080 mm and 3090 mm

      Booms/sections features 5

      Unit load-transfer height 3080 mm and 3090 mm
      Unit load-transfer length 9000 mm and 9900 mm
      Maximum cut height 11000 mm and 10750 mm

      Booms/sections features 4

      Unit load-transfer height 3080 mm and 3100 mm
      Unit load-transfer length 9000 mm and 9950 mm
      Maximum cut height 10350 mm and 10050 mm

      Booms/sections features 3

      Maximum cut height 10000 mm and 9700 mm
      Unit load-transfer height 3080 mm and 3090 mm
      Unit load-transfer length 9000 mm and 9500 mm

      Booms/sections features 2

      Maximum cut height 9650 mm and 9500 mm
      Unit load-transfer height 3080 mm and 3090 mm
      Unit load-transfer length 9000 mm and 9500 mm

      Booms/sections features 1

      Unit load-transfer height 3080 mm and 3090 mm
      Unit load-transfer length 9100 mm and 9500 mm
      Maximum cut height 9150 mm and 9400 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2505 mm 2. Width to outside of caterpillar track 2505 mm
      4. Caterpillar track length on ground level 3368 mm 4. Caterpillar track length on ground level 3432 mm
      5. Clearance 470 mm 5. Clearance 475 mm
      8. Rear platform swing radius 2470 mm 8. Rear platform swing radius 2790 mm

      Carrier

      14. Shoe dimensions 500 mm 14. Shoe dimensions 500 mm

      Booms/sections features 1

      3. Unit load-transfer height 3080 mm 3. Unit load-transfer height 3100 mm
      1. Unit load-transfer length 9000 mm 1. Unit load-transfer length 9900 mm
      9. Maximum cut height 11000 mm 9. Maximum cut height 10050 mm
      10. Maximum loading height 7950 mm 10. Maximum loading height 6950 mm
      11. Maximum radius along ground level 11150 mm 11. Maximum radius along ground level 10600 mm
      13. Maximum excavation depth 7900 mm 13. Maximum excavation depth 7500 mm