- Home/
- Comparison/
- Hydraulic Shovel/
- Link-Belt 130X2LC vs. Hitachi EX210LCH-5
Link-Belt 130X2LC vs. Hitachi EX210LCH-5
6 reasons to buy Link-Belt 130X2LC:
Swing device
Rotation speed | 14 rev / min and 13.9 rev / min | 1 % more or 0.1 rev |
Operation
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Hydraulic pump flow rate | 258.2 l/min and 370 l/min | 30 % less or 111.8 l/min |
Motor
Power measured at | 2000 rev / min and 1950 rev / min | 2 % more or 50 rev |
Carrier
Maximum travel speed | 5.6 km/h and 5.5 km/h | 2 % more or 0.1 km/h |
Specific ground pressure | 32 kPa and 42.1 kPa | 24 % less or 10.1 kPa |
19 reasons to buy Hitachi EX210LCH-5:
Sizes
Width to outside of caterpillar track | 2990 mm and 2590 mm | 13 % more or 400 mm |
Clearance | 450 mm and 440 mm | 2 % more or 10 mm |
Counterweight ground clearance | 1030 mm and 895 mm | 13 % more or 135 mm |
Operation
Boom reach drive mechanism fluid volume | 8.2 l. and 2.2 l. | 73 % more or 6.0 l. |
Fuel Capacity | 310 l. and 260 l. | 16 % more or 50 l. |
Hydraulic system overflow valve pressure | 34335.9 kPa and 34266.9 kPa | 0 % more or 69.0 kPa |
Cooling system fluid volume | 23 l. and 14.6 l. | 37 % more or 8.4 l. |
Hydraulic system fluid volume | 200 l. and 157 l. | 21 % more or 43 l. |
Engine oil volume | 25 l. and 17 l. | 32 % more or 8 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 98.4 kW and 70.8 kW | 28 % more or 27.6 kW |
Displacement | 6.5 l. and 3 l. | 54 % more or 3.5 l. |
Maximum torque | 461 Nm and 359.3 Nm | 22 % more or 101.7 Nm |
Carrier
Track shoes number per side | 49 and 46 | 6 % more or 3 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Booms/sections features 1
Maximum excavation depth | 6670 mm and 5540 mm | 17 % more or 1130 mm |
Maximum radius along ground level | 9750 mm and 8170 mm | 16 % more or 1580 mm |
Maximum loading height | 6780 mm and 6390 mm | 6 % more or 390 mm |
Maximum vertical wall digging depth | 6050 mm and 4950 mm | 18 % more or 1100 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2130 mm and 2750 mm |
Caterpillar track length on ground level | 3040 mm and 3660 mm |
Height to cab upper part | 2880 mm and 2870 mm |
Operation
Working weight | 12900.2 kg and 20320.9 kg |
Motor
Manufacturer | Isuzu and Isuzu |
Model | AJ-4JJ1X and A-6BG1T |
Torque measured at | 1600 rev / min and 1600 rev / min |
Aspiration | turbocharging and turbocharging |
Carrier
Track width | 1990 mm and 2200 mm |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 1
Unit load-transfer height | 2880 mm and 2970 mm |
Unit load-transfer length | 7620 mm and 9500 mm |
Maximum cut height | 8770 mm and 9600 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2590 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 3040 mm | 4. Caterpillar track length on ground level | 3660 mm |
5. Clearance | 440 mm | 5. Clearance | 450 mm |
7. Height to cab upper part | 2880 mm | 7. Height to cab upper part | 2870 mm |
8. Rear platform swing radius | 2130 mm | 8. Rear platform swing radius | 2750 mm |
15. Counterweight ground clearance | 895 mm | 15. Counterweight ground clearance | 1030 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 2200 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 7640 mm | 1. Unit load-transfer length | 9500 mm |
3. Unit load-transfer height | 2880 mm | 3. Unit load-transfer height | 2970 mm |
9. Maximum cut height | 9050 mm | 9. Maximum cut height | 9600 mm |
10. Maximum loading height | 6680 mm | 10. Maximum loading height | 6780 mm |
11. Maximum radius along ground level | 8640 mm | 11. Maximum radius along ground level | 9750 mm |
12. Maximum vertical wall digging depth | 5350 mm | 12. Maximum vertical wall digging depth | 6050 mm |
13. Maximum excavation depth | 6050 mm | 13. Maximum excavation depth | 6670 mm |