- Home/
- Comparison/
- Hydraulic Shovel/
- Link-Belt 135 Spin Ace vs. Sumitomo SH100-2
Link-Belt 135 Spin Ace vs. Sumitomo SH100-2
16 reasons to buy Link-Belt 135 Spin Ace:
Sizes
Width to outside of caterpillar track | 2590 mm and 2490 mm | 4 % more or 100 mm |
Operation
Hydraulic system fluid volume | 125 l. and 120 l. | 4 % more or 5 l. |
Generator current strength | 50 amperes and 25 amperes | 50 % more or 25 amperes |
Motor
Effective power | 65.6 kW and 60 kW | 9 % more or 5.6 kW |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Maximum torque | 321.3 Nm and 294 Nm | 8 % more or 27.3 Nm |
Carrier
Track shoes number per side | 43 and 42 | 2 % more or 1 |
Specific ground pressure | 36 kPa and 39.2 kPa | 8 % less or 3.2 kPa |
Booms/sections features 2
Maximum loading height | 7130 mm and 6310 mm | 12 % more or 820 mm |
Maximum vertical wall digging depth | 5080 mm and 4510 mm | 11 % more or 570 mm |
Maximum excavation depth | 5930 mm and 5080 mm | 14 % more or 850 mm |
Maximum radius along ground level | 8430 mm and 7820 mm | 7 % more or 610 mm |
Booms/sections features 1
Maximum radius along ground level | 8070 mm and 7550 mm | 6 % more or 520 mm |
Maximum loading height | 6910 mm and 6090 mm | 12 % more or 820 mm |
Maximum vertical wall digging depth | 4850 mm and 4220 mm | 13 % more or 630 mm |
Maximum excavation depth | 5470 mm and 4790 mm | 12 % more or 680 mm |
7 reasons to buy Sumitomo SH100-2:
Swing device
Rotation speed | 13.6 rev / min and 10 rev / min | 26 % more or 3.6 rev |
Sizes
Clearance | 440 mm and 435 mm | 1 % more or 5 mm |
Operation
Hydraulic pump flow rate | 222 l/min and 233.9 l/min | 5 % less or 11.9 l/min |
Fuel Capacity | 240 l. and 165 l. | 31 % more or 75 l. |
Cooling system fluid volume | 19 l. and 17.7 l. | 7 % more or 1.3 l. |
Engine oil volume | 15.5 l. and 15 l. | 3 % more or 0.5 l. |
Carrier
Maximum travel speed | 5.5 km/h and 5 km/h | 9 % more or 0.5 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 2750 mm and 2695 mm |
Rear platform swing radius | 1480 mm and 2050 mm |
Caterpillar track length on ground level | 2790 mm and 2610 mm |
Operation
Working weight | 13199.5 kg and 11480 kg |
Operating voltage | 24 V and 24 V |
Motor
Model | BB-4BG1T and A-4BG1T |
Displacement | 4.3 l. and 4.3 l. |
Torque measured at | 1600 rev / min and 1600 rev / min |
Aspiration | natural aspiration and turbocharging |
Cylinders number | 4 and 4 |
Manufacturer | Isuzu and Isuzu |
Carrier
Shoe dimensions | 600 mm and 500 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 6 and 6 |
Track width | 1990 mm and 1990 mm |
Booms/sections features 2
Unit load-transfer height | 2750 mm and 2695 mm |
Unit load-transfer length | 7230 mm and 7260 mm |
Maximum cut height | 9520 mm and 8700 mm |
Booms/sections features 1
Maximum cut height | 9310 mm and 8480 mm |
Unit load-transfer height | 2750 mm and 2695 mm |
Unit load-transfer length | 7240 mm and 7260 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2590 mm | 2. Width to outside of caterpillar track | 2490 mm |
4. Caterpillar track length on ground level | 2790 mm | 4. Caterpillar track length on ground level | 2610 mm |
5. Clearance | 435 mm | 5. Clearance | 440 mm |
7. Height to cab upper part | 2750 mm | 7. Height to cab upper part | 2695 mm |
8. Rear platform swing radius | 1480 mm | 8. Rear platform swing radius | 2050 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 1990 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 500 mm |
Booms/sections features 1
13. Maximum excavation depth | 5930 mm | 13. Maximum excavation depth | 4790 mm |
9. Maximum cut height | 9520 mm | 9. Maximum cut height | 8700 mm |
1. Unit load-transfer length | 7240 mm | 1. Unit load-transfer length | 7260 mm |
10. Maximum loading height | 7130 mm | 10. Maximum loading height | 6310 mm |
3. Unit load-transfer height | 2750 mm | 3. Unit load-transfer height | 2695 mm |
11. Maximum radius along ground level | 8430 mm | 11. Maximum radius along ground level | 7820 mm |
12. Maximum vertical wall digging depth | 5080 mm | 12. Maximum vertical wall digging depth | 4510 mm |