- Home/
- Comparison/
- Hydraulic Shovel/
- Link-Belt 160X2 vs. Hitachi ZX670LCR-3
Link-Belt 160X2 vs. Hitachi ZX670LCR-3
6 reasons to buy Link-Belt 160X2:
Swing device
Rotation speed | 11.5 rev / min and 9.5 rev / min | 17 % more or 2.0 rev |
Operation
Hydraulic pump flow rate | 283.9 l/min and 912 l/min | 69 % less or 628.1 l/min |
Motor
Power measured at | 2200 rev / min and 1800 rev / min | 18 % more or 400 rev |
Torque measured at | 1800 rev / min and 1500 rev / min | 17 % more or 300 rev |
Carrier
Specific ground pressure | 40 kPa and 103 kPa | 61 % less or 63 kPa |
Maximum travel speed | 5.5 km/h and 4.9 km/h | 11 % more or 0.6 km/h |
24 reasons to buy Hitachi ZX670LCR-3:
Sizes
Width to outside of caterpillar track | 3950 mm and 2580 mm | 35 % more or 1370 mm |
Clearance | 860 mm and 440 mm | 49 % more or 420 mm |
Counterweight ground clearance | 1530 mm and 1020 mm | 33 % more or 510 mm |
Operation
Hydraulic system overflow valve pressure | 34300 kPa and 34266.9 kPa | 0 % more or 33.1 kPa |
Cooling system fluid volume | 57 l. and 15 l. | 74 % more or 42 l. |
Hydraulic system fluid volume | 680 l. and 165 l. | 76 % more or 515 l. |
Engine oil volume | 57 l. and 17 l. | 70 % more or 40 l. |
Boom reach drive mechanism fluid volume | 10.5 l. and 5 l. | 52 % more or 5.5 l. |
Fuel Capacity | 900 l. and 300 l. | 67 % more or 600 l. |
Motor
Effective power | 345 kW and 89.5 kW | 74 % more or 255.5 kW |
Displacement | 15.7 l. and 3 l. | 81 % more or 12.7 l. |
Maximum torque | 1980 Nm and 390.5 Nm | 80 % more or 1589.5 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Track shoes number per side | 47 and 44 | 6 % more or 3 |
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Booms/sections features 2
Maximum excavation depth | 8560 mm and 6490 mm | 24 % more or 2070 mm |
Maximum radius along ground level | 13030 mm and 9220 mm | 29 % more or 3810 mm |
Maximum loading height | 8020 mm and 6690 mm | 17 % more or 1330 mm |
Maximum vertical wall digging depth | 7720 mm and 5220 mm | 32 % more or 2500 mm |
Booms/sections features 1
Maximum excavation depth | 7120 mm and 6060 mm | 15 % more or 1060 mm |
Maximum radius along ground level | 11500 mm and 8870 mm | 23 % more or 2630 mm |
Maximum loading height | 7330 mm and 6610 mm | 10 % more or 720 mm |
Maximum vertical wall digging depth | 5280 mm and 5080 mm | 4 % more or 200 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2410 mm and 3850 mm |
Caterpillar track length on ground level | 3190 mm and 4590 mm |
Height to cab upper part | 3020 mm and 3590 mm |
Operation
Working weight | 17100.4 kg and 68400 kg |
Motor
Manufacturer | Isuzu and Isuzu |
Model | AI-4JJ1X and AH-6WG1XYSA-02 |
Aspiration | turbocharging and turbocharging |
Carrier
Track width | 1990 mm and 3300 mm |
Shoe dimensions | 600 mm and 650 mm |
Booms/sections features 2
Unit load-transfer height | 3130 mm and 4460 mm |
Unit load-transfer length | 8520 mm and 13200 mm |
Maximum cut height | 9290 mm and 11940 mm |
Booms/sections features 1
Maximum cut height | 9240 mm and 11190 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2580 mm | 2. Width to outside of caterpillar track | 3950 mm |
4. Caterpillar track length on ground level | 3190 mm | 4. Caterpillar track length on ground level | 4590 mm |
5. Clearance | 440 mm | 5. Clearance | 860 mm |
7. Height to cab upper part | 3020 mm | 7. Height to cab upper part | 3590 mm |
8. Rear platform swing radius | 2410 mm | 8. Rear platform swing radius | 3850 mm |
15. Counterweight ground clearance | 1020 mm | 15. Counterweight ground clearance | 1530 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 3300 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 650 mm |
Booms/sections features 1
9. Maximum cut height | 9240 mm | 9. Maximum cut height | 11940 mm |
10. Maximum loading height | 6610 mm | 10. Maximum loading height | 8020 mm |
11. Maximum radius along ground level | 8870 mm | 11. Maximum radius along ground level | 13030 mm |
12. Maximum vertical wall digging depth | 5080 mm | 12. Maximum vertical wall digging depth | 7720 mm |
13. Maximum excavation depth | 6060 mm | 13. Maximum excavation depth | 8560 mm |
1. Unit load-transfer length | 8520 mm | 1. Unit load-transfer length | 13200 mm |
3. Unit load-transfer height | 3130 mm | 3. Unit load-transfer height | 4460 mm |