- Home/
- Comparison/
- Hydraulic Shovel/
- Link-Belt 210LX Long Front Part vs. Case CX460
Link-Belt 210LX Long Front Part vs. Case CX460
10 reasons to buy Link-Belt 210LX Long Front Part:
Swing device
Rotation speed | 11.9 rev / min and 9 rev / min | 24 % more or 2.9 rev |
Operation
Hydraulic system overflow valve pressure | 34266.9 kPa and 31398.7 kPa | 8 % more or 2868.2 kPa |
Hydraulic pump flow rate | 402 l/min and 720 l/min | 44 % less or 318 l/min |
Motor
Torque measured at | 1600 rev / min and 1500 rev / min | 6 % more or 100 rev |
Carrier
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Specific ground pressure | 34 kPa and 53.8 kPa | 37 % less or 19.8 kPa |
Booms/sections features 1
Maximum loading height | 10730 mm and 7940 mm | 26 % more or 2790 mm |
Maximum vertical wall digging depth | 10270 mm and 7160 mm | 30 % more or 3110 mm |
Maximum excavation depth | 12000 mm and 8340 mm | 30 % more or 3660 mm |
Maximum radius along ground level | 15490 mm and 12330 mm | 20 % more or 3160 mm |
14 reasons to buy Case CX460:
Sizes
Width to outside of caterpillar track | 3650 mm and 3190 mm | 13 % more or 460 mm |
Clearance | 540 mm and 460 mm | 15 % more or 80 mm |
Counterweight ground clearance | 1330 mm and 1040 mm | 22 % more or 290 mm |
Operation
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Fuel Capacity | 610 l. and 340 l. | 44 % more or 270 l. |
Cooling system fluid volume | 38 l. and 27 l. | 29 % more or 11 l. |
Hydraulic system fluid volume | 460 l. and 206 l. | 55 % more or 254 l. |
Engine oil volume | 36 l. and 24 l. | 33 % more or 12 l. |
Boom reach drive mechanism fluid volume | 10.5 l. and 4.5 l. | 57 % more or 6.0 l. |
Motor
Displacement | 9.8 l. and 6.5 l. | 34 % more or 3.3 l. |
Effective power | 270 kW and 102.9 kW | 62 % more or 167.1 kW |
Maximum torque | 1434.5 Nm and 531.5 Nm | 63 % more or 903.0 Nm |
Carrier
Track shoes number per side | 50 and 49 | 2 % more or 1 |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Neutral reasons:
Sizes
Rear platform swing radius | 2720 mm and 3620 mm |
Caterpillar track length on ground level | 3660 mm and 4400 mm |
Height to cab upper part | 2880 mm and 3270 mm |
Operation
Working weight | 21591 kg and 46708 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Isuzu and Isuzu |
Power measured at | 1950 rev / min and 1950 rev / min |
Model | BB-6BG1T and AH-6UZ1XYSS, III Level III certified |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging |
Carrier
Track width | 2390 mm and 2750 mm |
Shoe dimensions | 800 mm and 900 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 1
Maximum cut height | 12970 mm and 11340 mm |
Unit load-transfer height | 3000 mm and 3600 mm |
Unit load-transfer length | 12470 mm and 11920 mm |
Images
Sizes
15. Counterweight ground clearance | 1040 mm | 15. Counterweight ground clearance | 1330 mm |
4. Caterpillar track length on ground level | 3660 mm | 4. Caterpillar track length on ground level | 4400 mm |
5. Clearance | 460 mm | 5. Clearance | 540 mm |
7. Height to cab upper part | 2880 mm | 7. Height to cab upper part | 3270 mm |
8. Rear platform swing radius | 2720 mm | 8. Rear platform swing radius | 3620 mm |
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 3650 mm |
Carrier
6. Track width | 2390 mm | 6. Track width | 2750 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 900 mm |
Booms/sections features 1
13. Maximum excavation depth | 12000 mm | 13. Maximum excavation depth | 6870 mm |
1. Unit load-transfer length | 12470 mm | 1. Unit load-transfer length | 11920 mm |
3. Unit load-transfer height | 3000 mm | 3. Unit load-transfer height | 3600 mm |
9. Maximum cut height | 12970 mm | 9. Maximum cut height | 11340 mm |
10. Maximum loading height | 10730 mm | 10. Maximum loading height | 7940 mm |
11. Maximum radius along ground level | 15490 mm | 11. Maximum radius along ground level | 12330 mm |
12. Maximum vertical wall digging depth | 10270 mm | 12. Maximum vertical wall digging depth | 7160 mm |