- Home/
- Comparison/
- Hydraulic Shovel/
- Link-Belt 210LX vs. John Deere 160D LC
Link-Belt 210LX vs. John Deere 160D LC
20 reasons to buy Link-Belt 210LX:
Swing device
Swing torque | 60794.9 Nm and 43864.8 Nm | 28 % more or 16930.1 Nm |
Sizes
Width to outside of caterpillar track | 3190 mm and 2600 mm | 18 % more or 590 mm |
Counterweight ground clearance | 1040 mm and 1001 mm | 4 % more or 39 mm |
Operation
Fuel Capacity | 340 l. and 320 l. | 6 % more or 20 l. |
Cooling system fluid volume | 27 l. and 22 l. | 19 % more or 5 l. |
Hydraulic system fluid volume | 206 l. and 196.8 l. | 4 % more or 9.2 l. |
Engine oil volume | 24 l. and 15 l. | 37 % more or 9 l. |
Motor
Effective power | 102.9 kW and 90.2 kW | 12 % more or 12.7 kW |
Displacement | 6.5 l. and 4.5 l. | 31 % more or 2.0 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Specific ground pressure | 32 kPa and 42.5 kPa | 25 % less or 10.5 kPa |
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Track shoes number per side | 49 and 43 | 12 % more or 6 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Booms/sections features 2
Maximum radius along ground level | 9230 mm and 9160 mm | 1 % more or 70 mm |
Maximum loading height | 6570 mm and 6400 mm | 3 % more or 170 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 6080 mm and 5160 mm | 15 % more or 920 mm |
Maximum excavation depth | 6710 mm and 5980 mm | 11 % more or 730 mm |
Maximum radius along ground level | 9790 mm and 8700 mm | 11 % more or 1090 mm |
Maximum loading height | 6840 mm and 6170 mm | 10 % more or 670 mm |
9 reasons to buy John Deere 160D LC:
Swing device
Rotation speed | 13.3 rev / min and 11.9 rev / min | 11 % more or 1.4 rev |
Sizes
Clearance | 470 mm and 460 mm | 2 % more or 10 mm |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 34266.9 kPa | 0 % more or 69.0 kPa |
Hydraulic pump flow rate | 382 l/min and 402 l/min | 5 % less or 20 l/min |
Boom reach drive mechanism fluid volume | 5.7 l. and 4.5 l. | 21 % more or 1.2 l. |
Generator current strength | 80 amperes and 40 amperes | 50 % more or 40 amperes |
Motor
Power measured at | 2200 rev / min and 1950 rev / min | 11 % more or 250 rev |
Booms/sections features 2
Maximum excavation depth | 6490 mm and 6110 mm | 6 % more or 380 mm |
Maximum vertical wall digging depth | 5690 mm and 5480 mm | 4 % more or 210 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2880 mm and 2950 mm |
Rear platform swing radius | 2720 mm and 2490 mm |
Caterpillar track length on ground level | 3660 mm and 3100 mm |
Operation
Working weight | 20320.9 kg and 17920.5 kg |
Operating voltage | 24 V and 24 V |
Motor
Model | BB-6BG1T and 4045H |
Aspiration | turbocharging and Turbocharger with charge air cooler by oncoming air flow |
Manufacturer | Isuzu and John Deere |
Carrier
Track width | 2390 mm and 2600 mm |
Shoe dimensions | 800 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Unit load-transfer height | 3070 mm and 3110 mm |
Unit load-transfer length | 9470 mm and 8580 mm |
Maximum cut height | 9380 mm and 9130 mm |
Booms/sections features 1
Unit load-transfer height | 2910 mm and 2870 mm |
Unit load-transfer length | 9390 mm and 8550 mm |
Maximum cut height | 9650 mm and 8880 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 2600 mm |
4. Caterpillar track length on ground level | 3660 mm | 4. Caterpillar track length on ground level | 3100 mm |
5. Clearance | 460 mm | 5. Clearance | 470 mm |
7. Height to cab upper part | 2880 mm | 7. Height to cab upper part | 2950 mm |
8. Rear platform swing radius | 2720 mm | 8. Rear platform swing radius | 2490 mm |
15. Counterweight ground clearance | 1040 mm | 15. Counterweight ground clearance | 1001 mm |
Carrier
6. Track width | 2390 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 9470 mm | 1. Unit load-transfer length | 8580 mm |
3. Unit load-transfer height | 3070 mm | 3. Unit load-transfer height | 3110 mm |
9. Maximum cut height | 9380 mm | 9. Maximum cut height | 9130 mm |
10. Maximum loading height | 6570 mm | 10. Maximum loading height | 6400 mm |
11. Maximum radius along ground level | 9230 mm | 11. Maximum radius along ground level | 9160 mm |
12. Maximum vertical wall digging depth | 5480 mm | 12. Maximum vertical wall digging depth | 5690 mm |
13. Maximum excavation depth | 6110 mm | 13. Maximum excavation depth | 6490 mm |