vs.

      Link-Belt 700LX vs. Terex TXC420LC-1

      21 reasons to buy Link-Belt 700LX:

      Sizes

      Width to outside of caterpillar track 4150 mm and 3350 mm 19 % more or 800 mm
      Clearance 825 mm and 540 mm 35 % more or 285 mm
      Counterweight ground clearance 1510 mm and 1277 mm 15 % more or 233 mm

      Shovel

      Bucket initial volume 2.2 m3 and 1.9 m3 14 % more or 0.3 m3
      Maximum bucket volume 3.7 m3 and 2.2 m3 41 % more or 1.5 m3

      Operation

      Fuel Capacity 900 l. and 550 l. 39 % more or 350 l.
      Cooling system fluid volume 112 l. and 56 l. 50 % more or 56 l.
      Hydraulic system fluid volume 650 l. and 410 l. 37 % more or 240 l.
      Engine oil volume 52 l. and 28 l. 46 % more or 24 l.
      Hydraulic system overflow valve pressure 34322.1 kPa and 31371.1 kPa 9 % more or 2951.0 kPa

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Maximum torque 1979.5 Nm and 1156.5 Nm 42 % more or 823.0 Nm
      Effective power 316.9 kW and 209.5 kW 34 % more or 107.4 kW
      Displacement 15.7 l. and 11.1 l. 29 % more or 4.6 l.

      Carrier

      Support rollers number on either side 3 and 2 33 % more or 1

      Booms/sections features 2

      Maximum vertical wall digging depth 6870 mm and 5065 mm 26 % more or 1805 mm
      Maximum radius along ground level 12900 mm and 12070 mm 6 % more or 830 mm

      Booms/sections features 1

      Maximum loading height 8330 mm and 7845 mm 6 % more or 485 mm
      Maximum vertical wall digging depth 6850 mm and 4400 mm 36 % more or 2450 mm
      Maximum excavation depth 7870 mm and 7725 mm 2 % more or 145 mm
      Maximum radius along ground level 12600 mm and 11310 mm 10 % more or 1290 mm

      10 reasons to buy Terex TXC420LC-1:

      Swing device

      Rotation speed 9.5 rev / min and 6.5 rev / min 32 % more or 3.0 rev

      Shovel

      Bucket minimum volume 1.4 m3 and 1.6 m3 12 % less or 0.2 m3

      Operation

      Hydraulic pump flow rate 630 l/min and 879.7 l/min 28 % less or 249.7 l/min

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Carrier

      Rolling bearings number on either side 9 and 8 11 % more or 1
      Track shoes number per side 50 and 47 6 % more or 3
      Specific ground pressure 71.7 kPa and 73.8 kPa 3 % less or 2.1 kPa
      Maximum travel speed 5.5 km/h and 4 km/h 27 % more or 1.5 km/h

      Booms/sections features 2

      Maximum loading height 8330 mm and 8020 mm 4 % more or 310 mm
      Maximum excavation depth 8470 mm and 8400 mm 1 % more or 70 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 3970 mm and 3660 mm
      Caterpillar track length on ground level 4700 mm and 4250 mm

      Operation

      Working weight 69535.7 kg and 41199.8 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with intercooler and turbocharging, with subsequent cooling of charging air by oncoming air flow
      Cylinders number 6 and 6
      Manufacturer Isuzu and Daewoo
      Model AH-6WG1X-S and DE12TIS

      Carrier

      Shoe dimensions 900 mm and 600 mm
      Track width 3250 mm and 2750 mm

      Booms/sections features 2

      Maximum cut height 11920 mm and 11495 mm

      Booms/sections features 1

      Maximum cut height 12400 mm and 11000 mm
      Unit load-transfer height 4370 mm and 3575 mm
      Unit load-transfer length 13250 mm and 11690 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 4150 mm 2. Width to outside of caterpillar track 3350 mm
      4. Caterpillar track length on ground level 4700 mm 4. Caterpillar track length on ground level 4250 mm
      5. Clearance 825 mm 5. Clearance 540 mm
      8. Rear platform swing radius 3970 mm 8. Rear platform swing radius 3660 mm
      15. Counterweight ground clearance 1510 mm 15. Counterweight ground clearance 1277 mm

      Carrier

      6. Track width 3250 mm 6. Track width 2750 mm
      14. Shoe dimensions 900 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      10. Maximum loading height 8330 mm 10. Maximum loading height 8330 mm
      11. Maximum radius along ground level 12600 mm 11. Maximum radius along ground level 12070 mm
      12. Maximum vertical wall digging depth 6850 mm 12. Maximum vertical wall digging depth 5065 mm
      13. Maximum excavation depth 7870 mm 13. Maximum excavation depth 8470 mm
      9. Maximum cut height 11920 mm 9. Maximum cut height 11000 mm
      1. Unit load-transfer length 13290 mm 1. Unit load-transfer length 11690 mm
      3. Unit load-transfer height 4300 mm 3. Unit load-transfer height 3575 mm