- Home/
- Comparison/
- Hydraulic Shovel/
- New Holland E200SR vs. Kato HD800VIILC
New Holland E200SR vs. Kato HD800VIILC
7 reasons to buy New Holland E200SR:
Swing device
Rotation speed | 11 rev / min and 10.5 rev / min | 5 % more or 0.5 rev |
Operation
Hydraulic system overflow valve pressure | 35000 kPa and 32819 kPa | 6 % more or 2181 kPa |
Hydraulic pump flow rate | 352 l/min and 462 l/min | 24 % less or 110 l/min |
Boom reach drive mechanism fluid volume | 7.5 l. and 5 l. | 33 % more or 2.5 l. |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Booms/sections features 2
Maximum loading height | 7660 mm and 6700 mm | 13 % more or 960 mm |
Booms/sections features 1
Maximum loading height | 7360 mm and 6520 mm | 11 % more or 840 mm |
18 reasons to buy Kato HD800VIILC:
Sizes
Width to outside of caterpillar track | 3200 mm and 2800 mm | 12 % more or 400 mm |
Clearance | 480 mm and 450 mm | 6 % more or 30 mm |
Counterweight ground clearance | 1085 mm and 1030 mm | 5 % more or 55 mm |
Operation
Fuel Capacity | 320 l. and 270 l. | 16 % more or 50 l. |
Cooling system fluid volume | 25 l. and 18.5 l. | 26 % more or 6.5 l. |
Hydraulic system fluid volume | 290 l. and 167 l. | 42 % more or 123 l. |
Engine oil volume | 20 l. and 13 l. | 35 % more or 7 l. |
Motor
Displacement | 6.6 l. and 4.3 l. | 35 % more or 2.3 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Specific ground pressure | 43.2 kPa and 45 kPa | 4 % less or 1.8 kPa |
Maximum travel speed | 5.5 km/h and 5 km/h | 9 % more or 0.5 km/h |
Booms/sections features 2
Maximum excavation depth | 6720 mm and 6550 mm | 3 % more or 170 mm |
Maximum radius along ground level | 9960 mm and 9190 mm | 8 % more or 770 mm |
Maximum vertical wall digging depth | 6240 mm and 5110 mm | 18 % more or 1130 mm |
Booms/sections features 1
Maximum radius along ground level | 9520 mm and 8800 mm | 8 % more or 720 mm |
Maximum vertical wall digging depth | 5740 mm and 4710 mm | 18 % more or 1030 mm |
Maximum excavation depth | 6230 mm and 6150 mm | 1 % more or 80 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1610 mm and 3040 mm |
Caterpillar track length on ground level | 3370 mm and 3780 mm |
Operation
Generator current strength | 30 amperes and 30 amperes |
Operating voltage | 24 V and 24 V |
Working weight | 19900 kg and 21500 kg |
Motor
Manufacturer | Isuzu and Mitsubishi |
Model | - 4BG1TXBFA and 6D14-T |
Aspiration | Turbocharging with intercooler and turbocharging |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Track width | 3370 mm and 2600 mm |
Booms/sections features 2
Unit load-transfer height | 3060 mm and 2940 mm |
Maximum cut height | 10530 mm and 9800 mm |
Booms/sections features 1
Maximum cut height | 10230 mm and 9610 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2800 mm | 2. Width to outside of caterpillar track | 3200 mm |
4. Caterpillar track length on ground level | 3370 mm | 4. Caterpillar track length on ground level | 3780 mm |
5. Clearance | 450 mm | 5. Clearance | 480 mm |
8. Rear platform swing radius | 1610 mm | 8. Rear platform swing radius | 3040 mm |
15. Counterweight ground clearance | 1030 mm | 15. Counterweight ground clearance | 1085 mm |
Carrier
6. Track width | 3370 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
3. Unit load-transfer height | 3060 mm | 3. Unit load-transfer height | 2940 mm |
9. Maximum cut height | 10230 mm | 9. Maximum cut height | 10160 mm |
10. Maximum loading height | 7360 mm | 10. Maximum loading height | 7070 mm |
11. Maximum radius along ground level | 8800 mm | 11. Maximum radius along ground level | 10870 mm |
12. Maximum vertical wall digging depth | 4710 mm | 12. Maximum vertical wall digging depth | 7240 mm |
13. Maximum excavation depth | 6150 mm | 13. Maximum excavation depth | 7710 mm |
1. Unit load-transfer length | 8190 mm | 1. Unit load-transfer length | 9780 mm |