vs.

      Samsung SE280NLC-3 vs. Kato HD512E

      26 reasons to buy Samsung SE280NLC-3:

      Sizes

      Clearance 480 mm and 440 mm 8 % more or 40 mm
      Counterweight ground clearance 1125 mm and 880 mm 22 % more or 245 mm
      Width to outside of caterpillar track 2990 mm and 2490 mm 17 % more or 500 mm

      Operation

      Cooling system fluid volume 26.5 l. and 17 l. 36 % more or 9.5 l.
      Hydraulic system fluid volume 332 l. and 155 l. 53 % more or 177 l.
      Engine oil volume 25.5 l. and 17 l. 33 % more or 8.5 l.
      Boom reach drive mechanism fluid volume 11 l. and 2.5 l. 77 % more or 8.5 l.
      Fuel Capacity 470 l. and 250 l. 47 % more or 220 l.
      Generator current strength 50 amperes and 35 amperes 30 % more or 15 amperes
      Hydraulic system overflow valve pressure 34335.9 kPa and 32900 kPa 4 % more or 1435.9 kPa

      Motor

      Maximum torque 852.8 Nm and 353 Nm 59 % more or 499.8 Nm
      Cylinders number 6 and 4 33 % more or 2
      Full power 160.3 kW and 66 kW 59 % more or 94.3 kW
      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.

      Carrier

      Support rollers number on either side 2 and 1 50 % more or 1
      Rolling bearings number on either side 9 and 7 22 % more or 2
      Track shoes number per side 50 and 44 12 % more or 6

      Booms/sections features 3

      Maximum excavation depth 8300 mm and 6130 mm 26 % more or 2170 mm
      Maximum loading height 7450 mm and 6520 mm 12 % more or 930 mm
      Maximum vertical wall digging depth 7025 mm and 5470 mm 22 % more or 1555 mm

      Booms/sections features 2

      Maximum loading height 7030 mm and 6240 mm 11 % more or 790 mm
      Maximum vertical wall digging depth 6255 mm and 5070 mm 19 % more or 1185 mm
      Maximum excavation depth 7350 mm and 5620 mm 24 % more or 1730 mm

      Booms/sections features 1

      Maximum excavation depth 6850 mm and 5220 mm 24 % more or 1630 mm
      Maximum loading height 6670 mm and 6010 mm 10 % more or 660 mm
      Maximum vertical wall digging depth 5350 mm and 4670 mm 13 % more or 680 mm

      6 reasons to buy Kato HD512E:

      Swing device

      Rotation speed 12.5 rev / min and 10.8 rev / min 14 % more or 1.7 rev

      Operation

      Hydraulic pump flow rate 240 l/min and 500 l/min 52 % less or 260 l/min

      Motor

      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Carrier

      Specific ground pressure 37.3 kPa and 52 kPa 28 % less or 14.7 kPa
      Maximum travel speed 5.5 km/h and 4.4 km/h 20 % more or 1.1 km/h

      Neutral reasons:

      Sizes

      Rear platform swing radius 3150 mm and 2120 mm
      Caterpillar track length on ground level 4015 mm and 2870 mm
      Height to cab upper part 3030 mm and 2710 mm

      Operation

      Working weight 27800 kg and 11900 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Mitsubishi
      Model C8.3-C and C 4D34-T

      Carrier

      Track width 2390 mm and 1990 mm
      Shoe dimensions 600 mm and 500 mm

      Booms/sections features 3

      Maximum cut height 10445 mm and 8870 mm

      Booms/sections features 2

      Unit load-transfer length 10660 mm and 7620 mm
      Maximum cut height 10020 mm and 8610 mm

      Booms/sections features 1

      Maximum cut height 9610 mm and 8380 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2990 mm 2. Width to outside of caterpillar track 2490 mm
      4. Caterpillar track length on ground level 4015 mm 4. Caterpillar track length on ground level 2870 mm
      5. Clearance 480 mm 5. Clearance 440 mm
      7. Height to cab upper part 3030 mm 7. Height to cab upper part 2710 mm
      8. Rear platform swing radius 3150 mm 8. Rear platform swing radius 2120 mm
      15. Counterweight ground clearance 1125 mm 15. Counterweight ground clearance 880 mm

      Carrier

      6. Track width 2390 mm 6. Track width 1990 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 500 mm

      Booms/sections features 1

      13. Maximum excavation depth 7350 mm 13. Maximum excavation depth 5220 mm
      9. Maximum cut height 10445 mm 9. Maximum cut height 8610 mm
      12. Maximum vertical wall digging depth 6255 mm 12. Maximum vertical wall digging depth 5070 mm
      10. Maximum loading height 7450 mm 10. Maximum loading height 6240 mm
      1. Unit load-transfer length 10710 mm 1. Unit load-transfer length 7620 mm