- Home/
- Comparison/
- Hydraulic Shovel/
- Sumitomo SH100-2 vs. Terex TXC225LC-1
Sumitomo SH100-2 vs. Terex TXC225LC-1
5 reasons to buy Sumitomo SH100-2:
Swing device
Rotation speed | 13.6 rev / min and 12.3 rev / min | 10 % more or 1.3 rev |
Operation
Hydraulic pump flow rate | 222 l/min and 430 l/min | 48 % less or 208 l/min |
Motor
Power measured at | 2000 rev / min and 1950 rev / min | 2 % more or 50 rev |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Carrier
Specific ground pressure | 39.2 kPa and 44.1 kPa | 11 % less or 4.9 kPa |
27 reasons to buy Terex TXC225LC-1:
Sizes
Width to outside of caterpillar track | 2990 mm and 2490 mm | 17 % more or 500 mm |
Clearance | 480 mm and 440 mm | 8 % more or 40 mm |
Counterweight ground clearance | 1105 mm and 890 mm | 19 % more or 215 mm |
Operation
Fuel Capacity | 350 l. and 240 l. | 31 % more or 110 l. |
Cooling system fluid volume | 42 l. and 19 l. | 55 % more or 23 l. |
Hydraulic system fluid volume | 220 l. and 120 l. | 45 % more or 100 l. |
Engine oil volume | 19 l. and 15.5 l. | 18 % more or 3.5 l. |
Boom reach drive mechanism fluid volume | 5 l. and 2 l. | 60 % more or 3 l. |
Motor
Effective power | 110.4 kW and 60 kW | 46 % more or 50.4 kW |
Displacement | 5.8 l. and 4.3 l. | 26 % more or 1.5 l. |
Maximum torque | 603.3 Nm and 294 Nm | 51 % more or 309.3 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Track shoes number per side | 49 and 42 | 14 % more or 7 |
Support rollers number on either side | 2 and 1 | 50 % more or 1 |
Rolling bearings number on either side | 9 and 6 | 33 % more or 3 |
Booms/sections features 3
Maximum excavation depth | 7230 mm and 5640 mm | 22 % more or 1590 mm |
Maximum radius along ground level | 10230 mm and 8280 mm | 19 % more or 1950 mm |
Maximum loading height | 7020 mm and 6570 mm | 6 % more or 450 mm |
Maximum vertical wall digging depth | 6560 mm and 4880 mm | 26 % more or 1680 mm |
Booms/sections features 2
Maximum vertical wall digging depth | 6035 mm and 4510 mm | 25 % more or 1525 mm |
Maximum excavation depth | 6125 mm and 5080 mm | 17 % more or 1045 mm |
Maximum radius along ground level | 9400 mm and 7820 mm | 17 % more or 1580 mm |
Maximum loading height | 6885 mm and 6310 mm | 8 % more or 575 mm |
Booms/sections features 1
Maximum excavation depth | 6630 mm and 4790 mm | 28 % more or 1840 mm |
Maximum radius along ground level | 9735 mm and 7550 mm | 22 % more or 2185 mm |
Maximum loading height | 6810 mm and 6090 mm | 11 % more or 720 mm |
Maximum vertical wall digging depth | 6045 mm and 4220 mm | 30 % more or 1825 mm |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 2610 mm and 3645 mm |
Height to cab upper part | 2695 mm and 3000 mm |
Rear platform swing radius | 2050 mm and 2750 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 11480 kg and 21500.3 kg |
Motor
Manufacturer | Isuzu and Daewoo |
Model | A-4BG1T and DE58TIS |
Aspiration | turbocharging and turbocharging, with subsequent cooling of charging air by oncoming air flow |
Carrier
Shoe dimensions | 500 mm and 600 mm |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Track width | 1990 mm and 2390 mm |
Booms/sections features 3
Maximum cut height | 8950 mm and 9870 mm |
Booms/sections features 2
Maximum cut height | 8700 mm and 9825 mm |
Booms/sections features 1
Maximum cut height | 8480 mm and 9660 mm |
Unit load-transfer height | 2695 mm and 3030 mm |
Unit load-transfer length | 7260 mm and 9510 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2490 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 2610 mm | 4. Caterpillar track length on ground level | 3645 mm |
5. Clearance | 440 mm | 5. Clearance | 480 mm |
7. Height to cab upper part | 2695 mm | 7. Height to cab upper part | 3000 mm |
8. Rear platform swing radius | 2050 mm | 8. Rear platform swing radius | 2750 mm |
15. Counterweight ground clearance | 890 mm | 15. Counterweight ground clearance | 1105 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 2390 mm |
14. Shoe dimensions | 500 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 7260 mm | 1. Unit load-transfer length | 9510 mm |
3. Unit load-transfer height | 2695 mm | 3. Unit load-transfer height | 3030 mm |
9. Maximum cut height | 8950 mm | 9. Maximum cut height | 9825 mm |
10. Maximum loading height | 6570 mm | 10. Maximum loading height | 6885 mm |
11. Maximum radius along ground level | 8280 mm | 11. Maximum radius along ground level | 9400 mm |
12. Maximum vertical wall digging depth | 4880 mm | 12. Maximum vertical wall digging depth | 6035 mm |
13. Maximum excavation depth | 5640 mm | 13. Maximum excavation depth | 6125 mm |