- Home/
- Comparison/
- Hydraulic Shovel/
- Sumitomo SH120-2 vs. Hitachi ZX450HLC
Sumitomo SH120-2 vs. Hitachi ZX450HLC
8 reasons to buy Sumitomo SH120-2:
Swing device
Rotation speed | 13.4 rev / min and 9 rev / min | 33 % more or 4.4 rev |
Operation
Hydraulic pump flow rate | 242 l/min and 360 l/min | 33 % less or 118 l/min |
Motor
Power measured at | 2200 rev / min and 1800 rev / min | 18 % more or 400 rev |
Torque measured at | 1600 rev / min and 1500 rev / min | 6 % more or 100 rev |
Carrier
Specific ground pressure | 40.2 kPa and 78 kPa | 48 % less or 37.8 kPa |
Booms/sections features 3
Maximum vertical wall digging depth | 5440 mm and 4780 mm | 12 % more or 660 mm |
Booms/sections features 2
Maximum vertical wall digging depth | 4980 mm and 4950 mm | 1 % more or 30 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 4580 mm and 4260 mm | 7 % more or 320 mm |
24 reasons to buy Hitachi ZX450HLC:
Sizes
Width to outside of caterpillar track | 3490 mm and 2490 mm | 29 % more or 1000 mm |
Clearance | 738 mm and 440 mm | 40 % more or 298 mm |
Counterweight ground clearance | 1350 mm and 890 mm | 34 % more or 460 mm |
Operation
Fuel Capacity | 650 l. and 240 l. | 63 % more or 410 l. |
Cooling system fluid volume | 61 l. and 19 l. | 69 % more or 42 l. |
Hydraulic system fluid volume | 510 l. and 120 l. | 76 % more or 390 l. |
Engine oil volume | 55 l. and 15.5 l. | 72 % more or 39.5 l. |
Boom reach drive mechanism fluid volume | 6.5 l. and 2 l. | 69 % more or 4.5 l. |
Motor
Displacement | 15.7 l. and 4.3 l. | 73 % more or 11.4 l. |
Maximum torque | 1275 Nm and 294 Nm | 77 % more or 981 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 234.1 kW and 65 kW | 72 % more or 169.1 kW |
Carrier
Track shoes number per side | 53 and 44 | 17 % more or 9 |
Support rollers number on either side | 3 and 1 | 67 % more or 2 |
Rolling bearings number on either side | 9 and 6 | 33 % more or 3 |
Booms/sections features 3
Maximum excavation depth | 7300 mm and 6050 mm | 17 % more or 1250 mm |
Maximum radius along ground level | 11190 mm and 8790 mm | 21 % more or 2400 mm |
Maximum loading height | 7040 mm and 7020 mm | 0 % more or 20 mm |
Booms/sections features 2
Maximum loading height | 7340 mm and 6700 mm | 9 % more or 640 mm |
Maximum excavation depth | 6230 mm and 5550 mm | 11 % more or 680 mm |
Maximum radius along ground level | 10600 mm and 8340 mm | 21 % more or 2260 mm |
Booms/sections features 1
Maximum excavation depth | 5800 mm and 5150 mm | 11 % more or 650 mm |
Maximum radius along ground level | 10210 mm and 7970 mm | 22 % more or 2240 mm |
Maximum loading height | 7310 mm and 6430 mm | 12 % more or 880 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2695 mm and 3370 mm |
Rear platform swing radius | 2050 mm and 3500 mm |
Caterpillar track length on ground level | 2780 mm and 4470 mm |
Operation
Working weight | 12480 kg and 45800 kg |
Operating voltage | 24 V and 12 V |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Isuzu and Isuzu |
Model | A-4BG1T and AA-6WG1TQA |
Carrier
Shoe dimensions | 500 mm and 600 mm |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Track width | 1990 mm and 2890 mm |
Booms/sections features 3
Unit load-transfer height | 2695 mm and 3370 mm |
Unit load-transfer length | 7600 mm and 11820 mm |
Maximum cut height | 9410 mm and 10270 mm |
Booms/sections features 2
Maximum cut height | 9090 mm and 10890 mm |
Unit load-transfer height | 2695 mm and 3370 mm |
Unit load-transfer length | 7600 mm and 11820 mm |
Booms/sections features 1
Unit load-transfer height | 2695 mm and 3370 mm |
Unit load-transfer length | 7600 mm and 11820 mm |
Maximum cut height | 8820 mm and 10650 mm |
Images
Sizes
7. Height to cab upper part | 2695 mm | 7. Height to cab upper part | 3370 mm |
8. Rear platform swing radius | 2050 mm | 8. Rear platform swing radius | 3500 mm |
15. Counterweight ground clearance | 890 mm | 15. Counterweight ground clearance | 1350 mm |
2. Width to outside of caterpillar track | 2490 mm | 2. Width to outside of caterpillar track | 3490 mm |
4. Caterpillar track length on ground level | 2780 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 440 mm | 5. Clearance | 738 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 2890 mm |
14. Shoe dimensions | 500 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 6050 mm | 13. Maximum excavation depth | 7620 mm |
9. Maximum cut height | 9410 mm | 9. Maximum cut height | 10650 mm |
1. Unit load-transfer length | 7600 mm | 1. Unit load-transfer length | 11820 mm |
10. Maximum loading height | 7020 mm | 10. Maximum loading height | 7310 mm |
3. Unit load-transfer height | 2695 mm | 3. Unit load-transfer height | 3370 mm |
11. Maximum radius along ground level | 8790 mm | 11. Maximum radius along ground level | 10210 mm |
12. Maximum vertical wall digging depth | 5440 mm | 12. Maximum vertical wall digging depth | 4260 mm |