vs.

      Terex TXC180LC-2 vs. Kato HD1430IIILC

      4 reasons to buy Terex TXC180LC-2:

      Swing device

      Rotation speed 10.7 rev / min and 10 rev / min 7 % more or 0.7 rev

      Operation

      Generator current strength 80 amperes and 35 amperes 56 % more or 45 amperes
      Hydraulic pump flow rate 304 l/min and 602 l/min 50 % less or 298 l/min

      Carrier

      Specific ground pressure 41.2 kPa and 58 kPa 29 % less or 16.8 kPa

      25 reasons to buy Kato HD1430IIILC:

      Sizes

      Width to outside of caterpillar track 3200 mm and 2800 mm 12 % more or 400 mm
      Clearance 500 mm and 455 mm 9 % more or 45 mm
      Counterweight ground clearance 1130 mm and 1035 mm 8 % more or 95 mm

      Operation

      Fuel Capacity 580 l. and 280 l. 52 % more or 300 l.
      Cooling system fluid volume 36 l. and 20 l. 44 % more or 16 l.
      Hydraulic system fluid volume 485 l. and 186 l. 62 % more or 299 l.
      Engine oil volume 32 l. and 25 l. 22 % more or 7 l.
      Boom reach drive mechanism fluid volume 11.3 l. and 3.8 l. 66 % more or 7.5 l.
      Hydraulic system overflow valve pressure 32900 kPa and 32398.4 kPa 2 % more or 501.6 kPa

      Motor

      Displacement 7.5 l. and 5.9 l. 21 % more or 1.6 l.
      Torque measured at 1800 rev / min and 1400 rev / min 22 % more or 400 rev
      Maximum torque 831 Nm and 470.5 Nm 43 % more or 360.5 Nm
      Power measured at 2150 rev / min and 1950 rev / min 9 % more or 200 rev

      Carrier

      Track shoes number per side 51 and 44 14 % more or 7
      Maximum travel speed 5.5 km/h and 5 km/h 9 % more or 0.5 km/h
      Rolling bearings number on either side 8 and 7 12 % more or 1

      Booms/sections features 3

      Maximum loading height 7570 mm and 6490 mm 14 % more or 1080 mm
      Maximum vertical wall digging depth 7480 mm and 5130 mm 31 % more or 2350 mm
      Maximum excavation depth 8400 mm and 6620 mm 21 % more or 1780 mm

      Booms/sections features 2

      Maximum excavation depth 7400 mm and 6120 mm 17 % more or 1280 mm
      Maximum loading height 7280 mm and 6490 mm 11 % more or 790 mm
      Maximum vertical wall digging depth 6560 mm and 5030 mm 23 % more or 1530 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 5740 mm and 4660 mm 19 % more or 1080 mm
      Maximum excavation depth 6720 mm and 5720 mm 15 % more or 1000 mm
      Maximum loading height 7110 mm and 6260 mm 12 % more or 850 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2925 mm and 3020 mm
      Rear platform swing radius 2450 mm and 3460 mm

      Operation

      Working weight 17659.7 kg and 31100 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging
      Manufacturer Doosan and Mitsubishi
      Model DL06 and C 6D16-TLE2A

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Support rollers number on either side 2 and 2
      Track width 2200 mm and 2600 mm

      Booms/sections features 3

      Maximum cut height 9110 mm and 10610 mm

      Booms/sections features 2

      Maximum cut height 9180 mm and 10330 mm

      Booms/sections features 1

      Maximum cut height 8950 mm and 10140 mm

      Images

      Sizes

      15. Counterweight ground clearance 1035 mm 15. Counterweight ground clearance 1130 mm
      5. Clearance 455 mm 5. Clearance 500 mm
      7. Height to cab upper part 2925 mm 7. Height to cab upper part 3020 mm
      8. Rear platform swing radius 2450 mm 8. Rear platform swing radius 3460 mm
      2. Width to outside of caterpillar track 2800 mm 2. Width to outside of caterpillar track 3200 mm

      Carrier

      6. Track width 2200 mm 6. Track width 2600 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      9. Maximum cut height 9110 mm 9. Maximum cut height 10610 mm
      10. Maximum loading height 6490 mm 10. Maximum loading height 7570 mm
      12. Maximum vertical wall digging depth 5130 mm 12. Maximum vertical wall digging depth 7480 mm
      13. Maximum excavation depth 6620 mm 13. Maximum excavation depth 8400 mm