- Home/
- Comparison/
- Hydraulic Shovel/
- Terex TXC225LC-1 vs. Link-Belt 330LX Level 3
Terex TXC225LC-1 vs. Link-Belt 330LX Level 3
7 reasons to buy Terex TXC225LC-1:
Swing device
| Rotation speed | 12.3 rev / min and 9.6 rev / min | 22 % more or 2.7 rev |
Operation
| Hydraulic pump flow rate | 430 l/min and 567.8 l/min | 24 % less or 137.8 l/min |
| Cooling system fluid volume | 42 l. and 30 l. | 29 % more or 12 l. |
Carrier
| Track shoes number per side | 49 and 48 | 2 % more or 1 |
| Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
| Specific ground pressure | 44.1 kPa and 50 kPa | 12 % less or 5.9 kPa |
Booms/sections features 2
| Maximum vertical wall digging depth | 6035 mm and 5970 mm | 1 % more or 65 mm |
24 reasons to buy Link-Belt 330LX Level 3:
Sizes
| Counterweight ground clearance | 1210 mm and 1105 mm | 9 % more or 105 mm |
| Width to outside of caterpillar track | 3400 mm and 2990 mm | 12 % more or 410 mm |
Shovel
| Maximum bucket volume | 2.2 m3 and 1.3 m3 | 41 % more or 0.9 m3 |
Operation
| Engine oil volume | 38 l. and 19 l. | 50 % more or 19 l. |
| Boom reach drive mechanism fluid volume | 6 l. and 5 l. | 17 % more or 1 l. |
| Hydraulic system overflow valve pressure | 34266.9 kPa and 32336.4 kPa | 6 % more or 1930.5 kPa |
| Fuel Capacity | 580 l. and 350 l. | 40 % more or 230 l. |
| Hydraulic system fluid volume | 350 l. and 220 l. | 37 % more or 130 l. |
Motor
| Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
| Maximum torque | 1080.6 Nm and 603.3 Nm | 44 % more or 477.3 Nm |
| Effective power | 202.1 kW and 110.4 kW | 45 % more or 91.7 kW |
| Power measured at | 2000 rev / min and 1950 rev / min | 2 % more or 50 rev |
| Displacement | 7.8 l. and 5.8 l. | 26 % more or 2.0 l. |
Booms/sections features 3
| Maximum excavation depth | 8140 mm and 7230 mm | 11 % more or 910 mm |
| Maximum radius along ground level | 11720 mm and 10230 mm | 13 % more or 1490 mm |
| Maximum loading height | 7540 mm and 7020 mm | 7 % more or 520 mm |
| Maximum vertical wall digging depth | 7150 mm and 6560 mm | 8 % more or 590 mm |
Booms/sections features 2
| Maximum excavation depth | 6730 mm and 6125 mm | 9 % more or 605 mm |
| Maximum radius along ground level | 10470 mm and 9400 mm | 10 % more or 1070 mm |
| Maximum loading height | 7140 mm and 6885 mm | 4 % more or 255 mm |
Booms/sections features 1
| Maximum vertical wall digging depth | 6350 mm and 6045 mm | 5 % more or 305 mm |
| Maximum excavation depth | 7340 mm and 6630 mm | 10 % more or 710 mm |
| Maximum radius along ground level | 10980 mm and 9735 mm | 11 % more or 1245 mm |
| Maximum loading height | 7230 mm and 6810 mm | 6 % more or 420 mm |
Neutral reasons:
Sizes
| Caterpillar track length on ground level | 3645 mm and 4040 mm |
| Rear platform swing radius | 2750 mm and 3420 mm |
| Height to cab upper part | 3000 mm and 3200 mm |
Operation
| Operating voltage | 24 V and 24 V |
| Working weight | 21500.3 kg and 35607 kg |
Motor
| Cylinders number | 6 and 6 |
| Aspiration | turbocharging, with subsequent cooling of charging air by oncoming air flow and Turbocharging with intercooler |
| Manufacturer | Daewoo and Isuzu |
| Model | DE58TIS and AH-6HK1XYSS |
Carrier
| Shoe dimensions | 600 mm and 800 mm |
| Support rollers number on either side | 2 and 2 |
| Maximum travel speed | 5.5 km/h and 5.5 km/h |
| Track width | 2390 mm and 2600 mm |
Booms/sections features 3
| Maximum cut height | 9870 mm and 10670 mm |
Booms/sections features 2
| Maximum cut height | 9825 mm and 10320 mm |
Booms/sections features 1
| Unit load-transfer height | 3030 mm and 3290 mm |
| Unit load-transfer length | 9510 mm and 11050 mm |
| Maximum cut height | 9660 mm and 10370 mm |
Images
Sizes
| 15. Counterweight ground clearance | 1105 mm | 15. Counterweight ground clearance | 1210 mm |
| 2. Width to outside of caterpillar track | 2990 mm | 2. Width to outside of caterpillar track | 3400 mm |
| 4. Caterpillar track length on ground level | 3645 mm | 4. Caterpillar track length on ground level | 4040 mm |
| 7. Height to cab upper part | 3000 mm | 7. Height to cab upper part | 3200 mm |
| 8. Rear platform swing radius | 2750 mm | 8. Rear platform swing radius | 3420 mm |
Carrier
| 6. Track width | 2390 mm | 6. Track width | 2600 mm |
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
| 3. Unit load-transfer height | 3030 mm | 3. Unit load-transfer height | 3290 mm |
| 13. Maximum excavation depth | 6630 mm | 13. Maximum excavation depth | 7340 mm |
| 9. Maximum cut height | 9825 mm | 9. Maximum cut height | 10370 mm |
| 10. Maximum loading height | 6885 mm | 10. Maximum loading height | 7230 mm |
| 11. Maximum radius along ground level | 9400 mm | 11. Maximum radius along ground level | 10980 mm |
| 12. Maximum vertical wall digging depth | 6035 mm | 12. Maximum vertical wall digging depth | 6350 mm |
| 1. Unit load-transfer length | 9510 mm | 1. Unit load-transfer length | 11130 mm |