- Home/
- Comparison/
- Hydraulic Shovel/
- Terex TXC480LC-2 vs. Hitachi ZX450HLC
Terex TXC480LC-2 vs. Hitachi ZX450HLC
17 reasons to buy Terex TXC480LC-2:
Sizes
| Clearance | 770 mm and 738 mm | 4 % more or 32 mm |
| Counterweight ground clearance | 1460 mm and 1350 mm | 8 % more or 110 mm |
| Width to outside of caterpillar track | 3900 mm and 3490 mm | 11 % more or 410 mm |
Shovel
| Bucket initial volume | 2.1 m3 and 1.9 m3 | 10 % more or 0.2 m3 |
| Maximum bucket volume | 2.9 m3 and 2.7 m3 | 7 % more or 0.2 m3 |
Motor
| Effective power | 244.6 kW and 234.1 kW | 4 % more or 10.5 kW |
| Maximum torque | 1541.6 Nm and 1275 Nm | 17 % more or 266.6 Nm |
Booms/sections features 3
| Maximum excavation depth | 8440 mm and 7300 mm | 14 % more or 1140 mm |
| Maximum radius along ground level | 12430 mm and 11190 mm | 10 % more or 1240 mm |
| Maximum loading height | 8040 mm and 7040 mm | 12 % more or 1000 mm |
| Maximum vertical wall digging depth | 4965 mm and 4780 mm | 4 % more or 185 mm |
Booms/sections features 2
| Maximum radius along ground level | 11870 mm and 10600 mm | 11 % more or 1270 mm |
| Maximum loading height | 7880 mm and 7340 mm | 7 % more or 540 mm |
| Maximum excavation depth | 7810 mm and 6230 mm | 20 % more or 1580 mm |
Booms/sections features 1
| Maximum excavation depth | 7360 mm and 5800 mm | 21 % more or 1560 mm |
| Maximum radius along ground level | 11460 mm and 10210 mm | 11 % more or 1250 mm |
| Maximum loading height | 7730 mm and 7310 mm | 5 % more or 420 mm |
15 reasons to buy Hitachi ZX450HLC:
Swing device
| Rotation speed | 9 rev / min and 8.8 rev / min | 2 % more or 0.2 rev |
Shovel
| Bucket minimum volume | 1.2 m3 and 1.7 m3 | 29 % less or 0.5 m3 |
Operation
| Hydraulic system fluid volume | 510 l. and 265 l. | 48 % more or 245 l. |
| Engine oil volume | 55 l. and 44 l. | 20 % more or 11 l. |
| Boom reach drive mechanism fluid volume | 6.5 l. and 4 l. | 38 % more or 2.5 l. |
| Fuel Capacity | 650 l. and 620 l. | 5 % more or 30 l. |
| Cooling system fluid volume | 61 l. and 40 l. | 34 % more or 21 l. |
| Hydraulic system overflow valve pressure | 34335.9 kPa and 31371.1 kPa | 9 % more or 2964.8 kPa |
| Hydraulic pump flow rate | 360 l/min and 710 l/min | 49 % less or 350 l/min |
Motor
| Displacement | 15.7 l. and 11 l. | 30 % more or 4.7 l. |
| Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Carrier
| Maximum travel speed | 5.5 km/h and 5 km/h | 9 % more or 0.5 km/h |
| Specific ground pressure | 78 kPa and 79.3 kPa | 2 % less or 1.3 kPa |
Booms/sections features 2
| Maximum vertical wall digging depth | 4950 mm and 4410 mm | 11 % more or 540 mm |
Booms/sections features 1
| Maximum vertical wall digging depth | 4260 mm and 4080 mm | 4 % more or 180 mm |
Neutral reasons:
Sizes
| Rear platform swing radius | 3700 mm and 3500 mm |
| Caterpillar track length on ground level | 4470 mm and 4470 mm |
| Height to cab upper part | 3350 mm and 3370 mm |
Operation
| Working weight | 47491.1 kg and 45800 kg |
| Operating voltage | 24 V and 12 V |
Motor
| Cylinders number | 6 and 6 |
| Aspiration | turbocharging, with subsequent cooling of charging air by oncoming air flow and turbocharging |
| Manufacturer | Doosan and Isuzu |
| Model | DV11 and AA-6WG1TQA |
| Power measured at | 1800 rev / min and 1800 rev / min |
Carrier
| Track width | 3300 mm and 2890 mm |
| Track shoes number per side | 53 and 53 |
| Shoe dimensions | 600 mm and 600 mm |
| Support rollers number on either side | 3 and 3 |
| Rolling bearings number on either side | 9 and 9 |
Booms/sections features 3
| Maximum cut height | 11230 mm and 10270 mm |
Booms/sections features 2
| Maximum cut height | 11080 mm and 10890 mm |
| Unit load-transfer height | 3730 mm and 3370 mm |
| Unit load-transfer length | 12130 mm and 11820 mm |
Booms/sections features 1
| Maximum cut height | 10940 mm and 10650 mm |
Images
Sizes
| 2. Width to outside of caterpillar track | 3900 mm | 2. Width to outside of caterpillar track | 3490 mm |
| 4. Caterpillar track length on ground level | 4470 mm | 4. Caterpillar track length on ground level | 4470 mm |
| 5. Clearance | 770 mm | 5. Clearance | 738 mm |
| 7. Height to cab upper part | 3350 mm | 7. Height to cab upper part | 3370 mm |
| 8. Rear platform swing radius | 3700 mm | 8. Rear platform swing radius | 3500 mm |
| 15. Counterweight ground clearance | 1460 mm | 15. Counterweight ground clearance | 1350 mm |
Carrier
| 6. Track width | 3300 mm | 6. Track width | 2890 mm |
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
| 1. Unit load-transfer length | 12130 mm | 1. Unit load-transfer length | 11820 mm |
| 10. Maximum loading height | 7730 mm | 10. Maximum loading height | 7340 mm |
| 3. Unit load-transfer height | 3730 mm | 3. Unit load-transfer height | 3370 mm |
| 11. Maximum radius along ground level | 11460 mm | 11. Maximum radius along ground level | 10600 mm |
| 9. Maximum cut height | 11080 mm | 9. Maximum cut height | 10890 mm |
| 12. Maximum vertical wall digging depth | 4080 mm | 12. Maximum vertical wall digging depth | 4950 mm |
| 13. Maximum excavation depth | 7360 mm | 13. Maximum excavation depth | 6230 mm |