vs.

      Terex TXC480LC-2 vs. Komatsu PC240NLC-7SLF

      12 reasons to buy Terex TXC480LC-2:

      Sizes

      Width to outside of caterpillar track 3900 mm and 2980 mm 24 % more or 920 mm
      Clearance 770 mm and 440 mm 43 % more or 330 mm
      Counterweight ground clearance 1460 mm and 1100 mm 25 % more or 360 mm

      Operation

      Generator current strength 300 amperes and 60 amperes 80 % more or 240 amperes
      Fuel Capacity 620 l. and 400 l. 35 % more or 220 l.
      Cooling system fluid volume 40 l. and 30.9 l. 23 % more or 9.1 l.
      Hydraulic system fluid volume 265 l. and 143 l. 46 % more or 122 l.
      Engine oil volume 44 l. and 24 l. 45 % more or 20 l.

      Motor

      Effective power 244.6 kW and 125.3 kW 49 % more or 119.3 kW
      Displacement 11 l. and 5.9 l. 46 % more or 5.1 l.

      Carrier

      Track shoes number per side 53 and 49 8 % more or 4
      Support rollers number on either side 3 and 2 33 % more or 1

      11 reasons to buy Komatsu PC240NLC-7SLF:

      Swing device

      Rotation speed 11.7 rev / min and 8.8 rev / min 25 % more or 2.9 rev

      Operation

      Boom reach drive mechanism fluid volume 6.6 l. and 4 l. 39 % more or 2.6 l.
      Hydraulic system overflow valve pressure 37265.2 kPa and 31371.1 kPa 16 % more or 5894.1 kPa
      Hydraulic pump flow rate 440 l/min and 710 l/min 38 % less or 270 l/min

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Carrier

      Specific ground pressure 58.8 kPa and 79.3 kPa 26 % less or 20.5 kPa
      Maximum travel speed 5.5 km/h and 5 km/h 9 % more or 0.5 km/h

      Booms/sections features 1

      Maximum excavation depth 14580 mm and 7360 mm 50 % more or 7220 mm
      Maximum loading height 12860 mm and 7730 mm 40 % more or 5130 mm
      Maximum radius along ground level 18250 mm and 11460 mm 37 % more or 6790 mm
      Maximum vertical wall digging depth 10385 mm and 4080 mm 61 % more or 6305 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3350 mm and 3015 mm
      Rear platform swing radius 3700 mm and 2940 mm
      Caterpillar track length on ground level 4470 mm and 3655 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 47491.1 kg and 26119 kg

      Motor

      Model DV11 and SAA6D102E-2
      Manufacturer Doosan and Komatsu
      Aspiration turbocharging, with subsequent cooling of charging air by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Rolling bearings number on either side 9 and 9
      Track width 3300 mm and 2380 mm

      Booms/sections features 1

      Maximum cut height 10940 mm and 14970 mm

      Images

      Sizes

      4. Caterpillar track length on ground level 4470 mm 4. Caterpillar track length on ground level 3655 mm
      5. Clearance 770 mm 5. Clearance 440 mm
      7. Height to cab upper part 3350 mm 7. Height to cab upper part 3015 mm
      8. Rear platform swing radius 3700 mm 8. Rear platform swing radius 2940 mm
      15. Counterweight ground clearance 1460 mm 15. Counterweight ground clearance 1100 mm
      2. Width to outside of caterpillar track 3900 mm 2. Width to outside of caterpillar track 2980 mm

      Carrier

      6. Track width 3300 mm 6. Track width 2380 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      9. Maximum cut height 11230 mm 9. Maximum cut height 14970 mm
      10. Maximum loading height 8040 mm 10. Maximum loading height 12860 mm
      11. Maximum radius along ground level 12430 mm 11. Maximum radius along ground level 18250 mm
      12. Maximum vertical wall digging depth 4965 mm 12. Maximum vertical wall digging depth 10385 mm
      13. Maximum excavation depth 8440 mm 13. Maximum excavation depth 14580 mm
      1. Unit load-transfer length 12130 mm 1. Unit load-transfer length 14400 mm
      3. Unit load-transfer height 3730 mm 3. Unit load-transfer height 3230 mm