vs.

      Terex TXC520LC-2 vs. Case CX135

      22 reasons to buy Terex TXC520LC-2:

      Sizes

      Clearance 770 mm and 440 mm 43 % more or 330 mm
      Counterweight ground clearance 1460 mm and 880 mm 40 % more or 580 mm
      Width to outside of caterpillar track 3900 mm and 2590 mm 34 % more or 1310 mm

      Operation

      Boom reach drive mechanism fluid volume 4 l. and 3 l. 25 % more or 1 l.
      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes
      Fuel Capacity 620 l. and 165 l. 73 % more or 455 l.
      Cooling system fluid volume 40 l. and 14.1 l. 65 % more or 25.9 l.
      Hydraulic system fluid volume 500 l. and 130 l. 74 % more or 370 l.
      Engine oil volume 44 l. and 17.2 l. 61 % more or 26.8 l.

      Motor

      Effective power 244.6 kW and 70.9 kW 71 % more or 173.7 kW
      Displacement 11 l. and 3 l. 73 % more or 8 l.
      Maximum torque 1541.6 Nm and 359.3 Nm 77 % more or 1182.3 Nm
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Track shoes number per side 53 and 43 19 % more or 10
      Support rollers number on either side 3 and 1 67 % more or 2
      Rolling bearings number on either side 9 and 6 33 % more or 3

      Booms/sections features 2

      Maximum excavation depth 8440 mm and 5470 mm 35 % more or 2970 mm
      Maximum radius along ground level 12430 mm and 8070 mm 35 % more or 4360 mm
      Maximum loading height 8040 mm and 6910 mm 14 % more or 1130 mm
      Maximum vertical wall digging depth 4965 mm and 4850 mm 2 % more or 115 mm

      Booms/sections features 1

      Maximum excavation depth 6770 mm and 5910 mm 13 % more or 860 mm
      Maximum radius along ground level 10460 mm and 8430 mm 19 % more or 2030 mm

      8 reasons to buy Case CX135:

      Swing device

      Rotation speed 10 rev / min and 8.8 rev / min 12 % more or 1.2 rev

      Operation

      Hydraulic system overflow valve pressure 34301.4 kPa and 31371.1 kPa 9 % more or 2930.3 kPa
      Hydraulic pump flow rate 117.2 l/min and 710 l/min 83 % less or 592.8 l/min

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Carrier

      Specific ground pressure 36.5 kPa and 86.2 kPa 58 % less or 49.7 kPa

      Booms/sections features 1

      Maximum loading height 7130 mm and 6720 mm 6 % more or 410 mm
      Maximum vertical wall digging depth 5080 mm and 1190 mm 77 % more or 3890 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 3700 mm and 1480 mm
      Caterpillar track length on ground level 4470 mm and 2790 mm
      Height to cab upper part 3350 mm and 2750 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 51392 kg and 13440 kg

      Motor

      Manufacturer Doosan and Isuzu
      Model DV11 and AJ-4JJ1X, III Level III certified
      Aspiration turbocharging, with subsequent cooling of charging air by oncoming air flow and turbocharging

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Maximum travel speed 5 km/h and 5 km/h

      Booms/sections features 2

      Maximum cut height 11230 mm and 9310 mm

      Booms/sections features 1

      Unit load-transfer length 11430 mm and 7230 mm
      Maximum cut height 9600 mm and 9520 mm
      Unit load-transfer height 4200 mm and 2750 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3900 mm 2. Width to outside of caterpillar track 2590 mm
      4. Caterpillar track length on ground level 4470 mm 4. Caterpillar track length on ground level 2790 mm
      5. Clearance 770 mm 5. Clearance 440 mm
      7. Height to cab upper part 3350 mm 7. Height to cab upper part 2750 mm
      8. Rear platform swing radius 3700 mm 8. Rear platform swing radius 1480 mm
      15. Counterweight ground clearance 1460 mm 15. Counterweight ground clearance 880 mm

      Carrier

      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      10. Maximum loading height 6720 mm 10. Maximum loading height 6910 mm
      11. Maximum radius along ground level 10460 mm 11. Maximum radius along ground level 8070 mm
      12. Maximum vertical wall digging depth 1190 mm 12. Maximum vertical wall digging depth 4850 mm
      1. Unit load-transfer length 11430 mm 1. Unit load-transfer length 7230 mm
      3. Unit load-transfer height 4200 mm 3. Unit load-transfer height 2750 mm
      13. Maximum excavation depth 6770 mm 13. Maximum excavation depth 5470 mm
      9. Maximum cut height 11230 mm 9. Maximum cut height 9310 mm