- Home/
- Comparison/
- Hydraulic Shovel/
- Terex TXC520LC-2 vs. Hitachi ZX850LC-3
Terex TXC520LC-2 vs. Hitachi ZX850LC-3
5 reasons to buy Terex TXC520LC-2:
Swing device
| Rotation speed | 8.8 rev / min and 7.3 rev / min | 17 % more or 1.5 rev |
Operation
| Hydraulic pump flow rate | 710 l/min and 1056 l/min | 33 % less or 346 l/min |
Carrier
| Maximum travel speed | 5 km/h and 4.1 km/h | 18 % more or 0.9 km/h |
| Specific ground pressure | 86.2 kPa and 112 kPa | 23 % less or 25.8 kPa |
| Track shoes number per side | 53 and 51 | 4 % more or 2 |
27 reasons to buy Hitachi ZX850LC-3:
Sizes
| Width to outside of caterpillar track | 4100 mm and 3900 mm | 5 % more or 200 mm |
| Clearance | 890 mm and 770 mm | 13 % more or 120 mm |
| Counterweight ground clearance | 1680 mm and 1460 mm | 13 % more or 220 mm |
Shovel
| Bucket initial volume | 3.5 m3 and 3.2 m3 | 9 % more or 0.3 m3 |
| Maximum bucket volume | 4.5 m3 and 3.2 m3 | 29 % more or 1.3 m3 |
Operation
| Fuel Capacity | 1120 l. and 620 l. | 45 % more or 500 l. |
| Cooling system fluid volume | 116 l. and 40 l. | 66 % more or 76 l. |
| Hydraulic system fluid volume | 790 l. and 500 l. | 37 % more or 290 l. |
| Engine oil volume | 57 l. and 44 l. | 23 % more or 13 l. |
| Boom reach drive mechanism fluid volume | 15 l. and 4 l. | 73 % more or 11 l. |
| Hydraulic system overflow valve pressure | 34300 kPa and 31371.1 kPa | 9 % more or 2928.9 kPa |
Motor
| Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
| Maximum torque | 2250 Nm and 1541.6 Nm | 31 % more or 708.4 Nm |
| Effective power | 397 kW and 244.6 kW | 38 % more or 152.4 kW |
| Displacement | 15.7 l. and 11 l. | 30 % more or 4.7 l. |
Booms/sections features 3
| Maximum vertical wall digging depth | 8480 mm and 4410 mm | 48 % more or 4070 mm |
| Maximum loading height | 9740 mm and 7880 mm | 19 % more or 1860 mm |
| Maximum excavation depth | 9570 mm and 7810 mm | 18 % more or 1760 mm |
| Maximum radius along ground level | 14640 mm and 11870 mm | 19 % more or 2770 mm |
Booms/sections features 2
| Maximum loading height | 9080 mm and 8040 mm | 11 % more or 1040 mm |
| Maximum vertical wall digging depth | 7170 mm and 4965 mm | 31 % more or 2205 mm |
| Maximum excavation depth | 8870 mm and 8440 mm | 5 % more or 430 mm |
| Maximum radius along ground level | 13820 mm and 12430 mm | 10 % more or 1390 mm |
Booms/sections features 1
| Maximum loading height | 8130 mm and 6720 mm | 17 % more or 1410 mm |
| Maximum vertical wall digging depth | 4100 mm and 1190 mm | 71 % more or 2910 mm |
| Maximum excavation depth | 7140 mm and 6770 mm | 5 % more or 370 mm |
| Maximum radius along ground level | 12020 mm and 10460 mm | 13 % more or 1560 mm |
Neutral reasons:
Sizes
| Height to cab upper part | 3350 mm and 3630 mm |
| Rear platform swing radius | 3700 mm and 4600 mm |
| Caterpillar track length on ground level | 4470 mm and 5110 mm |
Operation
| Working weight | 51392 kg and 82200 kg |
Motor
| Aspiration | turbocharging, with subsequent cooling of charging air by oncoming air flow and turbocharging |
| Cylinders number | 6 and 6 |
| Manufacturer | Doosan and Isuzu |
| Model | DV11 and AH-6WG1XYSA-03 |
| Power measured at | 1800 rev / min and 1800 rev / min |
Carrier
| Rolling bearings number on either side | 9 and 9 |
| Shoe dimensions | 600 mm and 650 mm |
| Support rollers number on either side | 3 and 3 |
Booms/sections features 3
| Maximum cut height | 11080 mm and 13820 mm |
Booms/sections features 2
| Maximum cut height | 11230 mm and 13030 mm |
Booms/sections features 1
| Maximum cut height | 9600 mm and 12010 mm |
Images
Sizes
| 4. Caterpillar track length on ground level | 4470 mm | 4. Caterpillar track length on ground level | 5110 mm |
| 5. Clearance | 770 mm | 5. Clearance | 890 mm |
| 7. Height to cab upper part | 3350 mm | 7. Height to cab upper part | 3630 mm |
| 8. Rear platform swing radius | 3700 mm | 8. Rear platform swing radius | 4600 mm |
| 15. Counterweight ground clearance | 1460 mm | 15. Counterweight ground clearance | 1680 mm |
| 2. Width to outside of caterpillar track | 3900 mm | 2. Width to outside of caterpillar track | 4100 mm |
Carrier
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 650 mm |
Booms/sections features 1
| 12. Maximum vertical wall digging depth | 4410 mm | 12. Maximum vertical wall digging depth | 4100 mm |
| 13. Maximum excavation depth | 7810 mm | 13. Maximum excavation depth | 7140 mm |
| 9. Maximum cut height | 11080 mm | 9. Maximum cut height | 13030 mm |
| 10. Maximum loading height | 7880 mm | 10. Maximum loading height | 9080 mm |
| 11. Maximum radius along ground level | 11870 mm | 11. Maximum radius along ground level | 13820 mm |
| 1. Unit load-transfer length | 12130 mm | 1. Unit load-transfer length | 14770 mm |
| 3. Unit load-transfer height | 3730 mm | 3. Unit load-transfer height | 4570 mm |