- Home/
- Comparison/
- Hydraulic Shovel/
- Terex TXC520LC-2 vs. Link-Belt 4300 Quantum
Terex TXC520LC-2 vs. Link-Belt 4300 Quantum
21 reasons to buy Terex TXC520LC-2:
Sizes
| Width to outside of caterpillar track | 3900 mm and 3400 mm | 13 % more or 500 mm |
| Clearance | 770 mm and 450 mm | 42 % more or 320 mm |
| Counterweight ground clearance | 1460 mm and 1190 mm | 18 % more or 270 mm |
Shovel
| Bucket initial volume | 3.2 m3 and 1.1 m3 | 66 % more or 2.1 m3 |
| Maximum bucket volume | 3.2 m3 and 2.1 m3 | 34 % more or 1.1 m3 |
Operation
| Fuel Capacity | 620 l. and 580 l. | 6 % more or 40 l. |
| Hydraulic system fluid volume | 500 l. and 320 l. | 36 % more or 180 l. |
| Engine oil volume | 44 l. and 34 l. | 23 % more or 10 l. |
| Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Motor
| Maximum torque | 1541.6 Nm and 1220.2 Nm | 21 % more or 321.4 Nm |
| Effective power | 244.6 kW and 179 kW | 27 % more or 65.6 kW |
| Power measured at | 1800 rev / min and 1700 rev / min | 6 % more or 100 rev |
| Displacement | 11 l. and 10.8 l. | 2 % more or 0.2 l. |
Carrier
| Track shoes number per side | 53 and 50 | 6 % more or 3 |
| Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 3
| Maximum radius along ground level | 11870 mm and 11680 mm | 2 % more or 190 mm |
| Maximum loading height | 7880 mm and 7460 mm | 5 % more or 420 mm |
Booms/sections features 2
| Maximum radius along ground level | 12430 mm and 10940 mm | 12 % more or 1490 mm |
| Maximum loading height | 8040 mm and 7190 mm | 11 % more or 850 mm |
| Maximum excavation depth | 8440 mm and 7390 mm | 12 % more or 1050 mm |
Booms/sections features 1
| Maximum radius along ground level | 10460 mm and 10370 mm | 1 % more or 90 mm |
12 reasons to buy Link-Belt 4300 Quantum:
Swing device
| Rotation speed | 10.3 rev / min and 8.8 rev / min | 15 % more or 1.5 rev |
Operation
| Cooling system fluid volume | 56.8 l. and 40 l. | 30 % more or 16.8 l. |
| Boom reach drive mechanism fluid volume | 12.5 l. and 4 l. | 68 % more or 8.5 l. |
| Hydraulic system overflow valve pressure | 31853.7 kPa and 31371.1 kPa | 2 % more or 482.6 kPa |
| Hydraulic pump flow rate | 537.5 l/min and 710 l/min | 24 % less or 172.5 l/min |
Carrier
| Specific ground pressure | 48.3 kPa and 86.2 kPa | 44 % less or 37.9 kPa |
Booms/sections features 3
| Maximum excavation depth | 8190 mm and 7810 mm | 5 % more or 380 mm |
| Maximum vertical wall digging depth | 7110 mm and 4410 mm | 38 % more or 2700 mm |
Booms/sections features 2
| Maximum vertical wall digging depth | 6330 mm and 4965 mm | 22 % more or 1365 mm |
Booms/sections features 1
| Maximum vertical wall digging depth | 5600 mm and 1190 mm | 79 % more or 4410 mm |
| Maximum excavation depth | 6800 mm and 6770 mm | 0 % more or 30 mm |
| Maximum loading height | 6910 mm and 6720 mm | 3 % more or 190 mm |
Neutral reasons:
Sizes
| Caterpillar track length on ground level | 4470 mm and 3910 mm |
| Height to cab upper part | 3350 mm and 3110 mm |
| Rear platform swing radius | 3700 mm and 3250 mm |
Operation
| Working weight | 51392 kg and 33370.8 kg |
| Operating voltage | 24 V and 24 V |
Motor
| Torque measured at | 1300 rev / min and 1300 rev / min |
| Aspiration | turbocharging, with subsequent cooling of charging air by oncoming air flow and turbocharging |
| Cylinders number | 6 and 6 |
| Manufacturer | Doosan and Cummins |
| Model | DV11 and MII-C265 |
Carrier
| Shoe dimensions | 600 mm and 800 mm |
| Rolling bearings number on either side | 9 and 9 |
| Maximum travel speed | 5 km/h and 5 km/h |
Booms/sections features 3
| Maximum cut height | 11080 mm and 10550 mm |
| Unit load-transfer height | 3730 mm and 3840 mm |
| Unit load-transfer length | 12130 mm and 10970 mm |
Booms/sections features 2
| Maximum cut height | 11230 mm and 10280 mm |
Booms/sections features 1
| Unit load-transfer height | 4200 mm and 3550 mm |
| Unit load-transfer length | 11430 mm and 10970 mm |
| Maximum cut height | 9600 mm and 9980 mm |
Images
Sizes
| 7. Height to cab upper part | 3350 mm | 7. Height to cab upper part | 3110 mm |
| 8. Rear platform swing radius | 3700 mm | 8. Rear platform swing radius | 3250 mm |
| 15. Counterweight ground clearance | 1460 mm | 15. Counterweight ground clearance | 1190 mm |
| 2. Width to outside of caterpillar track | 3900 mm | 2. Width to outside of caterpillar track | 3400 mm |
| 4. Caterpillar track length on ground level | 4470 mm | 4. Caterpillar track length on ground level | 3910 mm |
| 5. Clearance | 770 mm | 5. Clearance | 450 mm |
Carrier
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
| 10. Maximum loading height | 8040 mm | 10. Maximum loading height | 6910 mm |
| 11. Maximum radius along ground level | 12430 mm | 11. Maximum radius along ground level | 10370 mm |
| 12. Maximum vertical wall digging depth | 4965 mm | 12. Maximum vertical wall digging depth | 5600 mm |
| 13. Maximum excavation depth | 8440 mm | 13. Maximum excavation depth | 6800 mm |
| 1. Unit load-transfer length | 12130 mm | 1. Unit load-transfer length | 10870 mm |
| 3. Unit load-transfer height | 3730 mm | 3. Unit load-transfer height | 3330 mm |
| 9. Maximum cut height | 11230 mm | 9. Maximum cut height | 10280 mm |