- Home/
- Comparison/
- Hydraulic Shovel/
- Volvo EC340 vs. Volvo EC290C
Volvo EC340 vs. Volvo EC290C
14 reasons to buy Volvo EC340:
Sizes
| Counterweight ground clearance | 1150 mm and 1145 mm | 0 % more or 5 mm |
Shovel
| Bucket initial volume | 1.8 m3 and 1.5 m3 | 17 % more or 0.3 m3 |
Operation
| Cooling system fluid volume | 58 l. and 36 l. | 38 % more or 22 l. |
| Hydraulic system fluid volume | 470 l. and 400 l. | 15 % more or 70 l. |
| Engine oil volume | 34.5 l. and 30 l. | 13 % more or 4.5 l. |
| Boom reach drive mechanism fluid volume | 24 l. and 11 l. | 54 % more or 13 l. |
| Fuel Capacity | 720 l. and 470 l. | 35 % more or 250 l. |
Motor
| Full power | 190 kW and 152.9 kW | 20 % more or 37.1 kW |
| Effective power | 182 kW and 143.2 kW | 21 % more or 38.8 kW |
| Displacement | 9.6 l. and 7.1 l. | 26 % more or 2.5 l. |
Carrier
| Track shoes number per side | 53 and 50 | 6 % more or 3 |
Booms/sections features 3
| Maximum loading height | 7700 mm and 7340 mm | 5 % more or 360 mm |
Booms/sections features 2
| Maximum loading height | 7500 mm and 7050 mm | 6 % more or 450 mm |
Booms/sections features 1
| Maximum loading height | 7000 mm and 6690 mm | 4 % more or 310 mm |
20 reasons to buy Volvo EC290C:
Swing device
| Rotation speed | 10.2 rev / min and 8.6 rev / min | 16 % more or 1.6 rev |
Sizes
| Width to outside of caterpillar track | 3390 mm and 3000 mm | 12 % more or 390 mm |
Operation
| Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
| Hydraulic pump flow rate | 499.7 l/min and 506 l/min | 1 % less or 6.3 l/min |
Motor
| Power measured at | 1800 rev / min and 1700 rev / min | 6 % more or 100 rev |
Carrier
| Specific ground pressure | 42.6 kPa and 63.6 kPa | 33 % less or 21.0 kPa |
| Maximum travel speed | 5.1 km/h and 5 km/h | 2 % more or 0.1 km/h |
Booms/sections features 4
| Maximum excavation depth | 14770 mm and 6800 mm | 54 % more or 7970 mm |
| Maximum radius along ground level | 18490 mm and 10600 mm | 43 % more or 7890 mm |
| Maximum loading height | 12580 mm and 7600 mm | 40 % more or 4980 mm |
| Maximum vertical wall digging depth | 13520 mm and 4300 mm | 68 % more or 9220 mm |
Booms/sections features 3
| Maximum excavation depth | 7980 mm and 7200 mm | 10 % more or 780 mm |
| Maximum radius along ground level | 11110 mm and 10900 mm | 2 % more or 210 mm |
| Maximum vertical wall digging depth | 6590 mm and 5100 mm | 23 % more or 1490 mm |
Booms/sections features 2
| Maximum vertical wall digging depth | 6200 mm and 4800 mm | 23 % more or 1400 mm |
| Maximum excavation depth | 7320 mm and 6600 mm | 10 % more or 720 mm |
| Maximum radius along ground level | 10490 mm and 10400 mm | 1 % more or 90 mm |
Booms/sections features 1
| Maximum vertical wall digging depth | 5440 mm and 3700 mm | 32 % more or 1740 mm |
| Maximum excavation depth | 6830 mm and 6100 mm | 11 % more or 730 mm |
| Maximum radius along ground level | 9950 mm and 9900 mm | 1 % more or 50 mm |
Neutral reasons:
Sizes
| Height to cab upper part | 3130 mm and 3030 mm |
| Clearance | 480 mm and 480 mm |
| Rear platform swing radius | 3300 mm and 3000 mm |
| Caterpillar track length on ground level | 4200 mm and 4015 mm |
Operation
| Operating voltage | 24 V and 24 V |
| Working weight | 35250 kg and 30100 kg |
Motor
| Manufacturer | Volvo and Volvo |
| Model | TD 103 KAE and D7E EAE3 |
| Aspiration | Turbocharging with intercooler and Turbocharging with intercooler |
| Cylinders number | 6 and 6 |
Carrier
| Track width | 2400 mm and 2590 mm |
| Shoe dimensions | 600 mm and 800 mm |
| Support rollers number on either side | 2 and 2 |
| Rolling bearings number on either side | 9 and 9 |
Booms/sections features 4
| Unit load-transfer height | 3230 mm and 3340 mm |
| Unit load-transfer length | 11300 mm and 14620 mm |
| Maximum cut height | 11100 mm and 14920 mm |
Booms/sections features 3
| Unit load-transfer height | 3540 mm and 3540 mm |
| Unit load-transfer length | 10500 mm and 10450 mm |
| Maximum cut height | 11300 mm and 10320 mm |
Booms/sections features 2
| Unit load-transfer height | 3480 mm and 3290 mm |
| Unit load-transfer length | 10500 mm and 10420 mm |
| Maximum cut height | 11100 mm and 10040 mm |
Booms/sections features 1
| Unit load-transfer height | 3250 mm and 3430 mm |
| Unit load-transfer length | 10500 mm and 10500 mm |
| Maximum cut height | 10500 mm and 9620 mm |
Images
Sizes
| 7. Height to cab upper part | 3130 mm | 7. Height to cab upper part | 3030 mm |
| 8. Rear platform swing radius | 3300 mm | 8. Rear platform swing radius | 3000 mm |
| 15. Counterweight ground clearance | 1150 mm | 15. Counterweight ground clearance | 1145 mm |
| 2. Width to outside of caterpillar track | 3000 mm | 2. Width to outside of caterpillar track | 3390 mm |
| 4. Caterpillar track length on ground level | 4200 mm | 4. Caterpillar track length on ground level | 4015 mm |
| 5. Clearance | 480 mm | 5. Clearance | 480 mm |
Carrier
| 6. Track width | 2400 mm | 6. Track width | 2590 mm |
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
| 10. Maximum loading height | 8300 mm | 10. Maximum loading height | 7340 mm |
| 11. Maximum radius along ground level | 11700 mm | 11. Maximum radius along ground level | 11110 mm |
| 13. Maximum excavation depth | 7900 mm | 13. Maximum excavation depth | 7980 mm |
| 12. Maximum vertical wall digging depth | 3700 mm | 12. Maximum vertical wall digging depth | 6590 mm |
| 1. Unit load-transfer length | 10500 mm | 1. Unit load-transfer length | 14620 mm |
| 3. Unit load-transfer height | 3480 mm | 3. Unit load-transfer height | 3340 mm |
| 9. Maximum cut height | 11100 mm | 9. Maximum cut height | 14920 mm |