- Home/
- Comparison/
- Hydraulic Shovel/
- Volvo EC460BLC vs. Hitachi EX300LC-3
Volvo EC460BLC vs. Hitachi EX300LC-3
20 reasons to buy Volvo EC460BLC:
Sizes
| Counterweight ground clearance | 1275 mm and 1170 mm | 8 % more or 105 mm |
| Clearance | 550 mm and 500 mm | 9 % more or 50 mm |
Shovel
| Bucket initial volume | 2.1 m3 and 1.4 m3 | 33 % more or 0.7 m3 |
| Maximum bucket volume | 3.8 m3 and 1.9 m3 | 50 % more or 1.9 m3 |
Operation
| Fuel Capacity | 685 l. and 510 l. | 26 % more or 175 l. |
| Hydraulic system fluid volume | 525 l. and 310 l. | 41 % more or 215 l. |
| Cooling system fluid volume | 65.4 l. and 33.5 l. | 49 % more or 31.9 l. |
| Engine oil volume | 39 l. and 35 l. | 10 % more or 4 l. |
| Generator current strength | 55 amperes and 30 amperes | 45 % more or 25 amperes |
Motor
| Effective power | 170 kW and 155.1 kW | 9 % more or 14.9 kW |
| Displacement | 12.4 l. and 9.8 l. | 21 % more or 2.6 l. |
| Maximum torque | 1549 Nm and 834 Nm | 46 % more or 715 Nm |
Carrier
| Track shoes number per side | 52 and 50 | 4 % more or 2 |
Booms/sections features 3
| Maximum radius along ground level | 11780 mm and 11680 mm | 1 % more or 100 mm |
| Maximum loading height | 7650 mm and 7490 mm | 2 % more or 160 mm |
Booms/sections features 2
| Maximum radius along ground level | 11070 mm and 10900 mm | 2 % more or 170 mm |
| Maximum loading height | 7440 mm and 7120 mm | 4 % more or 320 mm |
Booms/sections features 1
| Maximum radius along ground level | 10660 mm and 10360 mm | 3 % more or 300 mm |
| Maximum loading height | 6980 mm and 6810 mm | 2 % more or 170 mm |
| Maximum vertical wall digging depth | 5800 mm and 5610 mm | 3 % more or 190 mm |
14 reasons to buy Hitachi EX300LC-3:
Swing device
| Rotation speed | 12 rev / min and 8.5 rev / min | 29 % more or 3.5 rev |
Sizes
| Width to outside of caterpillar track | 3390 mm and 3340 mm | 1 % more or 50 mm |
Shovel
| Bucket minimum volume | 1.2 m3 and 1.7 m3 | 29 % less or 0.5 m3 |
Operation
| Boom reach drive mechanism fluid volume | 17 l. and 6 l. | 65 % more or 11 l. |
| Hydraulic system overflow valve pressure | 34335.9 kPa and 34300 kPa | 0 % more or 35.9 kPa |
| Hydraulic pump flow rate | 546 l/min and 690 l/min | 21 % less or 144 l/min |
Motor
| Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Carrier
| Specific ground pressure | 44.1 kPa and 77.5 kPa | 43 % less or 33.4 kPa |
| Maximum travel speed | 5.5 km/h and 4.8 km/h | 13 % more or 0.7 km/h |
Booms/sections features 3
| Maximum excavation depth | 8180 mm and 7700 mm | 6 % more or 480 mm |
| Maximum vertical wall digging depth | 7360 mm and 6840 mm | 7 % more or 520 mm |
Booms/sections features 2
| Maximum vertical wall digging depth | 6480 mm and 6150 mm | 5 % more or 330 mm |
| Maximum excavation depth | 7380 mm and 6900 mm | 7 % more or 480 mm |
Booms/sections features 1
| Maximum excavation depth | 6840 mm and 6400 mm | 6 % more or 440 mm |
Neutral reasons:
Sizes
| Rear platform swing radius | 3730 mm and 3300 mm |
| Caterpillar track length on ground level | 4370 mm and 4010 mm |
| Height to cab upper part | 3250 mm and 3010 mm |
Operation
| Working weight | 44500 kg and 30889.6 kg |
Motor
| Manufacturer | Volvo and Isuzu |
| Model | D12C and A-6SD1TQA |
| Torque measured at | 1400 rev / min and 1400 rev / min |
| Cylinders number | 6 and 6 |
| Aspiration | turbocharging and turbocharging |
Carrier
| Shoe dimensions | 600 mm and 800 mm |
| Support rollers number on either side | 2 and 2 |
| Rolling bearings number on either side | 9 and 9 |
| Track width | 2740 mm and 2590 mm |
Booms/sections features 3
| Unit load-transfer height | 3650 mm and 3490 mm |
| Unit load-transfer length | 12070 mm and 11010 mm |
| Maximum cut height | 10970 mm and 10600 mm |
Booms/sections features 2
| Unit load-transfer height | 3630 mm and 3200 mm |
| Unit load-transfer length | 12060 mm and 10940 mm |
| Maximum cut height | 10820 mm and 10220 mm |
Booms/sections features 1
| Unit load-transfer height | 3770 mm and 3410 mm |
| Unit load-transfer length | 11560 mm and 11060 mm |
| Maximum cut height | 10580 mm and 9850 mm |
Images
Sizes
| 4. Caterpillar track length on ground level | 4370 mm | 4. Caterpillar track length on ground level | 4010 mm |
| 5. Clearance | 550 mm | 5. Clearance | 500 mm |
| 2. Width to outside of caterpillar track | 3340 mm | 2. Width to outside of caterpillar track | 3390 mm |
| 7. Height to cab upper part | 3250 mm | 7. Height to cab upper part | 3010 mm |
| 8. Rear platform swing radius | 3730 mm | 8. Rear platform swing radius | 3300 mm |
| 15. Counterweight ground clearance | 1275 mm | 15. Counterweight ground clearance | 1170 mm |
Carrier
| 6. Track width | 2740 mm | 6. Track width | 2590 mm |
| 14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
| 13. Maximum excavation depth | 9150 mm | 13. Maximum excavation depth | 7380 mm |
| 1. Unit load-transfer length | 11940 mm | 1. Unit load-transfer length | 11010 mm |
| 12. Maximum vertical wall digging depth | 6840 mm | 12. Maximum vertical wall digging depth | 7360 mm |
| 3. Unit load-transfer height | 4650 mm | 3. Unit load-transfer height | 3490 mm |
| 9. Maximum cut height | 11090 mm | 9. Maximum cut height | 10600 mm |
| 10. Maximum loading height | 7870 mm | 10. Maximum loading height | 7490 mm |
| 11. Maximum radius along ground level | 13020 mm | 11. Maximum radius along ground level | 11680 mm |