Caterpillar IT28G vs. John Deere TC62H

16 reasons to buy Caterpillar IT28G:

Sizes

Hook height at maximum lifting in unfolded state	7185 mm and 7033 mm	2 % more or 152 mm
Clearance	407 mm and 406 mm	0 % more or 1 mm
Unloading ground clearance at maximum lifting	2911 mm and 2907 mm	0 % more or 4 mm
Maximum lifting height	3843 mm and 3821 mm	1 % more or 22 mm

Shovel

Breakout power

104.3 kN and 120.5 kN

13 % less or 16.2 kN

Operation

Generator current strength	80 amperes and 55 amperes	31 % more or 25 amperes
Turn radius	5070 mm and 5187 mm	2 % less or 117 mm
Static bucket tipping load	9034 kg and 9755 kg	7 % less or 721 kg
Cooling system fluid volume	42 l. and 22 l.	48 % more or 20 l.
Transmission fluid volume	34.5 l. and 27 l.	22 % more or 7.5 l.
Rear differential fluid volume	25 l. and 21 l.	16 % more or 4 l.
Hydraulic system fluid volume	125 l. and 117 l.	6 % more or 8 l.

Motor

Power measured at

2300 rev / min and 2200 rev / min

4 % more or 100 rev

Hydraulic system

Unloading time	1.4 sec and 1.7 sec	18 % less or 0.3 sec
Lowering time	2.8 sec and 3 sec	7 % less or 0.2 sec

Gear box

Maximum reverse gear

26 km/h and 23.9 km/h

8 % more or 2.1 km/h

17 reasons to buy John Deere TC62H:

Sizes

Hook radius at maximum lifting in folded state	2299 mm and 1608 mm	30 % more or 691 mm
Hook radius at maximum lifting in unfolded state	3688 mm and 2791 mm	24 % more or 897 mm
Radius at maximum height and unloading	1278 mm and 1014 mm	21 % more or 264 mm
Fork tines length	1220 mm and 1200 mm	2 % more or 20 mm
Hook height at maximum lifting in folded state	5728 mm and 5578 mm	3 % more or 150 mm

Shovel

Bucket capacity with top	2.7 m3 and 2 m3	26 % more or 0.7 m3
Brimmed bucket capacity	2.3 m3 and 1.7 m3	26 % more or 0.6 m3

Operation

Manipulator static tipping load	5005.8 kg and 5355 kg	7 % less or 349.2 kg
Fuel Capacity	265 l. and 225 l.	15 % more or 40 l.
Engine oil volume	20 l. and 16 l.	20 % more or 4 l.
Front differential fluid volume	27 l. and 26 l.	4 % more or 1 l.

Motor

Full power	128.3 kW and 116.3 kW	9 % more or 12.0 kW
Effective power	119 kW and 108.1 kW	9 % more or 10.9 kW
Displacement	6.8 l. and 6 l.	12 % more or 0.8 l.

Hydraulic system

Lifting time	5.8 sec and 6.1 sec	5 % less or 0.3 sec
Pump bandwidth	208.2 l/min and 104 l/min	50 % more or 104.2 l/min

Gear box

Maximum forward speed

39.5 km/h and 38 km/h

4 % more or 1.5 km/h

Neutral reasons:

Sizes

Height to cab upper part	3268 mm and 3300 mm
Wheelbase	2900 mm and 3003 mm
Hinge axis maximum height	3980 mm and 4005 mm
Length with bucket on ground level	7318 mm and 7671 mm
Length with forks on ground level	7557 mm and 7889 mm

Operation

Operating voltage	24 V and 24 V
Tyre size	20.5R25 L3 XHA and 20.5-25
Working weight	12640 kg and 13849 kg

Motor

Model

3116T and 6068H

Hydraulic system

Overflow valve pressure

20700 kPa and 24850 kPa

Gear box

Forward gears number	4 and 4
Reverse gears number	3 and 3

Images

Sizes

1. Length with bucket on ground level	7318 mm	1. Length with bucket on ground level	7671 mm
3. Height to cab upper part	3268 mm	3. Height to cab upper part	3300 mm
4. Wheelbase	2900 mm	4. Wheelbase	3003 mm
5. Clearance	407 mm	5. Clearance	406 mm
6. Hinge axis maximum height	3980 mm	6. Hinge axis maximum height	4005 mm
7. Unloading ground clearance at maximum lifting	2911 mm	7. Unloading ground clearance at maximum lifting	2907 mm
9. Fork tines length	1200 mm	9. Fork tines length	1220 mm
10. Length with forks on ground level	7557 mm	10. Length with forks on ground level	7889 mm
11. Maximum lifting height	3843 mm	11. Maximum lifting height	3821 mm
12. Hook height at maximum lifting in folded state	5578 mm	12. Hook height at maximum lifting in folded state	5728 mm
13. Hook height at maximum lifting in unfolded state	7185 mm	13. Hook height at maximum lifting in unfolded state	7033 mm
14. Hook radius at maximum lifting in folded state	1608 mm	14. Hook radius at maximum lifting in folded state	2299 mm
15. Hook radius at maximum lifting in unfolded state	2791 mm	15. Hook radius at maximum lifting in unfolded state	3688 mm