vs.

      Caterpillar IT38H vs. JCB 411ZX

      21 reasons to buy Caterpillar IT38H:

      Sizes

      Maximum lifting height 3545 mm and 3021 mm 15 % more or 524 mm
      Unloading ground clearance at maximum lifting 2805 mm and 2512 mm 10 % more or 293 mm
      Radius at maximum height and unloading 1152 mm and 634 mm 45 % more or 518 mm
      Fork tines length 1524 mm and 1200 mm 21 % more or 324 mm

      Operation

      Rear differential fluid volume 53 l. and 10.5 l. 80 % more or 42.5 l.
      Hydraulic system fluid volume 89 l. and 85.2 l. 4 % more or 3.8 l.
      Fuel Capacity 247 l. and 100 l. 60 % more or 147 l.
      Cooling system fluid volume 36 l. and 15.5 l. 57 % more or 20.5 l.
      Engine oil volume 17.4 l. and 9.4 l. 46 % more or 8.0 l.
      Front differential fluid volume 57 l. and 9.5 l. 83 % more or 47.5 l.

      Motor

      Displacement 6.6 l. and 4.4 l. 33 % more or 2.2 l.
      Full power 147 kW and 55.9 kW 62 % more or 91.1 kW
      Effective power 133 kW and 50 kW 62 % more or 83 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Maximum torque 840.6 Nm and 302.3 Nm 64 % more or 538.3 Nm

      Hydraulic system

      Pump bandwidth 295 l/min and 66 l/min 78 % more or 229 l/min
      Lowering time 2.7 sec and 3.2 sec 16 % less or 0.5 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 43.2 km/h and 20 km/h 54 % more or 23.2 km/h
      Maximum reverse gear 25.5 km/h and 20 km/h 22 % more or 5.5 km/h

      6 reasons to buy JCB 411ZX:

      Sizes

      Clearance 410 mm and 397 mm 3 % more or 13 mm

      Operation

      Turn radius 3605.8 mm and 6068 mm 41 % less or 2462.2 mm
      Generator current strength 75 amperes and 65 amperes 13 % more or 10 amperes
      Static bucket tipping load 3089 kg and 10849 kg 72 % less or 7760 kg
      Transmission fluid volume 85 l. and 43 l. 49 % more or 42 l.
      Static tipping forks load 4170 kg and 8866 kg 53 % less or 4696 kg

      Neutral reasons:

      Sizes

      Wheelbase 3020 mm and 2000 mm
      Hinge axis maximum height 3933 mm and 3165 mm
      Length with bucket on ground level 7543 mm and 5070 mm
      Between tyres width 2674 mm and 1900 mm
      Height to cab upper part 3356 mm and 2660 mm

      Operation

      Working weight 16004 kg and 5250 kg
      Operating voltage 24 V and 12 V
      Rear axle oscillating 12 degrees and 9 degrees

      Motor

      Manufacturer Caterpillar and JCB
      Model 6.6 Acert and 1104C-44
      Torque measured at 1400 rev / min and 1400 rev / min

      Hydraulic system

      Lifting time 5 sec and 5 sec
      Type of pump piston pump and gear type pump
      Overflow valve pressure 6894.8 kPa and 22001.2 kPa

      Images

      Sizes

      1. Length with bucket on ground level 7543 mm 1. Length with bucket on ground level 5070 mm
      2. Between tyres width 2674 mm 2. Between tyres width 1900 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 2660 mm
      4. Wheelbase 3020 mm 4. Wheelbase 2000 mm
      5. Clearance 397 mm 5. Clearance 410 mm
      6. Hinge axis maximum height 3933 mm 6. Hinge axis maximum height 3165 mm
      7. Unloading ground clearance at maximum lifting 2805 mm 7. Unloading ground clearance at maximum lifting 2512 mm
      9. Fork tines length 1524 mm 9. Fork tines length 1200 mm
      11. Maximum lifting height 3545 mm 11. Maximum lifting height 3021 mm