vs.

      Caterpillar IT38H vs. John Deere 444H

      24 reasons to buy Caterpillar IT38H:

      Sizes

      Radius at maximum height and unloading 1152 mm and 1095 mm 5 % more or 57 mm
      Clearance 397 mm and 355 mm 11 % more or 42 mm
      Unloading ground clearance at maximum lifting 2805 mm and 2638 mm 6 % more or 167 mm
      Fork tines length 1524 mm and 1220 mm 20 % more or 304 mm
      Maximum lifting height 3545 mm and 3406 mm 4 % more or 139 mm
      Hook height at maximum lifting in folded state 5597 mm and 5375 mm 4 % more or 222 mm
      Hook height at maximum lifting in unfolded state 6725 mm and 6714 mm 0 % more or 11 mm
      Hook radius at maximum lifting in folded state 2445 mm and 2178 mm 11 % more or 267 mm
      Hook radius at maximum lifting in unfolded state 3580 mm and 3534 mm 1 % more or 46 mm

      Shovel

      Bucket capacity with top 3 m3 and 1.9 m3 37 % more or 1.1 m3
      Brimmed bucket capacity 2.3 m3 and 1.6 m3 30 % more or 0.7 m3

      Operation

      Fuel Capacity 247 l. and 180 l. 27 % more or 67 l.
      Cooling system fluid volume 36 l. and 19 l. 47 % more or 17 l.
      Engine oil volume 17.4 l. and 12.5 l. 28 % more or 4.9 l.
      Transmission fluid volume 43 l. and 12.5 l. 71 % more or 30.5 l.
      Front differential fluid volume 57 l. and 15 l. 74 % more or 42 l.
      Rear differential fluid volume 53 l. and 15 l. 72 % more or 38 l.
      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Maximum torque 840.6 Nm and 441 Nm 48 % more or 399.6 Nm
      Displacement 6.6 l. and 4.5 l. 32 % more or 2.1 l.
      Full power 147 kW and 86 kW 41 % more or 61 kW
      Effective power 133 kW and 82 kW 38 % more or 51 kW

      Hydraulic system

      Pump bandwidth 295 l/min and 136.3 l/min 54 % more or 158.7 l/min

      Gear box

      Maximum forward speed 43.2 km/h and 40 km/h 7 % more or 3.2 km/h

      10 reasons to buy John Deere 444H:

      Shovel

      Breakout power 73.8 kN and 126 kN 41 % less or 52.2 kN

      Operation

      Static bucket tipping load 7267 kg and 10849 kg 33 % less or 3582 kg
      Static tipping forks load 4364 kg and 8866 kg 51 % less or 4502 kg
      Manipulator static tipping load 3241 kg and 5261 kg 38 % less or 2020 kg
      Hydraulic system fluid volume 106 l. and 89 l. 16 % more or 17 l.
      Turn radius 4703 mm and 6068 mm 22 % less or 1365 mm

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Unloading time 1.1 sec and 2 sec 45 % less or 0.9 sec
      Lowering time 2.6 sec and 2.7 sec 4 % less or 0.1 sec

      Gear box

      Maximum reverse gear 26.3 km/h and 25.5 km/h 3 % more or 0.8 km/h

      Neutral reasons:

      Sizes

      Wheelbase 3020 mm and 2750 mm
      Length with bucket on ground level 7543 mm and 6730 mm
      Length with forks on ground level 8345 mm and 5785 mm
      Between tyres width 2674 mm and 2330 mm
      Height to cab upper part 3356 mm and 3125 mm
      Hinge axis maximum height 3933 mm and 3605 mm

      Operation

      Rear axle oscillating 12 degrees and 24 degrees
      Tyre size 20.5-R25 and 17.5-25
      Working weight 16004 kg and 9733 kg
      Operating voltage 24 V and 24 V

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Manufacturer Caterpillar and John Deere
      Model 6.6 Acert and 4045T

      Hydraulic system

      Type of pump piston pump and piston pump
      Overflow valve pressure 6894.8 kPa and 24850 kPa
      Lifting time 5 sec and 5 sec

      Gear box

      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 7543 mm 1. Length with bucket on ground level 6730 mm
      2. Between tyres width 2674 mm 2. Between tyres width 2330 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 3125 mm
      4. Wheelbase 3020 mm 4. Wheelbase 2750 mm
      5. Clearance 397 mm 5. Clearance 355 mm
      6. Hinge axis maximum height 3933 mm 6. Hinge axis maximum height 3605 mm
      7. Unloading ground clearance at maximum lifting 2805 mm 7. Unloading ground clearance at maximum lifting 2638 mm
      9. Fork tines length 1524 mm 9. Fork tines length 1220 mm
      10. Length with forks on ground level 8345 mm 10. Length with forks on ground level 5785 mm
      11. Maximum lifting height 3545 mm 11. Maximum lifting height 3406 mm
      12. Hook height at maximum lifting in folded state 5597 mm 12. Hook height at maximum lifting in folded state 5375 mm
      13. Hook height at maximum lifting in unfolded state 6725 mm 13. Hook height at maximum lifting in unfolded state 6714 mm
      14. Hook radius at maximum lifting in folded state 2445 mm 14. Hook radius at maximum lifting in folded state 2178 mm
      15. Hook radius at maximum lifting in unfolded state 3580 mm 15. Hook radius at maximum lifting in unfolded state 3534 mm