- Home/
- Comparison/
- Attached Equipment/
- JCB 406 vs. Komatsu WA250PT-5
JCB 406 vs. Komatsu WA250PT-5
7 reasons to buy JCB 406:
Shovel
Breakout power | 41.9 kN and 109 kN | 62 % less or 67.1 kN |
Operation
Static bucket tipping load | 4290.1 kg and 8800 kg | 51 % less or 4509.9 kg |
Hydraulic system fluid volume | 70 l. and 67 l. | 4 % more or 3 l. |
Turn radius | 2720 mm and 4950 mm | 45 % less or 2230 mm |
Generator current strength | 80 amperes and 60 amperes | 25 % more or 20 amperes |
Hydraulic system
Lifting time | 4.9 sec and 6.3 sec | 22 % less or 1.4 sec |
Lowering time | 3.1 sec and 3.3 sec | 6 % less or 0.2 sec |
16 reasons to buy Komatsu WA250PT-5:
Sizes
Maximum lifting height | 3620 mm and 3012 mm | 17 % more or 608 mm |
Clearance | 465 mm and 330 mm | 29 % more or 135 mm |
Unloading ground clearance at maximum lifting | 2905 mm and 2489 mm | 14 % more or 416 mm |
Radius at maximum height and unloading | 5195 mm and 764 mm | 85 % more or 4431 mm |
Operation
Fuel Capacity | 184 l. and 79.5 l. | 57 % more or 104.5 l. |
Engine oil volume | 19.5 l. and 11.7 l. | 40 % more or 7.8 l. |
Front differential fluid volume | 18 l. and 3.8 l. | 79 % more or 14.2 l. |
Rear differential fluid volume | 18 l. and 3.8 l. | 79 % more or 14.2 l. |
Motor
Displacement | 6 l. and 3.1 l. | 48 % more or 2.9 l. |
Full power | 104 kW and 44 kW | 58 % more or 60 kW |
Effective power | 100 kW and 41.8 kW | 58 % more or 58.2 kW |
Hydraulic system
Unloading time | 1.7 sec and 3.5 sec | 51 % less or 1.8 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 38 km/h and 20.1 km/h | 47 % more or 17.9 km/h |
Maximum reverse gear | 38 km/h and 20.1 km/h | 47 % more or 17.9 km/h |
Neutral reasons:
Sizes
Between tyres width | 1761 mm and 2470 mm |
Height to cab upper part | 2500 mm and 3251 mm |
Length with bucket on ground level | 5133 mm and 7310 mm |
Wheelbase | 2100 mm and 2900 mm |
Operation
Rear axle oscillating | 10 degrees and 30 degrees |
Tyre size | 12.5/80 R18 SGL and 20.5/25 (L2) |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | Deutz and Komatsu |
Model | F4L2011 and SAA6D102E-2 |
Aspiration | natural aspiration and Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Hydraulic system
Type of pump | gear type pump and Double-acting piston type |
Overflow valve pressure | 22994 kPa and 20600 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Hydrostatic, 1 pump, 2 electric motors with the speed range selection |
Images
Sizes
4. Wheelbase | 2100 mm | 4. Wheelbase | 2900 mm |
5. Clearance | 330 mm | 5. Clearance | 465 mm |
7. Unloading ground clearance at maximum lifting | 2489 mm | 7. Unloading ground clearance at maximum lifting | 2905 mm |
11. Maximum lifting height | 3012 mm | 11. Maximum lifting height | 3620 mm |
1. Length with bucket on ground level | 5133 mm | 1. Length with bucket on ground level | 7310 mm |
2. Between tyres width | 1761 mm | 2. Between tyres width | 2470 mm |
3. Height to cab upper part | 2500 mm | 3. Height to cab upper part | 3251 mm |