- Home/
- Comparison/
- Attached Equipment/
- JCB 406 vs. Michigan L90-I
JCB 406 vs. Michigan L90-I
8 reasons to buy JCB 406:
Shovel
Breakout power | 41.9 kN and 119.9 kN | 65 % less or 78.0 kN |
Operation
Turn radius | 2720 mm and 5910 mm | 54 % less or 3190 mm |
Generator current strength | 80 amperes and 45 amperes | 44 % more or 35 amperes |
Static bucket tipping load | 4290.1 kg and 9290 kg | 54 % less or 4999.9 kg |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Torque measured at | 1700 rev / min and 1500 rev / min | 12 % more or 200 rev |
Hydraulic system
Lifting time | 4.9 sec and 6.4 sec | 23 % less or 1.5 sec |
Lowering time | 3.1 sec and 3.5 sec | 11 % less or 0.4 sec |
19 reasons to buy Michigan L90-I:
Sizes
Fork tines length | 1225 mm and 1200 mm | 2 % more or 25 mm |
Maximum lifting height | 3675 mm and 3012 mm | 18 % more or 663 mm |
Radius at maximum height and unloading | 1050 mm and 764 mm | 27 % more or 286 mm |
Clearance | 400 mm and 330 mm | 17 % more or 70 mm |
Unloading ground clearance at maximum lifting | 2810 mm and 2489 mm | 11 % more or 321 mm |
Operation
Fuel Capacity | 200 l. and 79.5 l. | 60 % more or 120.5 l. |
Engine oil volume | 15 l. and 11.7 l. | 22 % more or 3.3 l. |
Front differential fluid volume | 27.5 l. and 3.8 l. | 86 % more or 23.7 l. |
Rear differential fluid volume | 27.5 l. and 3.8 l. | 86 % more or 23.7 l. |
Hydraulic system fluid volume | 193 l. and 70 l. | 64 % more or 123 l. |
Motor
Full power | 108.1 kW and 44 kW | 59 % more or 64.1 kW |
Maximum torque | 556 Nm and 189.8 Nm | 66 % more or 366.2 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 5.9 l. and 3.1 l. | 47 % more or 2.8 l. |
Hydraulic system
Unloading time | 1.5 sec and 3.5 sec | 57 % less or 2.0 sec |
Gear box
Maximum reverse gear | 32.7 km/h and 20.1 km/h | 39 % more or 12.6 km/h |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 32.7 km/h and 20.1 km/h | 39 % more or 12.6 km/h |
Forward gears number | 4 and 2 | 50 % more or 2 |
Neutral reasons:
Sizes
Between tyres width | 1761 mm and 2525 mm |
Wheelbase | 2100 mm and 3000 mm |
Height to cab upper part | 2500 mm and 3050 mm |
Hinge axis maximum height | 3131 mm and 3835 mm |
Length with bucket on ground level | 5133 mm and 7180 mm |
Operation
Working weight | 4933.7 kg and 12550 kg |
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 10 degrees and 30 degrees |
Tyre size | 12.5/80 R18 SGL and 20.5-25 |
Motor
Manufacturer | Deutz and Cummins |
Model | F4L2011 and 6 BT 5.9 |
Aspiration | natural aspiration and turbocharging |
Hydraulic system
Overflow valve pressure | 22994 kPa and 20477.4 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Clark C270 powershift |
Images
Sizes
1. Length with bucket on ground level | 5133 mm | 1. Length with bucket on ground level | 7180 mm |
2. Between tyres width | 1761 mm | 2. Between tyres width | 2525 mm |
3. Height to cab upper part | 2500 mm | 3. Height to cab upper part | 3050 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 330 mm | 5. Clearance | 400 mm |
6. Hinge axis maximum height | 3131 mm | 6. Hinge axis maximum height | 3835 mm |
7. Unloading ground clearance at maximum lifting | 2489 mm | 7. Unloading ground clearance at maximum lifting | 2810 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1225 mm |
11. Maximum lifting height | 3012 mm | 11. Maximum lifting height | 3675 mm |